数年以来の整理と分析によって開発された1Y0-351模擬体験問題集は権威的で全面的です。1Y0-351模擬体験問題集を利用して試験に合格できます。この問題集の合格率は高いので、多くのお客様から1Y0-351模擬体験問題集への好評をもらいました。 NewValidDumpsだけ全面と高品質の問題集があるのではNewValidDumpsの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、NewValidDumpsに多くの受験生の歓迎されます。 NewValidDumpsは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。

CCP-N 1Y0-351 試験に失敗したら、全額で返金いたします。

CCP-N 1Y0-351模擬体験 - Citrix NetScaler 10.5 Essentials and Networking どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。 君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

NewValidDumpsの専門家チームが君の需要を満たすために自分の経験と知識を利用してCitrixの1Y0-351模擬体験認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。

Citrix 1Y0-351模擬体験 - ここには、私たちは君の需要に応じます。

NewValidDumpsの1Y0-351模擬体験問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、NewValidDumpsの1Y0-351模擬体験問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

NewValidDumpsのCitrixの1Y0-351模擬体験試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。その権威性は言うまでもありません。

1Y0-351 PDF DEMO:

QUESTION NO: 1
Scenario: A call center has deployed Access Gateway Enterprise to provide its employees with access to work resources from home. Due to the number of available licenses, only selected employees should access the environment remotely based on their user account information.
How could the engineer configure access to meet the needs of this scenario?
A. Configure a Pre-authentication Policy.
B. Configure an Authentication Server using a search filter.
C. Configure an Authentication Policy using Client based expressions.
D. Add the selected employee accounts to the Local Authentication policy.
Answer: B
Explanation:
http://support.citrix.com/article/CTX111079
When you type log in credentials on the log in page of the NetScaler VPN and press Enter, the credentials are sent to the Active Directory for validation. If the user name and password are valid, then the Active Directory sends the user attributes to the NetScaler appliance. The memberOf attribute is one of the attributes that the Active Directory sends to the NetScaler appliance. This attribute contains the group name of which you are defined as a member in the Active Directory. If you are a member of more than one Active Directory group, then multiple memberOf attributes are sent to the NetScaler appliance.
The NetScaler appliance then parses this information to determine if the memberOf attribute matches the Search filter parameter set on the appliance. If attribute matches, then you are allowed to log in to the network.
The following are the sample attributes that the Active Directory can send to NetScaler appliance:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd
Configuring a NetScaler Appliance to Extract the Active Directory Group To configure a NetScaler appliance to extract the Active Directory group and enable clients to access the NetScaler VPN based on the Active Directory groups by using the Lightweight Directory Access Protocol (LDAP) authentication, compete the following procedure:
Determine the Active Directory Group that has access permission. To configure the NetScaler appliance for Group Extraction, you must define the group a user needs to be a member of to allow access to the network resources. Note: To determine that exact syntax, you might need to refer to the Troubleshooting Group Extraction on the NetScaler appliance section.
Determine the Search Filter syntax.
Enter the appropriate syntax in the Search Filter field of the Create Authentication Server dialog box, as shown in the following sample screenshot:
Note: Ensure that you start the value to the Search Filter filed with memberOf= and do not have any embedded spaces in the value.
To configure the LDAP authentication with Group Extractions from the command line interface of the
NetScaler appliance with the values similar to the ones in the preceding screenshot, run the following command:
add authentication ldapaction LDAP-Authentication
-serverip 10.3.4.15
-ldapBase "CN=Users,DC=citrix,DC=com"
-ldapBindDn "CN=administrator,CN=Users,DC=citrix,DC=com" -ldapBindDnPassword
..dd2604527edf70
-ldapLoginName sAMAccountName
-searchFilter "memberOf=CN=VPNAllowed,OU=support,DC=citrix,DC=com" -
groupAttrName memberOf
-subAttributeName CN
Note: Ensure that you set the subAttributeName parameter to CN. Troubleshooting Group Extraction on the NetScaler appliance To troubleshoot group extraction on the NetScaler appliance, consider the following points:
If the LDAP policy fails after configuring it for Group Extraction, it is best to create a policy that does not have the group extraction configured to ensure that LDAP is configured appropriately. You might need to use the LDAP Data Interchange Format Data Exchange (LDIFDE) utility from Microsoft that extracts the attributes from the Active Directory server to determine the exact content of the memberOf group.
You need to run this utility on the Active Directory server. The following is the syntax for the command to run the LDIFDE utility:
ldifde -f <File_Name> -s <AD_Server_Name> -d "dc=<Domain_Name>,dc=com" -p subtree -r
"(&(objectCategory=person)(objectClass=User)(givenname=*))" -l
"cn,givenName,objectclass,samAccountName,memberOf"
When you run the preceding command, a text file, with the name you specified for File_Name parameter, is created. This file contains all objects from the Active Directory.
The following is an example from a text file so created:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd

QUESTION NO: 2
Scenario: A NetScaler Engineer has configured a virtual server as follows:
set lb vserver web_vserver -redirectURL http://www.external.hosting.com -backupVServer maint_vserver.
The virtual server web_vserver is marked as DOWN; maint_vserver is marked as UP.
The following request is sent to the web_vserver:
GET /path/query HTTP/1.1
What would happen to this request?
A. Redirected to http://www.external.hosting.com
B. Forwarded to the backup server, ignoring the query
C. Forwarded to the backup server, preserving the query
D. Redirected to http://www.external.hosting.com/path/query
Answer: C

QUESTION NO: 3
Scenario: A NetScaler Engineer is using the DataStream feature. The NetScaler appliance is located in front of a MySQL Database server in the network topology.
The engineer would like to block requests that would drop a database. The engineer comes up with the expression MYSQL.REQ.QUERY.TEXT.CONTAINS("drop database").
The engineer should configure the expression with the ___________ feature to block these requests.
(Choose the correct option to complete the sentence.)
A. Responder
B. Rate Limiting
C. Content Filtering
D. Access Control List
Answer: A

QUESTION NO: 4
A network engineer has enabled BGP routing.
Which two additional features should the network engineer enable for BGP routing to function?
(Choose two.)
A. Layer 2 mode
B. Layer 3 mode
C. Dynamic routing
D. MAC based forwarding
Answer: B,C

QUESTION NO: 5
A network engineer should use a HTTP-ECV monitor type to control the status of a load balanced web server resource when __________. (Choose the correct option to complete the sentence.)
A. checking for multiple HTTP response codes
B. wanting to use a customized HTTP Request
C. checking for a specific pattern in the HTTP Response body
D. checking for a specific pattern in the HTTP Response header
Answer: C

CitrixのPMI PMP認証資格を取得すると、あなたは大きなヘルプを得ることができます。 我々の目的はあなたにCitrixのEMC D-SNC-DY-00試験に合格することだけです。 あなたはうちのCitrixのAvaya 72301X問題集を購入する前に、一部分のフリーな試験問題と解答をダンロードして、試用してみることができます。 CitrixのSalesforce Marketing-Cloud-Developer試験はいくつ難しくても文句を言わないで、我々NewValidDumpsの提供する資料を通して、あなたはCitrixのSalesforce Marketing-Cloud-Developer試験に合格することができます。 NewValidDumpsを選ぶなら、君がCitrixのMicrosoft SC-200認定試験に合格するということできっと喜んでいます。

Updated: May 28, 2022