NewValidDumpsの1Y0-351資格取得講座問題集は実際の1Y0-351資格取得講座認定試験と同じです。この問題集は実際試験の問題をすべて含めることができるだけでなく、問題集のソフト版は1Y0-351資格取得講座試験の雰囲気を完全にシミュレートすることもできます。NewValidDumpsの問題集を利用してから、試験を受けるときに簡単に対処し、楽に高い点数を取ることができます。 ただ、社会に入るIT卒業生たちは自分能力の不足で、1Y0-351資格取得講座試験向けの仕事を探すのを悩んでいますか？それでは、弊社のCitrixの1Y0-351資格取得講座練習問題を選んで実用能力を速く高め、自分を充実させます。その結果、自信になる自己は面接のときに、面接官のいろいろな質問を気軽に回答できて、順調に1Y0-351資格取得講座向けの会社に入ります。 うちの学習教材の内容は正確性が高くて、Citrixの1Y0-351資格取得講座認定試験に合格する率は１００パッセントになっていました。

CCP-N 1Y0-351 暇の時間を利用して勉強します。

CCP-N 1Y0-351資格取得講座 - Citrix NetScaler 10.5 Essentials and Networking 試験に失敗したら、弊社は全額で返金します。 多分、1Y0-351 対応資料テスト質問の数が伝統的な問題の数倍である。Citrix　1Y0-351 対応資料試験参考書は全ての知識を含めて、全面的です。

我々のソフトは多くの受験生にCitrixの1Y0-351資格取得講座試験に合格させました。我々の通過率はいくつ高くても、我々はあなたが試験に失敗したら全額で返金するのを保証します。これはあなたに安心で弊社の商品を購入させるためです。

Citrix 1Y0-351資格取得講座 - 我々のデモを無料でやってみよう。

きみはCitrixの1Y0-351資格取得講座認定テストに合格するためにたくさんのルートを選択肢があります。NewValidDumpsは君のために良い訓練ツールを提供し、君のCitrix認証試に高品質の参考資料を提供しいたします。あなたの全部な需要を満たすためにいつも頑張ります。

あなたに相応しい1Y0-351資格取得講座問題集を購入できさせるには、Citrixは問題集の見本を無料に提供し、あなたはダウンロードしてやることができます。あなた1Y0-351資格取得講座問題集を購入してから、一年間の無料更新サービスをていきょうします。

1Y0-351 PDF DEMO:

QUESTION NO: 1
Scenario: A NetScaler Engineer has configured a virtual server as follows:
set lb vserver web_vserver -redirectURL http://www.external.hosting.com -backupVServer maint_vserver.
The virtual server web_vserver is marked as DOWN; maint_vserver is marked as UP.
The following request is sent to the web_vserver:
GET /path/query HTTP/1.1
What would happen to this request?
A. Redirected to http://www.external.hosting.com
B. Forwarded to the backup server, ignoring the query
C. Forwarded to the backup server, preserving the query
D. Redirected to http://www.external.hosting.com/path/query
Answer: C

QUESTION NO: 2
A network engineer has enabled BGP routing.
Which two additional features should the network engineer enable for BGP routing to function?
(Choose two.)
A. Layer 2 mode
B. Layer 3 mode
C. Dynamic routing
D. MAC based forwarding
Answer: B,C

QUESTION NO: 3
A network engineer should use a HTTP-ECV monitor type to control the status of a load balanced web server resource when __________. (Choose the correct option to complete the sentence.)
A. checking for multiple HTTP response codes
B. wanting to use a customized HTTP Request
C. checking for a specific pattern in the HTTP Response body
D. checking for a specific pattern in the HTTP Response header
Answer: C

