IT技術人員にとって、両親にあなたの仕事などの問題を危ぶんでいきませんか？高い月給がある仕事に従事したいですか？美しい未来を有したいですか？だから、我々NewValidDumpsの300-101最速合格問題集をご覧になってください。ここでは、あなたは一番質高い資料と行き届いたサービスを楽しみしています。あなたはNewValidDumpsのCisco　300-101最速合格問題集を手に入れる前に、問題集の試用版を無料に使用できます。 我々の目的はあなたにCiscoの300-101最速合格試験に合格することだけです。試験に失敗したら、弊社は全額で返金します。 人生はさまざまな試しがある、人生の頂点にかからないけど、刺激のない生活に変化をもたらします。

CCNP 300-101 心はもはや空しくなく、生活を美しくなります。

300-101 - Implementing Cisco IP Routing最速合格問題集は、あなたに異なるシステムバージョンを提供します。 また、300-101 テスト資料問題集に疑問があると、メールで問い合わせてください。現在IT技術会社に通勤しているあなたは、Ciscoの300-101 テスト資料試験認定を取得しましたか？300-101 テスト資料試験認定は給料の増加とジョブのプロモーションに役立ちます。

だから、Cisco　300-101最速合格試験参考書を早く購入しましょう！多くの受験者にとって、300-101最速合格試験資格証明書を取得することは簡単ではないです。300-101最速合格試験に合格するには、たくさん時間と精力が必要です。

Cisco 300-101最速合格 - 弊社の商品が好きなのは弊社のたのしいです。

あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供された認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた１００％合格率を保証いたします。

NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。

300-101 PDF DEMO:

QUESTION NO: 1
Which interface type does a PPPoE client use to establish a session?
A. Physical
B. Loopback
C. Virtual-template
D. Dialer
Answer: D
Explanation
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/bbdsl/configuration/xe-3s/bba-pppoe- client.html

QUESTION NO: 2
JS Industries has expanded their business with the addition of their first remote office. The remote office router (R3) was previously configured and all Corporate subnets were reachable from
R3. JS Industries is interested in using route summarization along with the EIGRP Stub Routing feature to increase network stability while reducing the memory usage and bandwidth utilization to R3.
Another network professional was tasked with implementing this solution. However, in the process of configuring EIGRP stub routing connectivity with the remote network devices off of R3 has been lost.
Currently EIGRP is configured on all routers R2, R3, and R4 in the network. Your task is to identify and resolve the cause of connectivity failure with the remote office router R3. Once the issue has been resolved you should complete the task by configuring route summarization only to the remote office router R3.
You have corrected the fault when pings from R2 to the R3 LAN interface are successful, and the R3 IP routing table only contains 2 10.0.0.0 subnets.
Answer:
See the Explanation below.
Explanation
First we have to figure out why R3 and R4 can not communicate with each other. Use the show running-config command on router R3.
[eigrp10.jpg]
Notice that R3 is configured as a stub receive-only router. The receive-only keyword will restrict the router from sharing any of its routes with any other router in that EIGRP autonomous system. This keyword will also prevent any type of route from being sent. Therefore we will remove this command and replace it with the eigrp stub command:
R3# configure terminal R3(config)# router eigrp 123 R3(config-router)# no eigrp stub receive-only
R3(config-router)# eigrp stub R3(config-router)# end Now R3 will send updates containing its connected and summary routes to other routers. Notice that the eigrp stub command equals to the eigrp stub connected summary because the connected and summary options are enabled by default.
Next we will configure router R3 so that it has only 2 subnets of 10.0.0.0 network. Use the show ip route command on R3 to view its routing table:
[ee1%255B5%255D.jpg]
Because we want the routing table of R3 only have 2 subnets so we have to summary sub-networks at the interface which is connected with R3, the s0/0 interface of R4.
There is one interesting thing about the output of the show ip route shown above: the 10.2.3.0/24, which is a directly connected network of R3. We can't get rid of it in the routing table no matter what technique we use to summary the networks. Therefore, to make the routing table of R3 has only 2 subnets we have to summary other subnets into one subnet.
In the output if we don't see the summary line (like 10.0.0.0/8 is a summary...) then we should use the command ip summary-address eigrp 123 10.2.0.0 255.255.0.0 so that all the ping can work well.
In conclusion, we will use the ip summary-address eigrp 123 10.2.0.0 255.255.0.0 at the interface s0/0 of R4 to summary.
R4> enable R4# conf t
R4(config)# interface s0/0 R4(config-if)# ip summary-address eigrp 123 10.2.0.0 255.255.0.0 Now we jump back to R3 and use the show ip route command to verify the effect, the output is shown below:
[ee2%255B5%255D.jpg]
Note: Please notice that the IP addresses and the subnet masks in your real exam might be different so you might use different ones to solve this question.
Just for your information, notice that if you use another network than 10.0.0.0/8 to summary, for example, if you use the command ip summary-address eigrp 123 10.2.0.0 255.255.0.0 you will leave a
/16 network in the output of the show ip route command.
[ee3%255B5%255D.jpg]
But in your real exam, if you don't see the line "10.0.0.0/8 is a summary, Null0" then you can summarize using the network 10.2.0.0/16. This summarization is better because all the pings can work well.
Finally don't forget to use the copy run start command on routers R3 and R4 to save the configurations.
R3(config-if)# end
R3# copy run start
R4(config-if)# end
R4# copy run start
If the "copy run start" command doesn't work then use "write memory".

QUESTION NO: 3
Which two types of threshold are configured for tracking objects? (Choose two.)
A. Percentage
B. Delay
C. Bandwidth
D. Administrative distance
E. Weight
Answer: A,E

QUESTION NO: 4
The OSPF database of a router shows LSA types 1.2,7, and a type 3 default route only. Which type of area is this router connected to?
A. NSSA
B. NSSA totally stub
C. tub area
D. totally stubby area
Answer: A

QUESTION NO: 5
Which condition prevents the establishment of a DMPVN tunnel between two spokes?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. The two spokes are behind different PAT devices
D. The two spokes have different tunnel keepalive settings
Answer: D

Microsoft DP-300J - NewValidDumpsが提供した資料は最も全面的で、しかも更新の最も速いです。 あなたはインターネットでCiscoのSAP C_TADM_23-JPN認証試験の練習問題と解答の試用版を無料でダウンロードしてください。 Huawei H20-422_V1.0 - 最新な情報を1年間に無料にアップデートしております。 SAP C-SIGDA-2403 - NewValidDumpsはまた一年間に無料なサービスを更新いたします。 Microsoft MB-220 - NewValidDumpsというサイトをクッリクしたらあなたの願いを果たせます。

Updated: May 28, 2022