この問題集はAWS-DevOps-Engineer-Professional日本語版参考書認定試験に関連する最も優秀な参考書ですから。最近、Amazonの認定試験はますます人気があるようになっています。それと同時に、Amazonの認証資格ももっと重要になっています。 購入した前の無料の試み、購入するときのお支払いへの保障、購入した一年間の無料更新AmazonのAWS-DevOps-Engineer-Professional日本語版参考書試験に失敗した全額での返金…これらは我々のお客様への承諾です。常々、時間とお金ばかり効果がないです。 それに、もし最初で試験を受ける場合、試験のソフトウェアのバージョンを使用することができます。

AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional できるだけ100％の通過率を保証使用にしています。

NewValidDumpsのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版参考書問題集は実際のAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)日本語版参考書認定試験と同じです。 ただ、社会に入るIT卒業生たちは自分能力の不足で、AWS-DevOps-Engineer-Professional 日本語版受験参考書試験向けの仕事を探すのを悩んでいますか？それでは、弊社のAmazonのAWS-DevOps-Engineer-Professional 日本語版受験参考書練習問題を選んで実用能力を速く高め、自分を充実させます。その結果、自信になる自己は面接のときに、面接官のいろいろな質問を気軽に回答できて、順調にAWS-DevOps-Engineer-Professional 日本語版受験参考書向けの会社に入ります。

うちの学習教材の内容は正確性が高くて、AmazonのAWS-DevOps-Engineer-Professional日本語版参考書認定試験に合格する率は１００パッセントになっていました。NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional日本語版参考書試験トレーニング資料を手に入れたら、あなたは認定試験に合格する鍵を手に入れるというのに等しいです。この認定は君のもっと輝い職業生涯と未来に大変役に立ちます。

Amazon AWS-DevOps-Engineer-Professional日本語版参考書 - 試験に失敗したら、弊社は全額で返金します。

多分、AWS-DevOps-Engineer-Professional日本語版参考書テスト質問の数が伝統的な問題の数倍である。Amazon　AWS-DevOps-Engineer-Professional日本語版参考書試験参考書は全ての知識を含めて、全面的です。そして、AWS-DevOps-Engineer-Professional日本語版参考書試験参考書の問題は本当の試験問題とだいたい同じことであるとわかります。AWS-DevOps-Engineer-Professional日本語版参考書試験参考書があれば,ほかの試験参考書を勉強する必要がないです。

我々のソフトは多くの受験生にAmazonのAWS-DevOps-Engineer-Professional日本語版参考書試験に合格させました。我々の通過率はいくつ高くても、我々はあなたが試験に失敗したら全額で返金するのを保証します。

AWS-DevOps-Engineer-Professional PDF DEMO:

QUESTION NO: 1
You currently have the following setup in AWS
1) An Elastic Load Balancer
2) Auto Scaling Group which launches EC2 Instances
3) AMIs with your code pre-installed
You want to deploy the updates of your app to only a certain number of users. You want to have a cost-effective solution. You should also be able to revert back quickly. Which of the below solutions is the most feasible one?
A. Create a full second stack of instances, cut the DNS over to the new stack of instances, and change the DNS back if a rollback is needed.
B. Create new AM Is with the new app. Then use the new EC2 instances in half proportion to the older instances.
C. Redeploy with AWS Elastic Beanstalk and Elastic Beanstalk versions. Use Route 53 Weighted
Round Robin records to adjust the proportion of traffic hitting the two ELBs
D. Create a second ELB, and a new Auto Scaling Group assigned a new Launch Configuration. Create a new AMI with the updated app. Use Route53 Weighted Round Robin records to adjust the proportion of traffic hitting the two ELBs.
Answer: D
Explanation
The Weighted Routing policy of Route53 can be used to direct a proportion of traffic to your application. The best option is to create a second CLB, attach the new Autoscaling Group and then use Route53 to divert the traffic.
Option B is wrong because just having EC2 instances running with the new code will not help.
Option C is wrong because Clastic beanstalk is good for development environments, and also there is no mention of having 2 environments where environment url's can be swapped.
Option D is wrong because you still need Route53 to split the traffic.
For more information on Route53 routing policies, please refer to the below link:
* http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html

QUESTION NO: 2
A company hosts parts of a Python-based application using AWS Elastic Beanstalk. An Elastic
Beanstalk CLI is being used to create and update the environments. The Operations team detected an increase in requests in one of the Elastic Beanstalk environments that caused downtime overnight.
The team noted that the policy used for AWS Auto Scaling is NetworkOut. Based on load testing metrics, the team determined that the application needs to scale CPU utilization to improve the resilience of the environments. The team wants to implement this across all environments automatically.
Following AWS recommendations, how should this automation be implemented?
A. Using ebextensions, create a custom resource that modifies the AWSEBAutoScalingScaleUpPolicy and AWSEBAutoScalingScaleDownPolicy resources to use CPUUtilization as a metric to scale for the
Auto Scaling group.
B. Using ebextensions, place a script within the files key and place it in
/opt/elasticbeanstalk/hooks/appdeploy/pre to perform an API call to modify the scaling metric to
CPUUtilization for the Auto Scaling configuration. Use leader_only to place this script in only the first instance launched within the environment.
C. Using ebextensions, place a command within the container_commands key to perform an API call to modify the scaling metric to CPUUtilization for the Auto Scaling configuration. Use leader_only to execute this command in only the first instance launched within the environment.
D. Using ebextensions, configure the option setting MeasureName to CPUUtilization within the aws:autoscaling:trigger namespace.
Answer: D

QUESTION NO: 3
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D

QUESTION NO: 4
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B

QUESTION NO: 5
According to Information Security Policy, changes to the contents of objects inside production
Amazon S3 bucket that contain encrypted secrets should only be made by a trusted group of administrators.
How should a DevOps Engineer create real-time, automated checks to meet this requirement?
A. Create a metrics filter for Amazon CloudWatch logs to check for Amazon S3 bucket-level permission changes and to check the IAM user's membership in an administrator's IAM role.
B. Create an AWS Lambda function that is triggered by Amazon S3 data events for object changes and that also checks the IAM user's membership in an administrator's IAM role.
C. Create a periodic AWS Config rule to query AWS CloudTrail logs for changes to the Amazon S3 bucket-level permissions and to check the IAM user's membership in an administrator's IAM role.
D. Create a periodic AWS Config rule to query Amazon S3 Logs for changes and to check the IAM user's membership in an administrator's IAM role.
Answer: B

AmazonのEC-COUNCIL 312-38_JPNの認定試験に合格すれば、就職機会が多くなります。 弊社の専門家たちのAmazonのSnowflake SnowPro-Core試験への研究はAmazonのSnowflake SnowPro-Coreソフトの高効率に保障があります。 Fortinet NSE5_FMG-7.2-JPN - あなたの全部な需要を満たすためにいつも頑張ります。 あなたに相応しいSalesforce Salesforce-Marketing-Associate問題集を購入できさせるには、Amazonは問題集の見本を無料に提供し、あなたはダウンロードしてやることができます。 NewValidDumpsの専門家チームがAmazonのCheckPoint 156-536認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。

Updated: May 28, 2022