IT技術人員にとって、両親にあなたの仕事などの問題を危ぶんでいきませんか？高い月給がある仕事に従事したいですか？美しい未来を有したいですか？だから、我々NewValidDumpsのAWS-DevOpsテスト対策書問題集をご覧になってください。ここでは、あなたは一番質高い資料と行き届いたサービスを楽しみしています。あなたはNewValidDumpsのAmazon　AWS-DevOpsテスト対策書問題集を手に入れる前に、問題集の試用版を無料に使用できます。 我々の誠意を信じてください。あなたが順調に試験に合格するように。 もし無事にAWS-DevOpsテスト対策書試験に合格したら、あなたはもっと自信になって、更なる勇気でやりたいことをしています。

AWS Certified DevOps Engineer AWS-DevOps 弊社はあなた１００％合格率を保証いたします。

AWS Certified DevOps Engineer AWS-DevOpsテスト対策書 - AWS Certified DevOps Engineer - Professional (DOP-C01) NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。 NewValidDumpsはAmazonのAWS-DevOps 更新版認定試験「AWS Certified DevOps Engineer - Professional (DOP-C01)」に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。

あなたはインターネットでAmazonのAWS-DevOpsテスト対策書認証試験の練習問題と解答の試用版を無料でダウンロードしてください。そうしたらあなたはNewValidDumpsが用意した問題集にもっと自信があります。早くNewValidDumpsの問題集を君の手に入れましょう。

Amazon AWS-DevOpsテスト対策書 - NewValidDumpsの問題集は最大のお得だね！

NewValidDumpsにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってAmazon AWS-DevOpsテスト対策書認証試験に参加する方に対して問題集を研究続けています。君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

きっと試験に合格しますよ。あなたはまだ何を待っているのですか。

AWS-DevOps PDF DEMO:

QUESTION NO: 1
A company has developed an AWS Lambda function that handles orders received through an
API. The company is using AWS CodeDeploy to deploy the Lambda function as the final stage of a
CI/CD pipeline. A DevOps Engineer has notices there are intermittent failures of the ordering API for a few seconds after deployment. After some investigation, the DevOps Engineer believes the failures are due to database changes the CloudFormation stack for the application lambda function begins executing. How should the DevOps Engineer overcome this?
A. Add a BeforeAllowTraffic hook to the AppSpec file that tests and waits for any necessary database changes before traffic can flow to the new version of the Lambda function
B. Add an AfterAllowTraffic hook to the AppSpec file that forces traffic to wait for any pending database changes before allowing the new version of the Lambda function to respond
C. Add a ValidateService hook to the AppSpec file that inspects incoming traffic and rejects the payload if dependent services such as the database are not yet ready
D. Add a BeforeInstall hook to the AppSpec file that tests and waits for any necessary database changes before deploying the new version of the Lambda function
Answer: B

QUESTION NO: 2
A Security team is concerned that a Developer can unintentionally attach an Elastic IP address to an Amazon EC2 instance in production. No Developer should be allowed to attach an Elastic IP address to an instance.
The Security team must be notified if any production server has an Elastic IP address at any time.
How can this task be automated?
A. Ensure that all IAM groups are associated with Developers do not have associate-address permissions.
Create a scheduled AWS Lambda function to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team if an instance has an Elastic IP address associated with it.
B. Create an AWS Config rule to check that all production instances have the EC2 IAM roles that include deny associate-address permissions. Verify whether there is an Elastic IP address associated with any instance, and alert the Security team if an instance has an Elastic IP address associated with it.
C. Use Amazon Athena to query AWS CloudTrail logs to check for any associate-address attempts.
Create an AWS Lambda function to dissociate the Elastic IP address from the instance, and alert the
Security team.
D. Attach an IAM policy to the Developer's IAM group to deny associate-address permissions. Create a custom AWS Config rule to check whether an Elastic IP address is associated with any instance tagged as production, and alert the Security team.
Answer: D

