AWS-DevOps-Engineer-Professional日本語版問題集 資格取得

あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっと望んでいるでしょう。 NewValidDumpsのトレーニング資料は100パーセントの合格率を保証しますから、あなたのニーズを満たすことができます。空想は人間が素晴らしいアイデアをたくさん思い付くことができますが、行動しなければ何の役に立たないのです。 NewValidDumpsのAWS-DevOps-Engineer-Professional日本語版問題集教材を購入したら、あなたは一年間の無料アップデートサービスを取得しました。

AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional 今教えてあげますよ。

NewValidDumpsのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験AWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版問題集参考書を見つけてください。 AmazonのAWS-DevOps-Engineer-Professional トレーリングサンプル認定試験を受験する気があるのですか。この試験を受けた身の回りの人がきっと多くいるでしょう。

NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional日本語版問題集試験トレーニング資料は豊富な経験を持っているIT専門家が研究したものです。君がAmazonのAWS-DevOps-Engineer-Professional日本語版問題集問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。もしAmazonのAWS-DevOps-Engineer-Professional日本語版問題集問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。

Amazon AWS-DevOps-Engineer-Professional日本語版問題集 - 我々もオンライン版とソフト版を提供します。

AmazonのAWS-DevOps-Engineer-Professional日本語版問題集試験のために不安なのですか。弊社のソフトは買うたるかどうかまだ疑問がありますか。そうであれば、無料で弊社の提供するAmazonのAWS-DevOps-Engineer-Professional日本語版問題集のデモをダウンロードしてみよう。我々提供する資料はあなたの需要だと知られています。あなたのAmazonのAWS-DevOps-Engineer-Professional日本語版問題集試験に参加する圧力を減ってあなたの効率を高めるのは我々の使命だと思います。

我々NewValidDumpsはAmazonのAWS-DevOps-Engineer-Professional日本語版問題集試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確のAWS-DevOps-Engineer-Professional日本語版問題集試験問題集を開発するのに準備します。

AWS-DevOps-Engineer-Professional PDF DEMO:

QUESTION NO: 1
You currently have the following setup in AWS
1) An Elastic Load Balancer
2) Auto Scaling Group which launches EC2 Instances
3) AMIs with your code pre-installed
You want to deploy the updates of your app to only a certain number of users. You want to have a cost-effective solution. You should also be able to revert back quickly. Which of the below solutions is the most feasible one?
A. Create a full second stack of instances, cut the DNS over to the new stack of instances, and change the DNS back if a rollback is needed.
B. Create new AM Is with the new app. Then use the new EC2 instances in half proportion to the older instances.
C. Redeploy with AWS Elastic Beanstalk and Elastic Beanstalk versions. Use Route 53 Weighted
Round Robin records to adjust the proportion of traffic hitting the two ELBs
D. Create a second ELB, and a new Auto Scaling Group assigned a new Launch Configuration. Create a new AMI with the updated app. Use Route53 Weighted Round Robin records to adjust the proportion of traffic hitting the two ELBs.
Answer: D
Explanation
The Weighted Routing policy of Route53 can be used to direct a proportion of traffic to your application. The best option is to create a second CLB, attach the new Autoscaling Group and then use Route53 to divert the traffic.
Option B is wrong because just having EC2 instances running with the new code will not help.
Option C is wrong because Clastic beanstalk is good for development environments, and also there is no mention of having 2 environments where environment url's can be swapped.
Option D is wrong because you still need Route53 to split the traffic.
For more information on Route53 routing policies, please refer to the below link:
* http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html

