全てのIT専門人員はMicrosoftの70-768資格認定の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Microsoftの70-768資格認定の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。NewValidDumpsのMicrosoftの70-768資格認定試験トレーニング資料を利用したら、望むことを取得できます。 我々の提供するPDF版のMicrosoftの70-768資格認定試験の資料はあなたにいつでもどこでも読めさせます。我々もオンライン版とソフト版を提供します。 それはNewValidDumpsのMicrosoftの70-768資格認定試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。

MCSA 70-768 従って、NewValidDumpsは皆の信頼を得ました。

この問題集の合格率は高いので、多くのお客様から70-768 - Developing SQL Data Models資格認定問題集への好評をもらいました。 二つのバージョンのどちらでもダウンロードできますから、NewValidDumpsのサイトで検索してダウンロードすることができます。体験してから購入するかどうかを決めてください。

NewValidDumpsは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。そして、弊社が提供した問題集を安心で使用して、試験を安心で受けて、君のMicrosoft 70-768資格認定認証試験の１００％の合格率を保証しますす。NewValidDumpsにたくさんのIT専門人士がいって、弊社の問題集に社会のITエリートが認定されて、弊社の問題集は試験の大幅カーバして、合格率が１００％にまで達します。

Microsoft 70-768資格認定 - もし弊社の問題集を勉強してそれは簡単になります。

時間とお金の集まりより正しい方法がもっと大切です。Microsoftの70-768資格認定試験のために勉強していますなら、NewValidDumpsの提供するMicrosoftの70-768資格認定試験ソフトはあなたの選びの最高です。我々の目的はあなたにMicrosoftの70-768資格認定試験に合格することだけです。試験に失敗したら、弊社は全額で返金します。我々の誠意を信じてください。あなたが順調に試験に合格するように。

弊社の資料を使って、１００％に合格を保証いたします。NewValidDumpsはIT試験問題集を提供するウエブダイトで、ここによく分かります。

70-768 PDF DEMO:

QUESTION NO: 1
You are developing a SQL Server Analysis Services (SSAS) tabular project.
In the data warehouse, a table named Sales Persons and Territories defines a relationship between a salesperson's name, logon ID, and assigned sales territory.
You need to ensure that each salesperson has access to data from only the sales territory assigned to that salesperson. You need to use the least amount of development effort to achieve this goal.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Create a new role named Sales Persons with Read permission. Add each salesperson's logon as a member to the role.
B. Add the Sales Persons and Territories table to the model, define the relationships, and then implement dynamic security by using row filters. Grant each salesperson access to the model.
C. Create a new Active Directory Domain Services (AD DS) security group and add each salesperson as a member. Then create a new role named Sales Persons with Read permission. Add the group as a member to the new role.
D. Create a separate tabular model for each sales territory and assign each tabular model a corresponding sales territory name. Grant each salesperson access to the corresponding tabular model of the assigned sales territory.
Answer: B

QUESTION NO: 2
You are developing a SQL Server Analysis Services (SSAS) tabular project.
A column named City must be added to the table named Customer. The column will be used in the definition of a hierarchy. The City column exists in the Geography table that is related to the
Customer table.
You need to add the City column to the Customer table.
How should you write the calculation?
A. City:= LOOKUP(Geography[City],Geography[GeographyKey],[GeographyKey])
B. City:= LOOKUPVALUE(Geography[City],Geography[GeographyKey],[GeographyKey]) C
.=RELATED(Geography[City])
C. =RELATED(Geography.City)
D. =VALUES(Geography[City])
E. City:=VALUES(Geography[City])
Answer: C
Explanation: * RELATED Function
Returns a related value from another table.

