IT業界で働いている多くの人はAmazonのAWS-DevOps資格試験試験の準備が大変だと知っています。我々NewValidDumpsはAWS-DevOps資格試験試験の難しさを減らないとは言え、試験準備の難しさを減ることができます。我々の提供する問題集を体験してから、あなたはAmazonのAWS-DevOps資格試験試験に合格できる自信を持っています。 また、NewValidDumpsのAmazonのAWS-DevOps資格試験試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。NewValidDumpsのAmazonのAWS-DevOps資格試験試験トレーニング資料を利用したらきっと成功できますから、NewValidDumpsを選ばない理由はないです。 ほかの人はあなたの成績に驚いているとき、ひょっとしたら、あなたはよりよい仕事を探しましたかもしれません。

その中で、AWS-DevOps資格試験認定試験は最も重要な一つです。

AWS Certified DevOps Engineer AWS-DevOps資格試験 - AWS Certified DevOps Engineer - Professional (DOP-C01) もし運が良くないとき、失敗したら、お金を返してあなたの経済損失を減らします。 早速買いに行きましょう。NewValidDumpsのAmazonのAWS-DevOps 難易度試験トレーニング資料を使ったら、君のAmazonのAWS-DevOps 難易度認定試験に合格するという夢が叶えます。

Amazon　AWS-DevOps資格試験資格認定はバッジのような存在で、あなたの所有する専業技術と能力を上司に直ちに知られさせます。次のジョブプロモーション、プロジェクタとチャンスを申し込むとき、Amazon　AWS-DevOps資格試験資格認定はライバルに先立つのを助け、あなたの大業を成し遂げられます。

Amazon AWS-DevOps資格試験 - それは正確性が高くて、カバー率も広いです。

あなたは今やはりAWS-DevOps資格試験試験に悩まされていますか？長い時間AWS-DevOps資格試験試験を取り組んいる弊社はあなたにAWS-DevOps資格試験練習問題を提供できます。あなたはAWS-DevOps資格試験試験に興味を持たれば、今から行動し、AWS-DevOps資格試験練習問題を買いましょう。AWS-DevOps資格試験試験に合格するために、AWS-DevOps資格試験練習問題をよく勉強すれば、いい成績を取ることが難しいことではありません。つまりAWS-DevOps資格試験練習問題はあなたの最も正しい選択です。

もちろん、我々はあなたに一番安心させるのは我々の開発する多くの受験生に合格させるAmazonのAWS-DevOps資格試験試験のソフトウェアです。我々はあなたに提供するのは最新で一番全面的なAmazonのAWS-DevOps資格試験問題集で、最も安全な購入保障で、最もタイムリーなAmazonのAWS-DevOps資格試験試験のソフトウェアの更新です。

AWS-DevOps PDF DEMO:

QUESTION NO: 1
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B

QUESTION NO: 2
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B

QUESTION NO: 3
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C

QUESTION NO: 4
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A

QUESTION NO: 5
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F

先月、Microsoft MS-102試験に参加しました。 AmazonのHP ACSPの購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのAmazonのHP ACSP試験に一番信頼できるヘルプを提供します。 あなたはその他のAmazon Microsoft MB-230「AWS Certified DevOps Engineer - Professional (DOP-C01)」認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、NewValidDumpsの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。 Amazon SAA-C03-KR - 社会と経済の発展につれて、多くの人はIT技術を勉強します。 NewValidDumpsを通じて最新のAmazonのIIA IIA-CIA-Part1-KR試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。

Updated: May 28, 2022