この競争が激しい社会では、NewValidDumpsはたくさんの受験生の大好評を博するのは我々はいつも受験生の立場で試験ソフトを開発するからです。例えば、我々のよく発売されているCiscoの350-401専門試験試験ソフトは大量の試験問題への研究によって作れることです。試験に失敗したら全額で返金するという承諾があるとは言え、弊社の商品を利用したほとんどの受験生は試験に合格しました。 IT認定試験の中でどんな試験を受けても、NewValidDumpsの350-401専門試験試験参考資料はあなたに大きなヘルプを与えることができます。それは NewValidDumpsの350-401専門試験問題集には実際の試験に出題される可能性がある問題をすべて含んでいて、しかもあなたをよりよく問題を理解させるように詳しい解析を与えますから。 あなたの利用するCiscoの350-401専門試験試験のソフトが最も権威的なのを保障するために、我々NewValidDumpsの専門家たちはCiscoの350-401専門試験試験の問題を研究して一番合理的な解答を整理します。

その中で、350-401専門試験認定試験は最も重要な一つです。

我々は多くの受験生にCiscoの350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)専門試験試験に合格させたことに自慢したことがないのです。 NewValidDumpsのCiscoの350-401 勉強の資料試験トレーニング資料を使ったら、君のCiscoの350-401 勉強の資料認定試験に合格するという夢が叶えます。なぜなら、それはCiscoの350-401 勉強の資料認定試験に関する必要なものを含まれるからです。

我が社のNewValidDumpsはいつまでもお客様の需要を重点に置いて、他のサイトに比べより完備のCisco試験資料を提供し、Cisco試験に参加する人々の通過率を保障できます。お客様に高質の350-401専門試験練習問題を入手させるには、我々は常に真題の質を改善し足り、最新の試験に応じて真題をアープデートしたいしています。我々350-401専門試験試験真題を暗記すれば、あなたはこの試験にパースすることができます。

Cisco 350-401専門試験 - それは正確性が高くて、カバー率も広いです。

現在IT技術会社に通勤しているあなたは、Ciscoの350-401専門試験試験認定を取得しましたか？350-401専門試験試験認定は給料の増加とジョブのプロモーションに役立ちます。短時間で350-401専門試験試験に一発合格したいなら、我々社のCiscoの350-401専門試験資料を参考しましょう。また、350-401専門試験問題集に疑問があると、メールで問い合わせてください。

もちろん、我々はあなたに一番安心させるのは我々の開発する多くの受験生に合格させるCiscoの350-401専門試験試験のソフトウェアです。我々はあなたに提供するのは最新で一番全面的なCiscoの350-401専門試験問題集で、最も安全な購入保障で、最もタイムリーなCiscoの350-401専門試験試験のソフトウェアの更新です。

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Microsoft AZ-500試験備考資料の整理を悩んでいますか。 CiscoのSnowflake ARA-R01の購入の前にあなたの無料の試しから、購入の後での一年間の無料更新まで我々はあなたのCiscoのSnowflake ARA-R01試験に一番信頼できるヘルプを提供します。 NewValidDumpsは数年にわたりCisco　NetSuite SuiteFoundation資格認定試験の研究に取り組んで、量豊かな問題庫があるし、豊富な経験を持ってあなたが認定試験に効率的に合格するのを助けます。 Netskope NSK101 - 社会と経済の発展につれて、多くの人はIT技術を勉強します。 Lpi 050-100資料を勉強するとき、何か質問がありましたら、弊社と連絡できます。

Updated: May 28, 2022