1Y0-351最新知識 資格取得

これはCitrixの最も重要な試験の一つで、業界全体に認証された資格です。近年、IT技術の急速な発展に伴って、IT技術を勉強し始める人がますます多くなっています。そこで、IT業界で働く人も多くなっています。 世の中に去年の自分より今年の自分が優れていないのは立派な恥です。それで、IT人材として毎日自分を充実して、1Y0-351最新知識問題集を学ぶ必要があります。 最新の1Y0-351最新知識試験問題を知りたい場合、試験に合格したとしてもNewValidDumpsは無料で問題集を更新してあげます。

CCP-N 1Y0-351 早くNewValidDumpsの問題集を君の手に入れましょう。

我々NewValidDumpsが自分のソフトに自信を持つのは我々のCitrixの1Y0-351 - Citrix NetScaler 10.5 Essentials and Networking最新知識ソフトでCitrixの1Y0-351 - Citrix NetScaler 10.5 Essentials and Networking最新知識試験に参加する皆様は良い成績を取りましたから。 君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

Citrixの1Y0-351最新知識試験は国際的に認可られます。これがあったら、よい高い職位の通行証を持っているようです。NewValidDumpsの提供するCitrixの1Y0-351最新知識試験の資料とソフトは経験が豊富なITエリートに開発されて、何回も更新されています。

Citrix 1Y0-351最新知識 - この試験に受かるのは難しいですが、大丈夫です。

Citrixの1Y0-351最新知識の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。Citrixの1Y0-351最新知識の認定試験は君の実力を考察するテストでございます。

NewValidDumpsは優れたIT情報のソースを提供するサイトです。NewValidDumpsで、あなたの試験のためのテクニックと勉強資料を見つけることができます。

1Y0-351 PDF DEMO:

QUESTION NO: 1
When would it be necessary to configure Failover Interface Set (FIS) in an environment that has two NetScaler appliances in high availability (HA) mode?
A. Link redundancy is required.
B. Route monitors are required.
C. HA monitor is disabled in some interfaces.
D. The NetScaler appliances are configured on different networks.
Answer: A

QUESTION NO: 2
Scenario: A network engineer is going to roll out an upgrade from a 9.x version on a standalone
NetScaler appliance using the command-line interface.
Which two items does the engineer need to download before proceeding with the upgrade? (Choose two.)
A. SSL Certificates Files
B. NetScaler Firmware File
C. NetScaler Configuration file
D. NetScaler Documentation File
Answer: B,D

QUESTION NO: 3
Which tool could a NetScaler Engineer use to monitor client-side rendering times for a Web application that is load-balanced by NetScaler?
A. Tcpdump
B. Insight Center
C. Command Center
D. NetScaler Dashboard
Answer: A

QUESTION NO: 4
Scenario: A NetScaler Engineer is using the DataStream feature. The NetScaler appliance is located in front of a MySQL Database server in the network topology.
The engineer would like to block requests that would drop a database. The engineer comes up with the expression MYSQL.REQ.QUERY.TEXT.CONTAINS("drop database").
The engineer should configure the expression with the ___________ feature to block these requests.
(Choose the correct option to complete the sentence.)
A. Responder
B. Rate Limiting
C. Content Filtering
D. Access Control List
Answer: A

