JN0-346試験過去問 資格取得

我々NewValidDumpsは一番効果的な方法を探してあなたにJuniperのJN0-346試験過去問試験に合格させます。弊社のJuniperのJN0-346試験過去問ソフトを購入するのを決めるとき、我々は各方面であなたに保障を提供します。購入した前の無料の試み、購入するときのお支払いへの保障、購入した一年間の無料更新JuniperのJN0-346試験過去問試験に失敗した全額での返金…これらは我々のお客様への承諾です。 試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。偉大な事業を実現するために信心を持つ必要があります。 NewValidDumpsは多くの受験生を助けて彼らにJuniperのJN0-346試験過去問試験に合格させることができるのは我々専門的なチームがJuniperのJN0-346試験過去問試験を研究して解答を詳しく分析しますから。

JNCIS-ENT JN0-346 早速買いに行きましょう。

NewValidDumpsが提供した教材を勉強ツルとしてJuniperのJN0-346 - Enterprise Routing and Switching, Specialist (JNCIS-ENT)試験過去問認定試験に合格するのはとても簡単です。 NewValidDumpsのJuniperのJN0-346 問題数試験トレーニング資料はJuniperのJN0-346 問題数認定試験を準備するのリーダーです。NewValidDumpsの JuniperのJN0-346 問題数試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。

JuniperのJN0-346試験過去問は専門知識と情報技術の検査として認証試験で、NewValidDumpsはあなたに一日早くJuniperの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。NewValidDumpsにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。NewValidDumpsは君に対して特別の訓練を提供しています。

Juniper JN0-346試験過去問 - NewValidDumpsを選択したら、成功をとりましょう。

社会と経済の発展につれて、多くの人はIT技術を勉強します。なぜならば、IT職員にとって、JuniperのJN0-346試験過去問資格証明書があるのは肝心な指標であると言えます。自分の能力を証明するために、JN0-346試験過去問試験に合格するのは不可欠なことです。弊社のJN0-346試験過去問真題を入手して、試験に合格する可能性が大きくなります。

NewValidDumpsの勉強資料を手に入れたら、指示に従えば JN0-346試験過去問認定試験に受かることはたやすくなります。受験生の皆様にもっと多くの助けを差し上げるために、NewValidDumps のJuniperのJN0-346試験過去問トレーニング資料はインターネットであなたの緊張を解消することができます。

JN0-346 PDF DEMO:

QUESTION NO: 1
You configured a GRE tunnel that traverses a path using default MTU settings.
You want to ensure that packets are not dropped or fragmented.
In this scenario, what is the maximum packet size that would traverse the GRE tunnel?
A. 1476
B. 1500
C. 1400
D. 1524
Answer: A
Explanation: The default Ethernet MTU is 1500. There is a 24 byte GRE overhead, so there remain
1476
bytes for the data packet.
References: https://kb.juniper.net/InfoCenter/index?page=content&id=KB7848&actp=search

QUESTION NO: 2
Click the Exhibit button. A number of reports from end-users indicate that internal and external communications are intermittent and not reliable. You verified the status of the switch ports and have
determined that they are up and operational. You also noticed a very high level of link bandwidth utilization on those same ports. The current topology of the affected environment is shown in the exhibit.
What would be the cause of the reported issues?
A. A lack of port-based ACLs filtering the traffic flows.
B. A lack of a loop-prevention mechanism or protocol.
C. A malformed route-based ACL improperly filtering traffic flows.
D. A misconfigured interior gateway protocol (IGP).
Answer: B
Explanation: Enabling Spanning-Tree Protocol will mitigate loops, so if possible, enable Spanning-Tree
Protocol on the devices in the network segment where the loop is observed.

QUESTION NO: 3
Which two statements are correct regarding the root bridge election process when using STP?
(Choose two.)
A. A higher system MAC address is preferred.
B. A higher bridge priority is preferred.
C. A lower system MAC address is preferred.
D. A lower bridge priority is preferred.
Answer: C,D
Explanation: The root bridge for each spanning-tree protocol (STP) instance is determined by the bridge
ID. The bridge ID consists of a configurable bridge priority and the MAC address of the bridge. The bridge
with the lowest bridge ID is elected as the root bridge. If the bridge priorities are equal or if the bridge
priority is not configured, the bridge with the lowest MAC address is elected the root bridge.
References:https://www.juniper.net/documentation/en_US/junos15.1/topics/concept/layer-2- services-stp-
guidelines-statement-bridge-priority.html

QUESTION NO: 4
What is reviewed first in the BGP route selection process?
A. the peer with the lowest IP address
B. the route with an origin of incomplete
C. the path with no MED value
D. the next-hop resolution
Answer: D
Explanation: Understanding BGP Path Selection The algorithm for determining the active route is as follows: Etc.
References:https://www.juniper.net/documentation/en_US/junos12.3/topics/reference/general/rou ting-pto
tocols-address-representation.html

QUESTION NO: 5
Click the Exhibit button. Referring to the exhibit, which type of route is displayed?
A. static
B. generate
C. aggregate
D. martian
Answer: C
Explanation: From the exhibit we see: 109.0.0.0/8 *[Aggegate/130]

Fortinet NSE6_FSW-7.2 - 我々NewValidDumpsは一番行き届いたアフタサービスを提供します。 当面、IT業界でJuniperのSalesforce Salesforce-AI-Associate認定試験の信頼できるソースが必要です。 我々社サイトのJuniper SAP C_TADM_23-JPN問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのはSAP C_TADM_23-JPN資格認定試験の成功にとって唯一の選択です。 MuleSoft MCIA-Level-1-JPN - 皆さんは節約した時間とエネルギーを利用してもっと多くの金銭を稼ぐことができます。 あなたは無料でCisco 500-443復習教材をダウンロードしたいですか?もちろん、回答ははいです。

Updated: May 28, 2022

JN0-346試験過去問 & Juniper Enterprise Routing And Switching, Specialist (JNCIS ENT)復習過去問

PDF問題と解答

試験コード:JN0-346
試験名称:Enterprise Routing and Switching, Specialist (JNCIS-ENT)
最近更新時間:2024-06-01
問題と解答:全 65
Juniper JN0-346 対応内容

  ダウンロード


 

模擬試験

試験コード:JN0-346
試験名称:Enterprise Routing and Switching, Specialist (JNCIS-ENT)
最近更新時間:2024-06-01
問題と解答:全 65
Juniper JN0-346 ブロンズ教材

  ダウンロード


 

オンライン版

試験コード:JN0-346
試験名称:Enterprise Routing and Switching, Specialist (JNCIS-ENT)
最近更新時間:2024-06-01
問題と解答:全 65
Juniper JN0-346 テスト対策書

  ダウンロード


 

JN0-346 科目対策