それはNewValidDumpsのC2150-620科目対策問題集です。気楽に試験に合格したければ、はやく試しに来てください。C2150-620科目対策認定試験に合格することは難しいようですね。 IBMのC2150-620科目対策認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生はC2150-620科目対策認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。 一回だけでIBMのC2150-620科目対策試験に合格したい？NewValidDumpsは君の欲求を満たすために存在するのです。

IBMのC2150-620科目対策試験は挑戦がある認定試験です。

うちのIBMのC2150-620 - IBM Security Network Protection (XGS) V5.3.2 System Administration科目対策試験トレーニング資料を購入する前に、NewValidDumpsのサイトで、一部分のフリーな試験問題と解答をダンロードでき、試用してみます。 それに、我々は一年間の無料更新サービスを提供します。失敗しましたら、当社は全額で返金して、あなたの利益を保障します。

我々の誠意を信じてください。あなたが順調に試験に合格するように。時間とお金の集まりより正しい方法がもっと大切です。

IBM C2150-620科目対策 - あなたもIT認証資格を取りたいですか。

世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、C2150-620科目対策問題集を学ぶ必要があります。弊社のC2150-620科目対策問題集はあなたにこのチャンスを全面的に与えられます。あなたは自分の望ましいIBM C2150-620科目対策問題集を選らんで、学びから更なる成長を求められます。心はもはや空しくなく、生活を美しくなります。

試験問題集が更新されると、NewValidDumpsは直ちにあなたのメールボックスにC2150-620科目対策問題集の最新版を送ります。あなたは試験の最新バージョンを提供することを要求することもできます。

C2150-620 PDF DEMO:

QUESTION NO: 1
Which configuration should be used to ensure that traffic flow is not interrupted when the hypervisor kernel moves traffic to a different ESXi host?
A. Route the traffic out of the VMware kernel and to a physical XGS 4100 appliance and then back to a distributed virtual switch for inter-hypervisor switching.
B. Configure the ESXi hosts portgroups to operate in promiscuous mode and assign the protection interfaces of the XGS for VMware to the ingress and egress distributed virtual switches.
C. Install the XGS for VMware virtual bypass unit, place the distributed virtual switch in promiscuous mode, and add the interface of the virtual bypass unit to the distributed virtual switch and the switch with the physical NIC.
D. Install the XGS for VMware virtual bypass unit, place the portgroups on the distributed virtual switch in promiscuous mode, and add the interfaces of the virtual bypass unit to the distributed virtual switch and the switch with the physical NIC.
Answer: B
Explanation:
The network server must be in the same network as the compute nodes. If the network server is on the VMware virtual machine, the port group to which it is connecting must have the VLAN ID option set to All (4095). The port groups to which the network server connects must be configured to accept
Promiscuous Mode. If the network server is outside vCenter (a physical machine, for example), it must be able to connect to the trunk port with the ESXI hosts.
References:
https://www.ibm.com/support/knowledgecenter/en/SST55W_4.3.0/liaca/liaca_deploy_network_co nsiderations.html

QUESTION NO: 2
A System Administrator wants to install a snapshot during the first time configuration of an
XGS appliance.
How can this be done?
A. Use the front panel USB port.
B. Use a console cable connection.
C. Use the Command Line interface over SSH.
D. Use the web-based Local Management Interface.
Answer: C
Explanation:
Log in to the Local Management Interface (LMI) of the XGS sensor and navigate to Manage System
Settings > Snapshots.
The Security Network Protection (XGS) has removed root access for appliance security. In place of root access, IBM has developed a predefined set of the module commands to allow console and SSH
CLI access. The modules available are broken up into a hierarchical structure with commands specific to each module. The prompt changes to display the module you are in and displays a list of the available commands.
Notes:
At any point, type help to display a list of the available commands.
The tab key can be used to finish commands (if you wanted to enter support, you can type su then tab key to complete support).
Example:
References: http://www-01.ibm.com/support/docview.wss?uid=swg21984900

QUESTION NO: 3
A System Administrator has deployed an XGS. The NAP policy is configured to generate a local log event for every accepted network connection, for example, the Event Log object is enabled for the default Accept NAP rule. Due to the number of network connections, the administrator is concerned that this could take up too much disk space on the XGS.
Which configuration should the Administrator change to ensure that this does not happen?
A. The Event Log object should be deleted and recreated with a new storage limit.
B. The Event Log object should be edited and the percentage of the total event storage limit used for
NAP events should be set.
C. The Event Log object should be cloned and the new object should have the percentage of the total event storage limit for all logs set.
D. the Event Log object should be cloned and the new object should only have NAP event logging enabled and the percentage of the total event storage limit used for events should be set.
Answer: B
Explanation:
By default, the maximum storage space for events is set to 2048 MB (2 GB). Events are stored in a database, which estimates the size of each event at 500 bytes, which means the database can store a maximum of 4,096,000 events.
You can distribute the maximum events among different event types. When the event count for an event type exceeds 90% of the maximum event allocation, older event data is erased and overwritten.
Note:
You can adjust the maximum size using the following tuning parameter:
Key: events.response.logdb.disklimit
Value: 2048
The default value is 2048 MB (2 GB). To increase the maximum size to 4 GB, change the value to
4096.
References: Implementation Guide for IBM Security Network Protection ('XGS for Techies') second edition, Version 2.0

QUESTION NO: 4
The System Administrator of a company has purchased IP Reputation license for a new XGS appliance. After doing the initial setup of XGS, it is registered to SiteProtector (SP) and IP Reputation license is added in SP agent/module licenses. However, Local Management Interface (LMI) still shows no IP reputation license.
What should the System Administrator do to get the appliance to utilize the license?
A. Add a network Access Policy rule using Geolocation object.
B. Access XGS using CLI and restart "License and update" service.
C. Access XGS using CLI and restart "Siteprotector communication" service.
D. Add a Network Access Policy Rule using "Range Address" object for a range of IP Addresses.
Answer: A
Explanation:
The IP Reputation module can be activated by adding the following object types to your Network
Objects list and adding them to a Network Access Policy rule :
Address > Geolocation
Application > IP Reputation Category
References: http://www-01.ibm.com/support/docview.wss?uid=swg21973893

QUESTION NO: 5
A System Administrator of a banking organization has become aware of some malicious traffic to its IBM Security Network Protection (XGS) appliance. The logs show patters of Denial of Service
(DoS) attack and a lot of encrypted packets targeted to the M.1 port of the XGS appliance coming from an internal laptop IP address.
What should the System Administrator do next?
A. Configure Management access policy to restrict access.
B. Configure Inbound SSL policy to inspect and drop such traffic.
C. Configure Management access policy to set the management port as TCP reset port.
D. Configure Network access policy and Intrusion Prevention Policy to block DoS attacks.
Answer: B

短時間でSAP C_S43_2022試験に一発合格したいなら、我々社のIBMのSAP C_S43_2022資料を参考しましょう。 Cisco 200-301-KR - 問題集に含まれているものは実際試験の問題を全部カバーすることができますから、あなたが一回で成功することを保証できます。 人によって目標が違いますが、あなたにIBM　CompTIA N10-008J試験に順調に合格できるのは我々の共同の目標です。 うちのIBMのSalesforce Salesforce-MuleSoft-Developer-II学習教材はNewValidDumpsのIT専門家たちが研究して、実践して開発されたものです。 あなたに高品質で、全面的なFortinet NSE6_FSW-7.2参考資料を提供することは私たちの責任です。

Updated: May 28, 2022