どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。ITの専門者はNetwork ApplianceのNS0-180認定試験認定試験があなたの願望を助けって実現できるのがよく分かります。NewValidDumpsはあなたの夢に実現させるサイトでございます。 Network Appliance　NS0-180認定試験資格認定を取得するのはそのような簡単なことです。NewValidDumpsは成立して以来、最も完備な体系、最も豊かな問題集、最も安全な決済手段と最も行き届いたサービスを持っています。 NewValidDumpsの専門家チームが君の需要を満たすために自分の経験と知識を利用してNetwork ApplianceのNS0-180認定試験認定試験対策模擬テスト問題集が研究しました。

NCSIE NS0-180 問題があったら気軽にお問いください、

NCSIE NS0-180認定試験 - NetApp Certified Storage Installation Engineer, Clustered Data ONTAP これは試験の準備をするために非常に効率的なツールですから。 NewValidDumpsが提供した資料は最も全面的で、しかも更新の最も速いです。NewValidDumpsはNetwork ApplianceのNS0-180 コンポーネント認定試験に対して問題集を提供しておるサイトで、現場のNetwork ApplianceのNS0-180 コンポーネント試験問題と模擬試験問題集を含みます。

気楽に試験に合格したければ、はやく試しに来てください。NS0-180認定試験認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。

Network Appliance NS0-180認定試験 - プロなIT技術専門家になりたいのですか。

世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、NS0-180認定試験問題集を学ぶ必要があります。弊社のNS0-180認定試験問題集はあなたにこのチャンスを全面的に与えられます。あなたは自分の望ましいNetwork Appliance NS0-180認定試験問題集を選らんで、学びから更なる成長を求められます。心はもはや空しくなく、生活を美しくなります。

NewValidDumpsのトレーニング資料は受験生が一番ほしい唯一なトレーニング資料です。NewValidDumpsのNetwork ApplianceのNS0-180認定試験試験トレーニング資料を手に入れたら、試験に合格することができるようになります。

NS0-180 PDF DEMO:

QUESTION NO: 1
Advanced Drive Partitioning (ADP) is available for which three NetApp systems? (Choose three.)
A. FAS80XX with SAS and SATA disks
B. FAS25XX with SSD disks
C. FAS80XX with SATA disks
D. FAS25XX with SATA disks
E. FAS80XX with SSD disks
Answer: B,D,E
Explanation:
ADP supported platforms: B, D: 2200, 2500 (Internal drives): Root Data Slice (HDD), Root Data Slice
(AFF - All Flash FAS)
E: 3200, 6200, 8000 ( 48 drives) : Root Data Slice (AFF - All Flash FAS) Example ADP configuration: FAS8040 All-Flash (36 x 800GB SSD)
Reference: NETAPP DATAONTAP 8.3 | ADP ROOT DISK-SLICE DEEP-DIVE
http://www.datacenterdan.com/blog/netapp-dataontap-83-adp-root-disk-slice-deep-dive

QUESTION NO: 2
Click the Exhibit button.
You are asked to install a new cluster with six FAS8060 nodes. While running Config Advisor, you see the messages shown in the exhibit. The customer does not want ACP cabled on their cluster.
Which two actions would allow the installation to be completed successfully? (Choose two.)
A. Advise NGS that the customer has a controller in an unsupported state.
B. Advise the customer that they must acknowledge that they are not using ACP on the installation.
C. Advise the sales team that the customer is operating without ACP and that the customer is asking you to leave it that way.
D. Advise the customer that the error will cause the controller to not operate properly and create an unsupported state.
Answer: B,C
Explanation:
After you cable the SAS connections, you have the option to cable the Alternative Control Path (ACP) connections. You should use the ACP protocol because it enables Data ONTAP to manage and control the SAS disk shelf storage subsystem

QUESTION NO: 3
A customer learns that a certain NetApp tool allows remote data collection, intelligent core file handling, and notification of down storage controllers for technical support analysis and troubleshooting.
What is the name of this tool?
A. RSA
B. HWU
C. Synergy
D. HW Assist
Answer: A
Explanation:
Remote Support Agent (RSA) is a remote diagnostics data collector that is embedded directly into the storage controller's remote management device firmware. Remote Support Agent enables a NetApp support engineer to remotely request an automated upload of log files, core files, and other diagnostic information stored in the storage controller and to remotely trigger an on-demand
AutoSupport collection. Incorrect: Not B: The Hardware Universe (HWU) application is NetApp's system configuration solution. Not C: NetApp Synergy is a complete design, deployment and documentation tool. The program enables you to build a very accurate, detailed model of a NetApp storage system. You can represent most aspects of a storage deployment including the hardware configuration and the sizing of all storage containers, including aggregates, volumes, qtrees and
LUNs.
Reference: Clustered Data ONTAP 8.2, Remote Support Agent Configuration Guide, Page 5

QUESTION NO: 4
What are two supported cluster interconnect switches for the FAS8040 nodes? (Choose two.)
A. Cisco Catalyst 2960
B. Cisco NX5596
C. NetApp CN1610
D. NetApp CN1601
Answer: B,C
Explanation:
Cisco NX5596 is a cluster interconnect switch. NetApp CN1610 is a cluster interconnect switch that can be used for FAS8040 nodes.
Incorrect:
Not A: The Cisco Catalyst 2960 is not a cluster interconnect switch. Not D: NetApp CN1601 is a cluster management switch.
Reference: Clustered Data ONTAP 8.3, Express Setup Guide for 80xx Systems

QUESTION NO: 5
You want to create a data volume on aggr0 and you receive a message with the following warning:
''Warning: You are about to create a volume on a root aggregate. This may cause severe performance or stability problems and therefore is not recommended. Do you want to proceed?''
What is the reason for this severe performance or stability problem?
A. Controller failover and storage failover are separate processes that must occur in parallel, otherwise problems will arise.
B. The performance load generated by the data volume can be very strong, so it should not be shared with vol0 on aggr0, requiring a separate aggregate for it.
C. The performance load generated by the vol0 cannot be shared with any other volume on aggr0, requiring a dedicated aggregate for it.
D. Controller failover and storage failover are separate processes that must occur at different times, otherwise problems will arise.
Answer: B
Explanation:
One possibly cause is Disk I/O contention on the data volume. The root volume in Cluster-Mode is used to store and update various tables of the replicated database. Crucial information regarding the locations of LIFs, volumes, aggregates, and different jobs required to run in the cluster are stored in these tables. If a root aggregate has very busy data volumes, the disks in the aggregate will experience higher latency. When a node is unable to update its copy of the replicated database fast enough, it will consider itself unhealthy and stop serving all the data until it can catch up. This is extremely disruptive and affects all the volumes on the node, even if the cause is related to the data volumes stored on the root aggregate only.
Reference:
Why is a warning displayed when attempting to create one or more data volumes in the root aggregate in Data ONTAP Cluster-Mode?
https://kb.netapp.com/support/index?id=3013563&page=content&locale=en_US

現在IT技術会社に通勤しているあなたは、Network ApplianceのSalesforce ADM-201試験認定を取得しましたか？Salesforce ADM-201試験認定は給料の増加とジョブのプロモーションに役立ちます。 CompTIA CV0-003 - あなたもきっとそう思うでしょう。 人によって目標が違いますが、あなたにNetwork Appliance　Cisco 200-201試験に順調に合格できるのは我々の共同の目標です。 Amazon ANS-C01 - NewValidDumpsの参考資料は時間の試練に耐えることができます。 あなたに高品質で、全面的なAAPC CPC参考資料を提供することは私たちの責任です。

Updated: May 28, 2022