NewValidDumpsのMicrosoftのAZ-104試験勉強書試験トレーニング資料は豊富な経験を持っているIT専門家が研究したものです。君がMicrosoftのAZ-104試験勉強書問題集を購入したら、私たちは一年間で無料更新サービスを提供することができます。もしMicrosoftのAZ-104試験勉強書問題集は問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。 常にMicrosoft　AZ-104試験勉強書試験に参加する予定があるお客様は「こちらの問題集には、全部で何問位、掲載されておりますか？」といった質問を提出しました。心配なくて我々NewValidDumpsのMicrosoft　AZ-104試験勉強書試験問題集は実際試験のすべての問題種類をカバーします。 弊社のNewValidDumpsはIT認定試験のソフトの一番信頼たるバンドになるという目標を達成するために、弊社はあなたに最新版のMicrosoftのAZ-104試験勉強書試験問題集を提供いたします。

Microsoft Azure Administrator Associate AZ-104 ITを通して自分の実力を証明したいのですか。

Microsoft Azure Administrator Associate AZ-104試験勉強書 - Microsoft Azure Administrator NewValidDumpsで、あなたの試験のためのテクニックと勉強資料を見つけることができます。 それは NewValidDumpsのAZ-104 認定試験トレーリング問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。真剣にNewValidDumpsのMicrosoft AZ-104 認定試験トレーリング問題集を勉強する限り、受験したい試験に楽に合格することができるということです。

NewValidDumpsのAZ-104試験勉強書問題集の合格率が100%に達することも数え切れない受験生に証明された事実です。もし試験の準備をするために大変を感じているとしたら、ぜひNewValidDumpsのAZ-104試験勉強書問題集を見逃さないでください。これは試験の準備をするために非常に効率的なツールですから。

Microsoft AZ-104試験勉強書 - 不思議でしょう。

AZ-104試験勉強書認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまAZ-104試験勉強書試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいAZ-104試験勉強書試験に関連する参考書が登場しますよ。それはNewValidDumpsのAZ-104試験勉強書問題集です。気楽に試験に合格したければ、はやく試しに来てください。

それは正確的な試験の内容を保証しますし、良いサービスで、安い価格で営業します。NewValidDumpsがあれば、MicrosoftのAZ-104試験勉強書試験に合格するのは心配しません。

AZ-104 PDF DEMO:

QUESTION NO: 1
You need to prepare the environment to meet the authentication requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
A. a Recovery Services vault and a backup policy
B. an Azure Key Vault and an access policy
C. Azure Active Directory (AD) Identity Protection and an Azure policy
D. an Azure Storage account and an access policy
Answer: A,D
Explanation:
D: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization or
Pass-through Authentication, and can be enabled via Azure AD Connect.
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure AD
URL to all or selected users' Intranet zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com Incorrect Answers:
A: Seamless SSO needs the user's device to be domain-joined, but doesn't need for the device to be
Azure AD Joined.
C: Azure AD connect does not port 8080. It uses port 443.
E: Seamless SSO is not applicable to Active Directory Federation Services (ADFS).
Scenario: Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure
AD Seamless SSO) when accessing resources in Azure.
Planned Azure AD Infrastructure include: The on-premises Active Directory domain will be synchronized to Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory- aadconnect-sso-quick-start

QUESTION NO: 2
You have an Azure subscription that contains a user account named User1.
You need to ensure that User1 can assign a policy to the tenant root management group.
What should you do?
A. Assign the Owner role to User1, and then modify the default conditional access policies.
B. Assign the Owner role to User1, and then instruct User1 to configure access management for
Azure resources.
C. Assign the Global administrator role to User1, and then instruct User1 to configure access management for Azure resources.
D. Assign the Global administrator role to User1, and then modify the default conditional access policies.
Answer: B

QUESTION NO: 3
You have an Azure subscription that contains an Azure Availability Set named WEBPROD-AS-
USE2 as shown in the following exhibit.
You add 14 virtual machines to WEBPROD-AS-USE2.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:

QUESTION NO: 4
You need to use Azure Automation State Configuration to manage the ongoing consistency of virtual machine configurations.
Which five actions should you perform in sequence? To answer, move the appropriate action from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Step 1: Upload a configuration to Azure Automation State Configuration.
Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF document), and placed on the Automation DSC Pull Server.
Step 3: Onboard the virtual machines to Azure Automation State Configuration.
Onboard the Azure VM for management with Azure Automation State Configuration Step 4: Assign the node configuration Step 5: Check the compliance status of the node Each time Azure Automation
State Configuration performs a consistency check on a managed node, the node sends a status report back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding consistency check:
The report status - whether the node is "Compliant", the configuration "Failed", or the node is "Not
Compliant" References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started

QUESTION NO: 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network that has a subnet named Subnet1
* Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
* A virtual machine named VM1 that has the required Windows Server configurations to allow
Remote Desktop connections NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
* Priority: 100
* Source: Any
* Source port range: *
* Destination: *
* Destination port range: 3389
* Protocol: UDP
* Action: Allow
VM1 connects to Subnet1. NSG1-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 that allows connections from the Internet source to the VirtualNetwork destination for port range 3389 and uses the UDP protocol.
Does this meet the goal?
A. No
B. Yes
Answer: A

OMG OMG-OCSMP-MU100 - ここには、私たちは君の需要に応じます。 NewValidDumpsでは、私たちは君のすべての夢を叶えさせて、君の最も早い時間でMicrosoftのCompTIA FC0-U61J認定試験に合格するということを保証します。 うちのMicrosoftのMicrosoft MB-230試験トレーニング資料を購入する前に、NewValidDumpsのサイトで、一部分のフリーな試験問題と解答をダンロードでき、試用してみます。 HRCI PHRca - もし君はいささかな心配することがあるなら、あなたはうちの商品を購入する前に、NewValidDumpsは無料でサンプルを提供することができます。 SAP C_C4H63_2411 - 我々の誠意を信じてください。

Updated: May 28, 2022