どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。ITの専門者はAmazonのAWS-DevOps-Engineer-Professional試験攻略認定試験があなたの願望を助けって実現できるのがよく分かります。NewValidDumpsはあなたの夢に実現させるサイトでございます。 Amazon AWS-DevOps-Engineer-Professional試験攻略試験を通るのはかなり優れた専門知識が必要です。NewValidDumpsがAmazon AWS-DevOps-Engineer-Professional試験攻略認証試験を助けて通るのウエブサイトでございます。 NewValidDumpsの専門家チームが君の需要を満たすために自分の経験と知識を利用してAmazonのAWS-DevOps-Engineer-Professional試験攻略認定試験対策模擬テスト問題集が研究しました。

AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional そうだったら、下記のものを読んでください。

このような受験生はAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional試験攻略認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。 もし不合格になったら、私たちは全額返金することを保証します。一回だけでAmazonのAWS-DevOps-Engineer-Professional 合格率試験に合格したい？NewValidDumpsは君の欲求を満たすために存在するのです。

NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional試験攻略試験トレーニング資料は必要とするすべての人に成功をもたらすことができます。AmazonのAWS-DevOps-Engineer-Professional試験攻略試験は挑戦がある認定試験です。現在、書籍の以外にインターネットは知識の宝庫として見られています。

Amazon AWS-DevOps-Engineer-Professional試験攻略 - そこで、IT業界で働く人も多くなっています。

世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、AWS-DevOps-Engineer-Professional試験攻略問題集を学ぶ必要があります。弊社のAWS-DevOps-Engineer-Professional試験攻略問題集はあなたにこのチャンスを全面的に与えられます。あなたは自分の望ましいAmazon AWS-DevOps-Engineer-Professional試験攻略問題集を選らんで、学びから更なる成長を求められます。心はもはや空しくなく、生活を美しくなります。

試験問題集が更新されると、NewValidDumpsは直ちにあなたのメールボックスにAWS-DevOps-Engineer-Professional試験攻略問題集の最新版を送ります。あなたは試験の最新バージョンを提供することを要求することもできます。

AWS-DevOps-Engineer-Professional PDF DEMO:

QUESTION NO: 1
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F

QUESTION NO: 2
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B

QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C

QUESTION NO: 4
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B

QUESTION NO: 5
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D

現在IT技術会社に通勤しているあなたは、AmazonのPECB ISO-9001-Lead-Auditor-JPN試験認定を取得しましたか？PECB ISO-9001-Lead-Auditor-JPN試験認定は給料の増加とジョブのプロモーションに役立ちます。 NewValidDumpsは先輩の経験を生かして暦年の試験の材料を編集することを通して、最高のSAP C-C4H45-2408問題集を作成しました。 人によって目標が違いますが、あなたにAmazon　Microsoft AI-900試験に順調に合格できるのは我々の共同の目標です。 うちのAmazonのSAP C_THR83_2411学習教材はNewValidDumpsのIT専門家たちが研究して、実践して開発されたものです。 あなたに高品質で、全面的なSAP C_C4HCX_2405参考資料を提供することは私たちの責任です。

Updated: May 28, 2022