NS0-180試験内容 資格取得

心はもはや空しくなく、生活を美しくなります。世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、NS0-180試験内容問題集を学ぶ必要があります。 NS0-180試験内容問題集は、あなたに異なるシステムバージョンを提供します。あなたの特定の状況に基づいて、あなたに最も適するNS0-180試験内容問題集バージョンを選択できます。 また、NS0-180試験内容問題集に疑問があると、メールで問い合わせてください。

NCSIE NS0-180 弊社の商品が好きなのは弊社のたのしいです。

NCSIE NS0-180試験内容 - NetApp Certified Storage Installation Engineer, Clustered Data ONTAP あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。 NewValidDumps を選択して100%の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。

NewValidDumpsはNetwork ApplianceのNS0-180試験内容認定試験「NetApp Certified Storage Installation Engineer, Clustered Data ONTAP」に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。NewValidDumpsが提供した資料は最も全面的で、しかも更新の最も速いです。

Network Appliance NS0-180試験内容 - NewValidDumpsの問題集は最大のお得だね!

NewValidDumpsにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってNetwork Appliance NS0-180試験内容認証試験に参加する方に対して問題集を研究続けています。君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

NewValidDumpsというサイトをクッリクしたらあなたの願いを果たせます。あなたが最も良いNetwork ApplianceのNS0-180試験内容試験トレーニング資料を見つけましたから、NewValidDumpsの問題と解答を安心に利用してください。

NS0-180 PDF DEMO:

QUESTION NO: 1
What are two supported cluster interconnect switches for the FAS8040 nodes? (Choose two.)
A. Cisco Catalyst 2960
B. Cisco NX5596
C. NetApp CN1610
D. NetApp CN1601
Answer: B,C
Explanation:
Cisco NX5596 is a cluster interconnect switch. NetApp CN1610 is a cluster interconnect switch that can be used for FAS8040 nodes.
Incorrect:
Not A: The Cisco Catalyst 2960 is not a cluster interconnect switch. Not D: NetApp CN1601 is a cluster management switch.
Reference: Clustered Data ONTAP 8.3, Express Setup Guide for 80xx Systems

QUESTION NO: 2
A customer learns that a certain NetApp tool allows remote data collection, intelligent core file handling, and notification of down storage controllers for technical support analysis and troubleshooting.
What is the name of this tool?
A. RSA
B. HWU
C. Synergy
D. HW Assist
Answer: A
Explanation:
Remote Support Agent (RSA) is a remote diagnostics data collector that is embedded directly into the storage controller's remote management device firmware. Remote Support Agent enables a NetApp support engineer to remotely request an automated upload of log files, core files, and other diagnostic information stored in the storage controller and to remotely trigger an on-demand
AutoSupport collection. Incorrect: Not B: The Hardware Universe (HWU) application is NetApp's system configuration solution. Not C: NetApp Synergy is a complete design, deployment and documentation tool. The program enables you to build a very accurate, detailed model of a NetApp storage system. You can represent most aspects of a storage deployment including the hardware configuration and the sizing of all storage containers, including aggregates, volumes, qtrees and
LUNs.
Reference: Clustered Data ONTAP 8.2, Remote Support Agent Configuration Guide, Page 5

QUESTION NO: 3
You want to create a data volume on aggr0 and you receive a message with the following warning:
''Warning: You are about to create a volume on a root aggregate. This may cause severe performance or stability problems and therefore is not recommended. Do you want to proceed?''
What is the reason for this severe performance or stability problem?
A. Controller failover and storage failover are separate processes that must occur in parallel, otherwise problems will arise.
B. The performance load generated by the data volume can be very strong, so it should not be shared with vol0 on aggr0, requiring a separate aggregate for it.
C. The performance load generated by the vol0 cannot be shared with any other volume on aggr0, requiring a dedicated aggregate for it.
D. Controller failover and storage failover are separate processes that must occur at different times, otherwise problems will arise.
Answer: B
Explanation:
One possibly cause is Disk I/O contention on the data volume. The root volume in Cluster-Mode is used to store and update various tables of the replicated database. Crucial information regarding the locations of LIFs, volumes, aggregates, and different jobs required to run in the cluster are stored in these tables. If a root aggregate has very busy data volumes, the disks in the aggregate will experience higher latency. When a node is unable to update its copy of the replicated database fast enough, it will consider itself unhealthy and stop serving all the data until it can catch up. This is extremely disruptive and affects all the volumes on the node, even if the cause is related to the data volumes stored on the root aggregate only.
Reference:
Why is a warning displayed when attempting to create one or more data volumes in the root aggregate in Data ONTAP Cluster-Mode?
https://kb.netapp.com/support/index?id=3013563&page=content&locale=en_US

QUESTION NO: 4
Click the Exhibit button.
You are asked to install a new cluster with six FAS8060 nodes. While running Config Advisor, you see the messages shown in the exhibit. The customer does not want ACP cabled on their cluster.
Which two actions would allow the installation to be completed successfully? (Choose two.)
A. Advise NGS that the customer has a controller in an unsupported state.
B. Advise the customer that they must acknowledge that they are not using ACP on the installation.
C. Advise the sales team that the customer is operating without ACP and that the customer is asking you to leave it that way.
D. Advise the customer that the error will cause the controller to not operate properly and create an unsupported state.
Answer: B,C
Explanation:
After you cable the SAS connections, you have the option to cable the Alternative Control Path (ACP) connections. You should use the ACP protocol because it enables Data ONTAP to manage and control the SAS disk shelf storage subsystem

QUESTION NO: 5
Which two statements are true regarding SSDs? (Choose two.)
A. SSDs are only available in 400 GB sizes.
B. SSDs must be in different RAID groups than HDDs.
C. SSDs are available for multi-disk carrier shelves.
D. The Maintenance Center is not available for SSDs.
Answer: B,D
Explanation:
Incorrect: Not A: There are, for example, 100 GB, 200 GB, and 800 GB SSD sizes. Not C: Disks in multi- disk carriers always have the Data ONTAP disk type of MSATA.

弊社のFortinet NSE5_FMG-7.2のトレーニング資料を買ったら、一年間の無料更新サービスを差し上げます。 CompTIA PT0-002 - それは実践の検査に合格したソフトですから、全ての関連するIT認証に満たすことができます。 EMC D-VXR-DY-01 - NewValidDumpsには専門的なエリート団体があります。 NewValidDumpsあなたに 最高のNetwork ApplianceのLinux Foundation HFCP試験問題集を提供して差し上げます。 HP HP2-I60 - 試験の目標が変わる限り、あるいは我々の勉強資料が変わる限り、すぐに更新して差し上げます。

Updated: May 28, 2022

NS0-180試験内容 & Network Appliance NetApp Certified Storage Installation Engineer, Clustered Data ONTAP最新資料

PDF問題と解答

試験コード:NS0-180
試験名称:NetApp Certified Storage Installation Engineer, Clustered Data ONTAP
最近更新時間:2024-05-17
問題と解答:全 65
Network Appliance NS0-180 復習対策書

  ダウンロード


 

模擬試験

試験コード:NS0-180
試験名称:NetApp Certified Storage Installation Engineer, Clustered Data ONTAP
最近更新時間:2024-05-17
問題と解答:全 65
Network Appliance NS0-180 試験解答

  ダウンロード


 

オンライン版

試験コード:NS0-180
試験名称:NetApp Certified Storage Installation Engineer, Clustered Data ONTAP
最近更新時間:2024-05-17
問題と解答:全 65
Network Appliance NS0-180 資格勉強

  ダウンロード


 

NS0-180 コンポーネント