IT認証は同業種の欠くことができないものになりました。あなたはキャリアで良い昇進のチャンスを持ちたいのなら、NewValidDumpsのCitrixの1Y0-351問題例「Citrix NetScaler 10.5 Essentials and Networking」試験トレーニング資料を利用してCitrixの認証の証明書を取ることは良い方法です。現在、Citrixの1Y0-351問題例認定試験に受かりたいIT専門人員がたくさんいます。 Citrix　1Y0-351問題例資格認定はIT技術領域に従事する人に必要があります。我々社のCitrix　1Y0-351問題例試験練習問題はあなたに試験うま合格できるのを支援します。 NewValidDumpsに会ったら、最高のトレーニング資料を見つけました。

CCP-N 1Y0-351 君の初めての合格を目標にします。

NewValidDumpsのCitrixの1Y0-351 - Citrix NetScaler 10.5 Essentials and Networking問題例試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。

我々の目的はあなたにCitrixの1Y0-351問題例試験に合格することだけです。試験に失敗したら、弊社は全額で返金します。我々の誠意を信じてください。

Citrix 1Y0-351問題例 - これは受験生の皆様を助けた結果です。

あなたは1Y0-351問題例試験に不安を持っていますか？1Y0-351問題例参考資料をご覧下さい。私たちの1Y0-351問題例参考資料は十年以上にわたり、専門家が何度も練習して、作られました。あなたに高品質で、全面的な1Y0-351問題例参考資料を提供することは私たちの責任です。私たちより、1Y0-351問題例試験を知る人はいません。

Citrixの1Y0-351問題例試験に受かるのはあなたが自分をIT業種にアピールする方法の一つです。でも、試験に合格するために大量な時間とエネルギーを費やすことはなく、NewValidDumpsのCitrixの1Y0-351問題例試験トレーニング資料を選んだらいいです。

1Y0-351 PDF DEMO:

QUESTION NO: 1
Scenario: A NetScaler Engineer has configured a virtual server as follows:
set lb vserver web_vserver -redirectURL http://www.external.hosting.com -backupVServer maint_vserver.
The virtual server web_vserver is marked as DOWN; maint_vserver is marked as UP.
The following request is sent to the web_vserver:
GET /path/query HTTP/1.1
What would happen to this request?
A. Redirected to http://www.external.hosting.com
B. Forwarded to the backup server, ignoring the query
C. Forwarded to the backup server, preserving the query
D. Redirected to http://www.external.hosting.com/path/query
Answer: C

QUESTION NO: 2
A network engineer has enabled BGP routing.
Which two additional features should the network engineer enable for BGP routing to function?
(Choose two.)
A. Layer 2 mode
B. Layer 3 mode
C. Dynamic routing
D. MAC based forwarding
Answer: B,C

