NewValidDumpsは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。 暇の時間を利用して勉強します。努力すれば報われますなので、Huawei　H31-161復習過去問資格認定を取得して自分の生活状況を改善できます。 君が選んだのはNewValidDumps、成功を選択したのに等しいです。

HCIE-Carrier IP H31-161 IT職員としてのあなたは切迫感を感じましたか。

それは NewValidDumpsのH31-161 - HCIE-Carrier IP (Written)復習過去問問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。 そうすれば、あなたは自分自身で問題集の品質が良いかどうかを確かめることができます。NewValidDumpsのH31-161 日本語問題集問題集は的中率が100％に達することができます。

Huaweiの認証資格は最近ますます人気になっていますね。国際的に認可された資格として、Huaweiの認定試験を受ける人も多くなっています。その中で、H31-161復習過去問認定試験は最も重要な一つです。

Huawei H31-161復習過去問認定試験は現在で本当に人気がある試験ですね。

NewValidDumpsのHuaweiのH31-161復習過去問試験トレーニング資料はHuaweiのH31-161復習過去問認定試験を準備するのリーダーです。NewValidDumpsの HuaweiのH31-161復習過去問試験トレーニング資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。それは正確性が高くて、カバー率も広いです。あなたはNewValidDumpsの学習教材を購入した後、私たちは一年間で無料更新サービスを提供することができます。

どうやって安くて正確性の高いHuaweiのH31-161復習過去問問題集を買いますか。NewValidDumpsは最も安い値段で正確性の高いHuaweiのH31-161復習過去問問題集を提供します。

H31-161 PDF DEMO:

QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D

QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D

QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C

QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B

QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E

我々はあなたに提供するのは最新で一番全面的なHuaweiのSAP C-SAC-2402問題集で、最も安全な購入保障で、最もタイムリーなHuaweiのSAP C-SAC-2402試験のソフトウェアの更新です。 NewValidDumpsのHuaweiのSAP C_BW4H_214試験トレーニング資料は豊富な経験を持っているIT業種の専門家が長年の研究を通じて、作成したものです。 HuaweiのPRINCE2 PRINCE2Foundation試験に失敗しても、我々はあなたの経済損失を減少するために全額で返金します。 NewValidDumpsはHuaweiのCompTIA XK0-005試験トレーニング資料を提供する専門的なサイトです。 自分の能力を証明するために、Symantec 250-586試験に合格するのは不可欠なことです。

Updated: May 27, 2022