QUESTION NO: 5
Scenario: A call center has deployed Access Gateway Enterprise to provide its employees with access to work resources from home. Due to the number of available licenses, only selected employees should access the environment remotely based on their user account information.
How could the engineer configure access to meet the needs of this scenario?
A. Configure a Pre-authentication Policy.
B. Configure an Authentication Server using a search filter.
C. Configure an Authentication Policy using Client based expressions.
D. Add the selected employee accounts to the Local Authentication policy.
Answer: B
Explanation:
http://support.citrix.com/article/CTX111079
When you type log in credentials on the log in page of the NetScaler VPN and press Enter, the credentials are sent to the Active Directory for validation. If the user name and password are valid, then the Active Directory sends the user attributes to the NetScaler appliance. The memberOf attribute is one of the attributes that the Active Directory sends to the NetScaler appliance. This attribute contains the group name of which you are defined as a member in the Active Directory. If you are a member of more than one Active Directory group, then multiple memberOf attributes are sent to the NetScaler appliance.
The NetScaler appliance then parses this information to determine if the memberOf attribute matches the Search filter parameter set on the appliance. If attribute matches, then you are allowed to log in to the network.
The following are the sample attributes that the Active Directory can send to NetScaler appliance:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd
Configuring a NetScaler Appliance to Extract the Active Directory Group To configure a NetScaler appliance to extract the Active Directory group and enable clients to access the NetScaler VPN based on the Active Directory groups by using the Lightweight Directory Access Protocol (LDAP) authentication, compete the following procedure:
Determine the Active Directory Group that has access permission. To configure the NetScaler appliance for Group Extraction, you must define the group a user needs to be a member of to allow access to the network resources. Note: To determine that exact syntax, you might need to refer to the Troubleshooting Group Extraction on the NetScaler appliance section.
Determine the Search Filter syntax.
Enter the appropriate syntax in the Search Filter field of the Create Authentication Server dialog box, as shown in the following sample screenshot:
Note: Ensure that you start the value to the Search Filter filed with memberOf= and do not have any embedded spaces in the value.
To configure the LDAP authentication with Group Extractions from the command line interface of the
NetScaler appliance with the values similar to the ones in the preceding screenshot, run the following command:
add authentication ldapaction LDAP-Authentication
-serverip 10.3.4.15
-ldapBase "CN=Users,DC=citrix,DC=com"
-ldapBindDn "CN=administrator,CN=Users,DC=citrix,DC=com" -ldapBindDnPassword
..dd2604527edf70
-ldapLoginName sAMAccountName
-searchFilter "memberOf=CN=VPNAllowed,OU=support,DC=citrix,DC=com" -
groupAttrName memberOf
-subAttributeName CN
Note: Ensure that you set the subAttributeName parameter to CN. Troubleshooting Group Extraction on the NetScaler appliance To troubleshoot group extraction on the NetScaler appliance, consider the following points:
If the LDAP policy fails after configuring it for Group Extraction, it is best to create a policy that does not have the group extraction configured to ensure that LDAP is configured appropriately. You might need to use the LDAP Data Interchange Format Data Exchange (LDIFDE) utility from Microsoft that extracts the attributes from the Active Directory server to determine the exact content of the memberOf group.
You need to run this utility on the Active Directory server. The following is the syntax for the command to run the LDIFDE utility:
ldifde -f <File_Name> -s <AD_Server_Name> -d "dc=<Domain_Name>,dc=com" -p subtree -r
"(&(objectCategory=person)(objectClass=User)(givenname=*))" -l
"cn,givenName,objectclass,samAccountName,memberOf"
When you run the preceding command, a text file, with the name you specified for File_Name parameter, is created. This file contains all objects from the Active Directory.
The following is an example from a text file so created:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd

きみはCitrixのSalesforce Manufacturing-Cloud-Professional認定テストに合格するためにたくさんのルートを選択肢があります。 ECCouncil 112-51 - 確かに、この試験はとても大切な試験で、公的に認可されたものです。 NewValidDumpsの専門家チームがCitrixのSAP C_SIGPM_2403認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。 Microsoft SC-400 - なお大切なのは、自分に相応しい効率的なツールを選択することです。 NewValidDumpsのCitrixのISACA CISA-JPN認証試験について最新な研究を完成いたしました。

Updated: May 28, 2022

1Y0-351最新知識、Citrix 1Y0-351全真問題集 & Citrix NetScaler 10.5 Essentials And Networking

PDF問題と解答

試験コード:1Y0-351
試験名称:Citrix NetScaler 10.5 Essentials and Networking
最近更新時間:2024-06-08
問題と解答:全 290
Citrix 1Y0-351 復習範囲

  ダウンロード


 

模擬試験

試験コード:1Y0-351
試験名称:Citrix NetScaler 10.5 Essentials and Networking
最近更新時間:2024-06-08
問題と解答:全 290
Citrix 1Y0-351 資格難易度

  ダウンロード


 

オンライン版

試験コード:1Y0-351
試験名称:Citrix NetScaler 10.5 Essentials and Networking
最近更新時間:2024-06-08
問題と解答:全 290
Citrix 1Y0-351 対応資料

  ダウンロード


 

1Y0-351 ファンデーション