QUESTION NO: 3
DRAG DROP
You install a SQL Server Analysis Services (SSAS) instance in tabular mode on a server.
While processing a very large tabular model, you receive an out-of-memory error. You identify that the amount of physical memory in the server is insufficient. Additional physical memory cannot be installed in the server.
You need to configure the server to allow paging to disk by using the operating system page file
(pagefile.sys).
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Explanation:
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* View or set configuration properties in Management Studio
*
In SQL Server Management Studio, connect to an Analysis Services instance.
In Object Explorer, right-click the Analysis Services instance, and then clickProperties.
The General page appears, displaying the more commonly used properties.
*
To view additional properties, click theShow Advanced (All) Propertiescheckbox at the bottom of the page.
Modifying server properties is supported only for tabular mode and multidimensional mode servers.
If you installed PowerPivot for SharePoint, always use the default values unless you are directed otherwise by a Microsoft product support engineer.
* VertiPaqPagingPolicy
Specifies the paging behavior in the event the server runs low on memory. Valid values are as follows:
Zero (0) is the default. No paging is allowed. If memory is insufficient, processing fails with an out-of- memory error.
1 enables paging to disk using the operating system page file (pagefile.sys).
When VertiPaqPagingPolicy is set to 1, processing is less likely to fail due to memory constraints because the server will try to page to disk using the method that you specified.
Setting the VertiPaqPagingPolicy property does not guarantee that memory errors will never happen.
Out of memory errors can still occur under the following conditions:
There is not enough memory for all dictionaries. During processing, Analysis Services locks the dictionaries for each column in memory, and all of these together cannot be more than the value specified for VertiPaqMemoryLimit.
There is insufficient virtual address space to accommodate the process.
To resolve persistent out of memory errors, you can either try to redesign the model to reduce the amount of data that needs processing, or you can add more physical memory to the computer.
Applies to tabular server mode only
* Incorrect: VertiPaqMemoryLimit
If paging to disk is allowed, this property specifies the level of memory consumption (as a percentage of total memory) at which paging starts. The default is 60. If memory consumption is less than 60 percent, the server will not page to disk.
This property depends on the VertiPaqPagingPolicyProperty, which must be set to 1 in order for paging to occur.
Applies to tabular server mode only.

QUESTION NO: 4
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server Analysis Services (SSAS) instance that is configured to use multidimensional mode. You create the following cube:
Users need to be able to analyze sales by product and color.
You need to create the dimension.
Which relationship type should you use between the InternetSales table and the new dimension?
A. no relationship
B. regular
C. fact
D. referenced
E. many-to-many
F. data mining
Answer: D
Explanation:
A reference dimension relationship between a cube dimension and a measure group exists when the key column for the dimension is joined indirectly to the fact table through a key in another dimension table, as shown in the following illustration.
A reference dimension relationship represents the relationship between dimension tables and a fact table in a snowflake schema design. When dimension tables are connected in a snowflake schema, you can define a single dimension using columns from multiple tables, or you can define separate dimensions based on the separate dimension tables and then define a link between them using the reference dimension relationship setting. The following figure shows one fact table named
InternetSales, and two dimension tables called Customer and Geography, in a snowflake schema.
You can create two dimensions related to the InternetSales measure group: a dimension based on the Customer table, and a dimension based on the Geography table. You can then relate the
Geography dimension to the InternetSales measure group using a reference dimension relationship using the Customer dimension.

QUESTION NO: 5
DRAG DROP
You need to configure the SalesAnalysis cube to correct the sales analysis by customer calculation.
Which four actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Open the cube editor, and open the Dimension Usage tab.
Step 2: Configure a relationship between the Customer dimension and the Sales measure group. Use
Day as the granularity.
From scenario: The SalesAnalysis cube contains a fact table named CoffeeSale loaded from a table named FactSale in the data warehouse.
The time granularity within the cube is 15 minutes.
The cube is processed every night at 23:00. You determine that the fact table cannot be fully processed in the expected time. Users have reported slow query response times.
Step 3: Reprocess the cube.
Step 4: Deploy the project changes.

自分のIT業界での発展を希望したら、MicrosoftのISC CISSP試験に合格する必要があります。 多くのMicrosoftのSAP C_S4CPR_2402認定試験を準備している受験生がいろいろなSAP C_S4CPR_2402「Developing SQL Data Models」認証試験についてサービスを提供するサイトオンラインがみつけたがNewValidDumpsはIT業界トップの専門家が研究した参考材料で権威性が高く、品質の高い教育資料で、一回に参加する受験者も合格するのを確保いたします。 弊社のCompTIA 220-1101J問題集はあなたにこのチャンスを全面的に与えられます。 MicrosoftのHuawei H23-221_V1.0認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、NewValidDumpsが対応性の訓練が提供いたします。 短時間でMicrosoft MB-335試験に一発合格したいなら、我々社のMicrosoftのMicrosoft MB-335資料を参考しましょう。

Updated: May 28, 2022