QUESTION NO: 3
A company has an application that has predictable peak traffic times. The company wants the application instances to scale up only during the peak times. The application stores state in Amazon
DynamoDB. The application environment uses a standard Node.js application stack and custom Chef recipes stored in a private Git repository.
Which solution is MOST cost-effective and requires the LEAST amount of management overhead when performing rolling updates of the application environment?
A. Configure AWS OpsWorks stacks and push the custom recipes to an Amazon S3 bucket and configure custom recipes to point to the S3 bucket. Then add an application layer type for a standard
Node.js application server and configure the custom recipe to deploy the application in the deploy step from the S3 bucket. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB
B. Create a custom AMI with the Node.js environment and application stack using Chef recipes. Use the AMI in an Auto Scaling group and set up scheduled scaling for the required times, then set up an
Amazon EC2 IAM role that provides permission to access DynamoDB.
C. Create a Docker file that uses the Chef recipes for the application environment based on an official
Node.js Docker image. Create an Amazon ECS cluster and a service for the application environment, then create a task based on this Docker image. Use scheduled scaling to scale the containers at the appropriate times and attach a task-level IAM role that provides permission to access DynamoD
D. Configure AWS OpsWorks stacks and use custom Chef cookbooks. Add the Git repository information where the custom recipes are stored, and add a layer in OpsWorks for the Node.js application server.
Then configure the custom recipe to deploy the application in the deploy step. Configure time-based instances and attach an Amazon EC2 IAM role that provides permission to access DynamoDB.
Answer: A

QUESTION NO: 4
A DevOps Engineer manages a web application that runs on Amazon EC2 instances behind an
Application Load Balancer (ALB). The instances run in an EC2 Auto Scaling group across multiple
Availability Zones.
The Engineer needs to implement a deployment strategy that:
Launches a second fleet of instances with the same capacity as the original fleet.
Maintains the original fleet unchanged while the second fleet is launched.
Transitions traffic to the second fleet when the second fleet is fully deployed.
Terminates the original fleet automatically 1 hour after transition.
Which solution will satisfy these requirements?
A. Use AWS Elastic Beanstalk with the configuration set to Immutable. Create an .ebextension using the Resources key that sets the deletion policy of the ALB to 1 hour, and deploy the application.
B. Use an AWS CloudFormation template with a retention policy for the ALB set to 1 hour. Update the Amazon Route 53 record to reflect the new ALB.
C. Use AWS CodeDeploy with a deployment group configured with a blue/green deployment configuration. Select the option Terminate the original instances in the deployment group with a waiting period of 1 hour.
D. Use two AWS Elastic Beanstalk environments to perform a blue/green deployment from the original environment to the new one. Create an application version lifecycle policy to terminate the original environment in 1 hour.
Answer: D

QUESTION NO: 5
An Application team is refactoring one of its internal tools to run in AWS instead of on- premises hardware.
All of the code is currently written in Python and is standalone. There is also no external state store or relational database to be queried.
Which deployment pipeline incurs the LEAST amount of changes between development and production?
A. Developers should use their native Python environment. When Dependencies are changed and a new container is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use AWS CloudFormation with the custom container to deploy the new Amazon ECS.
B. Developers should use Docker for local development. Use AWS SMS to import these containers as
AMIs for Amazon EC2 whenever dependencies are updated. Use AWS CodePipeline to test new code changes against the Auto Scaling group.
C. Developers should use their native Python environment. When Dependencies are changed and a new code is ready, use AWS CodePipeline and AWS CodeBuild to perform functional tests and then upload the new container to the Amazon ECR. Use CodePipeline and CodeBuild with the custom container to test new code changes inside AWS Elastic Beanstalk
Answer: B

NewValidDumps のAmazonのIBM C1000-138問題集はシラバスに従って、それにIBM C1000-138認定試験の実際に従って、あなたがもっとも短い時間で最高かつ最新の情報をもらえるように、弊社はトレーニング資料を常にアップグレードしています。 NewValidDumpsのAmazonのHP HP2-I65勉強資料は問題と解答を含めています。 AmazonのMicrosoft DP-300J試験トレーニングソースを提供するサイトがたくさんありますが、NewValidDumpsは最実用な資料を提供します。 NewValidDumpsのAmazonのSASInstitute A00-215試験トレーニング資料はあなたに最も適用して、あなたのニーズを満たす資料です。 Juniper JN0-664 - 試験の目標が変わる限り、あるいは我々の勉強資料が変わる限り、すぐに更新して差し上げます。

Updated: May 28, 2022