我々の提供するPDF版のAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験の資料はあなたにいつでもどこでも読めさせます。我々もオンライン版とソフト版を提供します。すべては豊富な内容があって各自のメリットを持っています。 AmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題の認定試験は君の実力を考察するテストでございます。AmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題の認定試験に合格すれば、就職機会が多くなります。 我々NewValidDumpsはAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。

AWS Certified DevOps Engineer AWS-DevOps-Engineer-Professional でも、成功へのショートカットがを見つけました。

購入した前の無料の試み、購入するときのお支払いへの保障、購入した一年間の無料更新AmazonのAWS-DevOps-Engineer-Professional - AWS Certified DevOps Engineer - Professional (DOP-C01)テストサンプル問題試験に失敗した全額での返金…これらは我々のお客様への承諾です。 しかも１００パーセントの合格率を保証できます。NewValidDumpsのAmazonのAWS-DevOps-Engineer-Professional 認定デベロッパー試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。

NewValidDumpsは多くの受験生を助けて彼らにAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験に合格させることができるのは我々専門的なチームがAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験を研究して解答を詳しく分析しますから。試験が更新されているうちに、我々はAmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験の資料を更新し続けています。できるだけ100％の通過率を保証使用にしています。

Amazon AWS-DevOps-Engineer-Professionalテストサンプル問題 - きっと君に失望させないと信じています。

このインターネット時代において、社会の発展とともに、コストがより低くて内容が完全な情報が不可欠です。弊社のAWS-DevOps-Engineer-Professionalテストサンプル問題問題集は他のサイトに比べて、試験の範囲をカバーすることはより広くて、合理的な価格があります。しかしも、品質はもっと高くて一度AWS-DevOps-Engineer-Professionalテストサンプル問題試験に合格したい客様に対して、我が社のAWS-DevOps-Engineer-Professionalテストサンプル問題はあなたの最高選択かつ成功のショートカットであると思われます。

我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。NewValidDumps AmazonのAWS-DevOps-Engineer-Professionalテストサンプル問題試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。

AWS-DevOps-Engineer-Professional PDF DEMO:

QUESTION NO: 1
A DevOps Engineer is using AWS CodeDeploy across a fleet of Amazon EC2 instances in an
EC2 Auto Scaling group. The associated CodeDeploy deployment group, which is integrated with EC2
Auto Scaling, is configured to perform in-place deployments with CodeDeployDefault.OneAtATime.
During an ongoing new deployment, the Engineer discovers that, although the overall deployment finished successfully, two out of five instances have the previous application revision deployed. The other three instances have the newest application revision.
What is likely causing this issue?
A. A failed AfterInstall lifecycle event hook caused the CodeDeploy agent to roll back to the previous version on the affected instances.
B. EC2 Auto Scaling launched two new instances while the new deployment had not yet finished, causing the previous version to be deployed on the affected instances.
C. The CodeDeploy agent was not installed in two affected instances.
D. The two affected instances failed to fetch the new deployment.
Answer: B

QUESTION NO: 2
Am Amazon EC2 instance with no internet access is running in a Virtual Private Cloud (VPC) and needs to download an object from a restricted Amazon S3 bucket. When the DevOps Engineer tries to gain access to the object, an Access Denied error is received.
What are the possible causes for this error? (Select THREE.)
A. There is an error in the S3 bucket policy.
B. S3 versioning is enabled.
C. The object has been moved to Amazon Glacier.
D. There is an error in the VPC endpoint policy.
E. The S3 bucket default encryption is enabled.
F. There is an error in the IAM role configuration.
Answer: A,D,F

