世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、350-401模擬対策問題問題集を学ぶ必要があります。弊社の350-401模擬対策問題問題集はあなたにこのチャンスを全面的に与えられます。 試験問題集が更新されると、NewValidDumpsは直ちにあなたのメールボックスに350-401模擬対策問題問題集の最新版を送ります。あなたは試験の最新バージョンを提供することを要求することもできます。 また、350-401模擬対策問題問題集に疑問があると、メールで問い合わせてください。

CCNP Enterprise 350-401 弊社の商品が好きなのは弊社のたのしいです。

CCNP Enterprise 350-401模擬対策問題 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) もし試験に不合格になる場合があれば、私たちが全額返金することを保証いたします。 NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。

おそらくあなたはお金がかかって買ったソフトが役に立たないのを心配しています。我々NewValidDumpsのあなたに開発するCiscoの350-401模擬対策問題ソフトはあなたの問題を解決することができます。最初の保障はあなたに安心させる高い通過率で、第二の保護手段は、あなたは弊社のソフトを利用してCiscoの350-401模擬対策問題試験に合格しないなら、我々はあなたのすべての支払を払い戻します。

CiscoのCisco 350-401模擬対策問題試験は国際的に認可られます。

NewValidDumps のCiscoの350-401模擬対策問題問題集はシラバスに従って、それに350-401模擬対策問題認定試験の実際に従って、あなたがもっとも短い時間で最高かつ最新の情報をもらえるように、弊社はトレーニング資料を常にアップグレードしています。弊社の350-401模擬対策問題のトレーニング資料を買ったら、一年間の無料更新サービスを差し上げます。もっと長い時間をもらって試験を準備したいのなら、あなたがいつでもサブスクリプションの期間を伸びることができます。

弊社のCiscoの350-401模擬対策問題練習問題の通過率は他のサイトに比較して高いです。あなたは我が社の350-401模擬対策問題練習問題を勉強して、試験に合格する可能性は大きくなります。

350-401 PDF DEMO:

QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

認証専門家や技術者及び全面的な言語天才がずっと最新のCiscoのAvaya 71801X試験を研究していますから、CiscoのAvaya 71801X認定試験に受かりたかったら、NewValidDumpsのサイトをクッリクしてください。 SAP C_BW4H_214 - 顧客の利益を保証するために、税金は弊社の方で支払います。 NewValidDumpsのCiscoのHuawei H23-211_V1.0試験トレーニング資料を手に入れたら、我々は一年間の無料更新サービスを提供します。 この問題に心配する必要がありませんし、我々社の無料に提供するCisco　Salesforce Marketing-Cloud-Advanced-Cross-ChannelPDF版を直接にダウンロードし、事前に体験できます。 Scrum PSPO-I - NewValidDumpsを選んだら、成功への扉を開きます。

Updated: May 28, 2022