QUESTION NO: 4
Scenario: A call center has deployed Access Gateway Enterprise to provide its employees with access to work resources from home. Due to the number of available licenses, only selected employees should access the environment remotely based on their user account information.
How could the engineer configure access to meet the needs of this scenario?
A. Configure a Pre-authentication Policy.
B. Configure an Authentication Server using a search filter.
C. Configure an Authentication Policy using Client based expressions.
D. Add the selected employee accounts to the Local Authentication policy.
Answer: B
Explanation:
http://support.citrix.com/article/CTX111079
When you type log in credentials on the log in page of the NetScaler VPN and press Enter, the credentials are sent to the Active Directory for validation. If the user name and password are valid, then the Active Directory sends the user attributes to the NetScaler appliance. The memberOf attribute is one of the attributes that the Active Directory sends to the NetScaler appliance. This attribute contains the group name of which you are defined as a member in the Active Directory. If you are a member of more than one Active Directory group, then multiple memberOf attributes are sent to the NetScaler appliance.
The NetScaler appliance then parses this information to determine if the memberOf attribute matches the Search filter parameter set on the appliance. If attribute matches, then you are allowed to log in to the network.
The following are the sample attributes that the Active Directory can send to NetScaler appliance:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd
Configuring a NetScaler Appliance to Extract the Active Directory Group To configure a NetScaler appliance to extract the Active Directory group and enable clients to access the NetScaler VPN based on the Active Directory groups by using the Lightweight Directory Access Protocol (LDAP) authentication, compete the following procedure:
Determine the Active Directory Group that has access permission. To configure the NetScaler appliance for Group Extraction, you must define the group a user needs to be a member of to allow access to the network resources. Note: To determine that exact syntax, you might need to refer to the Troubleshooting Group Extraction on the NetScaler appliance section.
Determine the Search Filter syntax.
Enter the appropriate syntax in the Search Filter field of the Create Authentication Server dialog box, as shown in the following sample screenshot:
Note: Ensure that you start the value to the Search Filter filed with memberOf= and do not have any embedded spaces in the value.
To configure the LDAP authentication with Group Extractions from the command line interface of the
NetScaler appliance with the values similar to the ones in the preceding screenshot, run the following command:
add authentication ldapaction LDAP-Authentication
-serverip 10.3.4.15
-ldapBase "CN=Users,DC=citrix,DC=com"
-ldapBindDn "CN=administrator,CN=Users,DC=citrix,DC=com" -ldapBindDnPassword
..dd2604527edf70
-ldapLoginName sAMAccountName
-searchFilter "memberOf=CN=VPNAllowed,OU=support,DC=citrix,DC=com" -
groupAttrName memberOf
-subAttributeName CN
Note: Ensure that you set the subAttributeName parameter to CN. Troubleshooting Group Extraction on the NetScaler appliance To troubleshoot group extraction on the NetScaler appliance, consider the following points:
If the LDAP policy fails after configuring it for Group Extraction, it is best to create a policy that does not have the group extraction configured to ensure that LDAP is configured appropriately. You might need to use the LDAP Data Interchange Format Data Exchange (LDIFDE) utility from Microsoft that extracts the attributes from the Active Directory server to determine the exact content of the memberOf group.
You need to run this utility on the Active Directory server. The following is the syntax for the command to run the LDIFDE utility:
ldifde -f <File_Name> -s <AD_Server_Name> -d "dc=<Domain_Name>,dc=com" -p subtree -r
"(&(objectCategory=person)(objectClass=User)(givenname=*))" -l
"cn,givenName,objectclass,samAccountName,memberOf"
When you run the preceding command, a text file, with the name you specified for File_Name parameter, is created. This file contains all objects from the Active Directory.
The following is an example from a text file so created:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd

QUESTION NO: 5
A network engineer has noted that the primary node in an HA pair has been alternating as many as three times a day due to intermittent issues.
What should the engineer configure to ensure that HA failures are alerted?
A. LACP
B. SNMP
C. Route monitors
D. Failover Interface Set
Answer: B

NewValidDumpsの専門家チームがCitrixのOracle 1z0-1058-23認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。 Tableau TDA-C01 - あなたに行き届いたサービスを提供できるのは我々の幸いです。 NewValidDumpsのCitrixのHuawei H23-211_V1.0認証試験について最新な研究を完成いたしました。 Splunk SPLK-1002J - あなたの努力を無駄にするのは我々NewValidDumpsのすべきことです。 インターネットで時勢に遅れないIAPP CIPP-C勉強資料を提供するというサイトがあるかもしれませんが、NewValidDumpsはあなたに高品質かつ最新のCitrixのIAPP CIPP-Cトレーニング資料を提供するユニークなサイトです。

Updated: May 28, 2022