QUESTION NO: 3
A DevOps Engineer administers an application that manages video files for a video production company. The application runs on Amazon EC2 instances behind an ELB Application Load Balancer.
The instances run in an Auto Scaling group across multiple Availability Zones. Data is stored in an
Amazon RDS PostgreSQL Multi-AZ DB instance, and the video files are stored in an Amazon S3 bucket.
On a typical day, 50 GB of new video are added to the S3 bucket. The Engineer must implement a multi-region disaster recovery plan with the least data loss and the lowest recovery times. The current application infrastructure is already described using AWS CloudFormation.
Which deployment option should the Engineer choose to meet the uptime and recovery objectives for the system?
A. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create a scheduled task to take daily Amazon RDS cross- region snapshots to the second region. In the second region, enable cross-region replication between the original S3 bucket and Amazon Glacier. In a disaster, launch a new application stack in the second region and restore the database from the most recent snapshot.
B. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database and copy the snapshot to the second region. Create an AWS Lambda function that copies each object to a new S3 bucket in the second region in response to S3 event notifications. In the second region, launch the application from the CloudFormation template and restore the database from the most recent snapshot.
C. Launch the application from the CloudFormation template in the second region, which sets the capacity of the Auto Scaling group to 1. Create an Amazon RDS read replica in the second region. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, promote the read replica as master. Update the CloudFormation stack and increase the capacity of the Auto Scaling group.
D. Launch the application from the CloudFormation template in the second region which sets the capacity of the Auto Scaling group to 1. Use Amazon CloudWatch Events to schedule a nightly task to take a snapshot of the database, copy the snapshot to the second region, and replace the DB instance in the second region from the snapshot. In the second region, enable cross-region replication between the original S3 bucket and a new S3 bucket. To fail over, increase the capacity of the Auto Scaling group.
Answer: D

QUESTION NO: 4
A DevOps Engineer must create a Linux AMI in an automated fashion. The newly created AMI identification must be stored in a location where other build pipelines can access the new identification programmatically What is the MOST cost-effective way to do this?
A. Build a pipeline in AWS CodePipeline to download and save the latest operating system Open
Virtualization Format (OVF) image to an Amazon S3 bucket, then customize the image using the guestfish utility. Use the virtual machine (VM) import command to convert the OVF to an AMI, and store the AMI identification output as an AWS Systems Manager parameter.
B. Create an AWS Systems Manager automation document with values instructing how the image should be created. Then build a pipeline in AWS CodePipeline to execute the automation document to build the AMI when triggered. Store the AMI identification output as a Systems Manager parameter.
C. Launch an Amazon EC2 instance and install Packer. Then configure a Packer build with values defining how the image should be created. Build a Jenkins pipeline to invoke the Packer build when triggered to build an AMI. Store the AMI identification output in an Amazon DynamoDB table.
D. Build a pipeline in AWS CodePipeline to take a snapshot of an Amazon EC2 instance running the latest version of the application. Then start a new EC2 instance from the snapshot and update the running instance using an AWS Lambda function. Take a snapshot of the updated instance, then convert it to an AMI. Store the AMI identification output in an Amazon DynamoDB table.
Answer: C

QUESTION NO: 5
A company is migrating an application to AWS that runs on a single Amazon EC2 instance.
Because of licensing limitations, the application does not support horizontal scaling. The application will be using Amazon Aurora for its database.
How can the DevOps Engineer architect automated healing to automatically recover from EC2 and
Aurora failures, in addition to recovering across Availability Zones (AZs), in the MOST cost-effective manner?
A. Create an EC2 instance and enable instance recovery. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance if the primary database instance fails.
B. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to start a new EC2 instance in an available AZ when the instance status reaches a failure state. Create an Aurora database with a read replica in a second AZ, and promote it to a primary database instance when the primary database instance fails.
C. Create an EC2 Auto Scaling group with a minimum and maximum instance count of 1, and have it span across AZs. Use a single-node Aurora instance.
D. Assign an Elastic IP address on the instance. Create a second EC2 instance in a second AZ. Create an Amazon CloudWatch Events rule to trigger an AWS Lambda function to move the Elastic IP address to the second instance when the first instance fails. Use a single-node Aurora instance.
Answer: B

また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確のUiPath UiPath-ABAv1試験問題集を開発するのに準備します。 CIPS L3M1 - ためらわずに速くあなたのショッピングカートに入れてください。 あなたは弊社の商品を使用した後、一回でAmazon　Salesforce JavaScript-Developer-I-JPN試験に合格できなかったら、弊社は全額返金することを承諾します。 NewValidDumpsのAmazonのSalesforce Salesforce-Contact-Center試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。 あなたのAmazon　Oracle 1z1-071-JPN試験に合格するのは我々が与えるサプライズです。

Updated: May 28, 2022