EMCのDCPPE-200資格取得認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でEMCのDCPPE-200資格取得認定試験の信頼できるソースが必要です。NewValidDumpsはとても良い選択で、DCPPE-200資格取得の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。 それと比べるものがありません。専門的な団体と正確性の高いEMCのDCPPE-200資格取得問題集があるこそ、NewValidDumpsのサイトは世界的でDCPPE-200資格取得試験トレーニングによっての試験合格率が一番高いです。 IT認証は同業種の欠くことができないものになりました。

EMC Certification DCPPE-200 我々NewValidDumpsにあなたを助けさせてください。

あなたを試験に一発合格させる素晴らしいDCPPE-200 - Dell PowerEdge Professional Exam資格取得試験に関連する参考書が登場しますよ。 数年以来IT認証試験のためのソフトを開発している我々NewValidDumpsチームは国際的に大好評を博しています。我々はEMCのDCPPE-200 日本語認定のような重要な試験を準備しているあなたに一番全面的で有効なヘルプを提供します。

もし不合格になったら、私たちは全額返金することを保証します。一回だけでEMCのDCPPE-200資格取得試験に合格したい？NewValidDumpsは君の欲求を満たすために存在するのです。NewValidDumpsは君にとってベストな選択になります。

EMC DCPPE-200資格取得 - 弊社の商品が好きなのは弊社のたのしいです。

あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた１００％合格率を保証いたします。

NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。

DCPPE-200 PDF DEMO:

QUESTION NO: 1
An engineer has a blade chassis (VRTX) and is having connectivity issues.
The chassis has blades in SLOTS 1 and 2. A switch is installed in the chassis.
- Port channel 1 is for Server 1 interfaces
- Port channel 2 is for Server 2 interfaces
- Server interfaces are members of VLANs 10, 50, and 100
- External interfaces are in a port channel
- External interfaces are configured to pass traffic on VLAN 10, 50, and 100 Configuration info from
Server interfaces and port channels:
Server Ports:
Switchport: enable
Administrative Mode: trunk
Operational Mode: up
Access Mode VLAN: 1
Port Channels 1 and 2:
Switchport: enable
Administrative Mode: access
Operational Mode: up
Access Mode VLAN: 1
Servers can NOT communicate with the network outside of the switch. Other systems can NOT communicate with the servers inside the chassis. The two servers can communicate with each other.
What does the engineer need to do to establish server communication?
A. Add untagged VLANs 10, 50, and 100 to port channel 1 and 2
B. Change port channel 1 and 2 to switchport mode trunk
C. Add untagged VLANs 10, 50, and 100 to server ports
D. Change server ports to switchport mode access.
Answer: A

QUESTION NO: 2
An administrator is configuring a new MXL I/O Aggregator (IOA) in a chassis. The new switch will connect to two top of rack (ToR) switches. The ToR switches are connected directly to the core.
The ToR and core switches are configured as follows:
ToR Switch 1: Rapid Spanning Tree, Bridge Priority 8192
ToR Switch 2: Rapid Spanning Tree, Bridge Priority 12288
Core Switch: Rapid Spanning Tree, Bridge Priority 0
The administrator needs to enable spanning tree and make sure they do not take over as the root bridge if the ToR switch reboots. Which command should the administrator enter in the MXL IOAs?
A. protocol spanning-tree rapid-stp no disable bridge-priority 8192
B. protocol spanning-tree rstp disable bridge-priority 0
C. protocol spanning-tree rstp no disable bridge-priority 16384
D. protocol spanning-tree rapid disable bridge-priority 8192
Answer: A

QUESTION NO: 3
An engineer installs a second Shared PERC Internal card into a VRTX and is performing post installation tasks.
The Fault Tolerant Status is NOT Healthy/Normal as expected.
What is the cause?
A. The VRTX was NOT licensed for two Shared PERC Internal cards.
B. The physical disks were removed from the chassis before initialization finished.
C. The Shared PERC cards are NOT at the same firmware level.
D. One or more nodes are still assigned virtual disks.
Answer: C

QUESTION NO: 4
A VRTX has the following physical disks:
- 8 300 GB SSDs
- 10 300 GB 15,000 rpm HDDs
An engineer needs to create two virtual disks for a file server: a system volume and a data volume.
The customer wants to maximize performance of the system volume and maximize redundancy of the data volume.
The customer also wants both virtual disks to survive one drive failure without the customer's intervention.
Which option is most appropriate to meet the requirements?
A. System: 7 SSDs in RAID 0Data: 9 HDDs in RAID 6One SSD and one HDD as dedicated hot spares for each volume
B. System: 8 SSDs in RAID 10Data: 8 HDDs in RAID 6Two HDDs as dedicated hot spares for each volume
C. System: 6 SSDs in RAID 10Data: 10 HDDs in RAID 6Two SSDs as dedicated hot spares for each volume
D. System: 7 SSDs in RAID 5Data: 9 HDDs in RAID 6One SSD and one HDD as dedicated hot spares for each volume
Answer: D

QUESTION NO: 5
An engineer needs to connect ports 49 and 53 on an MXL to a top of rack (ToR) switch in an
LACP port channel.
The ToR switch has ports 46 and 60 configured in port channel 100.
Which configuration will successfully bring up the port channel on the MXL?
A. interface Port-channel 1switchportinterface range fortyGigE 0/49, fortyGigE 0/53port-channel- protocol LACPport-channel 1 mode active
B. interface Port-channel 100channel member fortyGigE 0/49, firtyGigE 0/53switchportinterface range fortyGigE 0/49, fortyGigE 0/53port-channel 100 mode active
C. interface Port-channel 100channel member fortyGigE 0/49, fortyGigE 0/53switchportinterface range fortyGigE 0/49, fortyGigE 0/60lacp mode active
D. interface Port-channel 1switchportinterface range fortyGigE 0/46, fortyGigE 0/60port-channel- protocol LACPport-channel 1 mode active
Answer: C

NewValidDumpsはEMCのECCouncil 112-51認定試験「Dell PowerEdge Professional Exam」に向けてもっともよい問題集を研究しています。 あなたはインターネットでEMCのSAP C_CPI_2404認証試験の練習問題と解答の試用版を無料でダウンロードしてください。 Kinaxis KX3-003 - NewValidDumpsの問題集は最大のお得だね！ Microsoft MD-102 - NewValidDumpsはまた一年間に無料なサービスを更新いたします。 Huawei H13-313_V1.0 - NewValidDumpsというサイトをクッリクしたらあなたの願いを果たせます。

Updated: May 28, 2022