QUESTION NO: 3
Scenario: A call center has deployed Access Gateway Enterprise to provide its employees with access to work resources from home. Due to the number of available licenses, only selected employees should access the environment remotely based on their user account information.
How could the engineer configure access to meet the needs of this scenario?
A. Configure a Pre-authentication Policy.
B. Configure an Authentication Server using a search filter.
C. Configure an Authentication Policy using Client based expressions.
D. Add the selected employee accounts to the Local Authentication policy.
Answer: B
Explanation:
http://support.citrix.com/article/CTX111079
When you type log in credentials on the log in page of the NetScaler VPN and press Enter, the credentials are sent to the Active Directory for validation. If the user name and password are valid, then the Active Directory sends the user attributes to the NetScaler appliance. The memberOf attribute is one of the attributes that the Active Directory sends to the NetScaler appliance. This attribute contains the group name of which you are defined as a member in the Active Directory. If you are a member of more than one Active Directory group, then multiple memberOf attributes are sent to the NetScaler appliance.
The NetScaler appliance then parses this information to determine if the memberOf attribute matches the Search filter parameter set on the appliance. If attribute matches, then you are allowed to log in to the network.
The following are the sample attributes that the Active Directory can send to NetScaler appliance:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd
Configuring a NetScaler Appliance to Extract the Active Directory Group To configure a NetScaler appliance to extract the Active Directory group and enable clients to access the NetScaler VPN based on the Active Directory groups by using the Lightweight Directory Access Protocol (LDAP) authentication, compete the following procedure:
Determine the Active Directory Group that has access permission. To configure the NetScaler appliance for Group Extraction, you must define the group a user needs to be a member of to allow access to the network resources. Note: To determine that exact syntax, you might need to refer to the Troubleshooting Group Extraction on the NetScaler appliance section.
Determine the Search Filter syntax.
Enter the appropriate syntax in the Search Filter field of the Create Authentication Server dialog box, as shown in the following sample screenshot:
Note: Ensure that you start the value to the Search Filter filed with memberOf= and do not have any embedded spaces in the value.
To configure the LDAP authentication with Group Extractions from the command line interface of the
NetScaler appliance with the values similar to the ones in the preceding screenshot, run the following command:
add authentication ldapaction LDAP-Authentication
-serverip 10.3.4.15
-ldapBase "CN=Users,DC=citrix,DC=com"
-ldapBindDn "CN=administrator,CN=Users,DC=citrix,DC=com" -ldapBindDnPassword
..dd2604527edf70
-ldapLoginName sAMAccountName
-searchFilter "memberOf=CN=VPNAllowed,OU=support,DC=citrix,DC=com" -
groupAttrName memberOf
-subAttributeName CN
Note: Ensure that you set the subAttributeName parameter to CN. Troubleshooting Group Extraction on the NetScaler appliance To troubleshoot group extraction on the NetScaler appliance, consider the following points:
If the LDAP policy fails after configuring it for Group Extraction, it is best to create a policy that does not have the group extraction configured to ensure that LDAP is configured appropriately. You might need to use the LDAP Data Interchange Format Data Exchange (LDIFDE) utility from Microsoft that extracts the attributes from the Active Directory server to determine the exact content of the memberOf group.
You need to run this utility on the Active Directory server. The following is the syntax for the command to run the LDIFDE utility:
ldifde -f <File_Name> -s <AD_Server_Name> -d "dc=<Domain_Name>,dc=com" -p subtree -r
"(&(objectCategory=person)(objectClass=User)(givenname=*))" -l
"cn,givenName,objectclass,samAccountName,memberOf"
When you run the preceding command, a text file, with the name you specified for File_Name parameter, is created. This file contains all objects from the Active Directory.
The following is an example from a text file so created:
dn: CN=johnd,CN=Users,DC=citrix,DC=com
changetype: add
memberOf: CN=VPNAllowed,OU=support,DC=citrix,DC=com
cn: johnd
givenName: john
objectClass: user
sAMAccountName: johnd

QUESTION NO: 4
A network engineer should use a HTTP-ECV monitor type to control the status of a load balanced web server resource when __________. (Choose the correct option to complete the sentence.)
A. checking for multiple HTTP response codes
B. wanting to use a customized HTTP Request
C. checking for a specific pattern in the HTTP Response body
D. checking for a specific pattern in the HTTP Response header
Answer: C

QUESTION NO: 5
A network engineer has noted that the primary node in an HA pair has been alternating as many as three times a day due to intermittent issues.
What should the engineer configure to ensure that HA failures are alerted?
A. LACP
B. SNMP
C. Route monitors
D. Failover Interface Set
Answer: B

CompTIA N10-008 - 弊社の商品が好きなのは弊社のたのしいです。 CyberArk CPC-SEN - そうだったら、NewValidDumpsを利用したください。 Salesforce Marketing-Cloud-Account-Engagement-Specialist-JPN - NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。 NewValidDumpsのCitrixのSalesforce DEX-403J試験トレーニング資料はあなたの成功への第一歩です。 あなたはインターネットでCitrixのMicrosoft PL-200J認証試験の練習問題と解答の試用版を無料でダウンロードしてください。

Updated: May 28, 2022