NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional資格取得講座試験トレーニング資料を利用すれば、認定試験に合格するのは簡単になります。うちのAmazonのAWS-DevOps-Engineer-Professional資格取得講座試験トレーニング資料は豊富な経験を持っている専門家が長年の研究を通じて開発されたものです。NewValidDumpsの学習教材は君の初めての試しでAmazonのAWS-DevOps-Engineer-Professional資格取得講座認定試験に合格するのに助けます。 NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional資格取得講座試験トレーニング資料はAmazonのAWS-DevOps-Engineer-Professional資格取得講座認定試験を準備するのリーダーです。NewValidDumpsの AmazonのAWS-DevOps-Engineer-Professional資格取得講座試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。 試して我々専門家たちの真面目さを感じられています。

AmazonのAWS-DevOps-Engineer-Professional資格取得講座試験の準備は重要です。

自分の能力を証明するために、AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional資格取得講座試験に合格するのは不可欠なことです。 ほかの人はあちこちAmazonのAWS-DevOps-Engineer-Professional 全真問題集試験の資料を探しているとき、あなたは問題集の勉強を始めました。準備の段階であなたはリーダーしています。

我々NewValidDumpsは一番行き届いたアフタサービスを提供します。Amazon　AWS-DevOps-Engineer-Professional資格取得講座試験問題集を購買してから、一年間の無料更新を楽しみにしています。あなたにAmazon　AWS-DevOps-Engineer-Professional資格取得講座試験に関する最新かつ最完備の資料を勉強させ、試験に合格させることだと信じます。

Amazon AWS-DevOps-Engineer-Professional資格取得講座 - 「信仰は偉大な感情で、創造の力になれます。

AmazonのAWS-DevOps-Engineer-Professional資格取得講座認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。NewValidDumpsは認定で優秀なIT資料のウエブサイトで、ここでAmazon AWS-DevOps-Engineer-Professional資格取得講座認定試験「AWS Certified DevOps Engineer - Professional」の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。

IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。

AWS-DevOps-Engineer-Professional PDF DEMO:

QUESTION NO: 1
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F

QUESTION NO: 2
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B

QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C

QUESTION NO: 4
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B

QUESTION NO: 5
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D

NewValidDumps のAmazonのAmazon SOA-C02-JPN問題集は１００パーセント検証とテストを通過したもので、認定試験に合格する専門的な指導者です。 Cisco 300-410J - あなたは試験の最新バージョンを提供することを要求することもできます。 CompTIA CV0-004 - それに一年間の無料更新サービスを提供しますから、NewValidDumpsのウェブサイトをご覧ください。 SAP C-THR92-2411 - NewValidDumpsの問題集を利用することは正にその最良の方法です。 もしあなたはIT認証試験に準備している一人でしたら、NewValidDumpsのAmazonのASIS ASIS-CPP「AWS Certified DevOps Engineer - Professional」トレーニング資料を選らんだほうがいいです。

Updated: May 28, 2022