QUESTION NO: 2
A company hosts parts of a Python-based application using AWS Elastic Beanstalk. An Elastic
Beanstalk CLI is being used to create and update the environments. The Operations team detected an increase in requests in one of the Elastic Beanstalk environments that caused downtime overnight.
The team noted that the policy used for AWS Auto Scaling is NetworkOut. Based on load testing metrics, the team determined that the application needs to scale CPU utilization to improve the resilience of the environments. The team wants to implement this across all environments automatically.
Following AWS recommendations, how should this automation be implemented?
A. Using ebextensions, create a custom resource that modifies the AWSEBAutoScalingScaleUpPolicy and AWSEBAutoScalingScaleDownPolicy resources to use CPUUtilization as a metric to scale for the
Auto Scaling group.
B. Using ebextensions, place a script within the files key and place it in
/opt/elasticbeanstalk/hooks/appdeploy/pre to perform an API call to modify the scaling metric to
CPUUtilization for the Auto Scaling configuration. Use leader_only to place this script in only the first instance launched within the environment.
C. Using ebextensions, place a command within the container_commands key to perform an API call to modify the scaling metric to CPUUtilization for the Auto Scaling configuration. Use leader_only to execute this command in only the first instance launched within the environment.
D. Using ebextensions, configure the option setting MeasureName to CPUUtilization within the aws:autoscaling:trigger namespace.
Answer: D

QUESTION NO: 3
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D

QUESTION NO: 4
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B

QUESTION NO: 5
According to Information Security Policy, changes to the contents of objects inside production
Amazon S3 bucket that contain encrypted secrets should only be made by a trusted group of administrators.
How should a DevOps Engineer create real-time, automated checks to meet this requirement?
A. Create a metrics filter for Amazon CloudWatch logs to check for Amazon S3 bucket-level permission changes and to check the IAM user's membership in an administrator's IAM role.
B. Create an AWS Lambda function that is triggered by Amazon S3 data events for object changes and that also checks the IAM user's membership in an administrator's IAM role.
C. Create a periodic AWS Config rule to query AWS CloudTrail logs for changes to the Amazon S3 bucket-level permissions and to check the IAM user's membership in an administrator's IAM role.
D. Create a periodic AWS Config rule to query Amazon S3 Logs for changes and to check the IAM user's membership in an administrator's IAM role.
Answer: B

Veritas VCS-284 - そうでない場合、今回使用してからあなたがNewValidDumpsを必要な選択肢として使用できるようになります。 ほんとんどお客様は我々NewValidDumpsのAmazon Microsoft AZ-700問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。 NewValidDumpsは多くの受験生を助けて彼らにAmazonのMicrosoft SC-300J試験に合格させることができるのは我々専門的なチームがAmazonのMicrosoft SC-300J試験を研究して解答を詳しく分析しますから。 Adobe AD0-E126問題集のカーバー率が高いので、勉強した問題は試験に出ることが多いです。 AmazonのMicrosoft MS-102J試験のソフトは問題数が豊富であなたに大量の練習で能力を高めさせます。

Updated: May 28, 2022

AWS-DevOps-Engineer-Professional 日本語版問題集 - Amazon AWS-DevOps-Engineer-Professional 試験問題 & AWS Certified DevOps Engineer Professional (DOP C01)

PDF問題と解答

試験コード:AWS-DevOps-Engineer-Professional
試験名称:AWS Certified DevOps Engineer - Professional (DOP-C01)
最近更新時間:2024-11-21
問題と解答:全 275
Amazon AWS-DevOps-Engineer-Professional トレーニング資料

  ダウンロード


 

模擬試験

試験コード:AWS-DevOps-Engineer-Professional
試験名称:AWS Certified DevOps Engineer - Professional (DOP-C01)
最近更新時間:2024-11-21
問題と解答:全 275
Amazon AWS-DevOps-Engineer-Professional テスト資料

  ダウンロード


 

オンライン版

試験コード:AWS-DevOps-Engineer-Professional
試験名称:AWS Certified DevOps Engineer - Professional (DOP-C01)
最近更新時間:2024-11-21
問題と解答:全 275
Amazon AWS-DevOps-Engineer-Professional 独学書籍

  ダウンロード


 

AWS-DevOps-Engineer-Professional 合格率書籍

AWS-DevOps-Engineer-Professional 問題トレーリング 関連試験