努力すれば報われますなので、Microsoft　074-335資格難易度資格認定を取得して自分の生活状況を改善できます。IT職員のあなたは毎月毎月のあまり少ない給料を持っていますが、暇の時間でひたすら楽しむんでいいですか。Microsoft　074-335資格難易度試験認定書はIT職員野給料増加と仕事の昇進にとって、大切なものです。 時には、進める小さなステップは人生の中での大きなステップとするかもしれません。Microsoftの074-335資格難易度試験は小さな試験だけでなく、あなたの職業生涯に重要な影響を及ぼすことができます。 多分、074-335資格難易度テスト質問の数が伝統的な問題の数倍である。

Microsoft Lync Server 074-335 そして、試験を安心に参加してください。

NewValidDumpsが提供したMicrosoftの074-335 - Network Readiness and Assessment for Lync資格難易度トレーニング資料を利用したら、Microsoftの074-335 - Network Readiness and Assessment for Lync資格難易度認定試験に受かることはたやすくなります。 Microsoftの074-335 日本語的中対策試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。

NewValidDumpsのMicrosoftの074-335資格難易度試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。NewValidDumpsはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。

その中で、Microsoft 074-335資格難易度認定試験は最も重要な一つです。

最近の数年間で、IT領域の継続的な発展と成長に従って、074-335資格難易度認証試験はもうMicrosoft試験のマイルストーンになりました。Microsoftの074-335資格難易度「Network Readiness and Assessment for Lync」の認証試験はあなたがIT分野のプロフェッショナルになることにヘルプを差し上げます。Microsoftの074-335資格難易度の試験問題を提供するウェブが何百ありますが、なぜ受験生は殆どNewValidDumpsを選んだのですか。それはNewValidDumpsにはIT領域のエリートたちが組み立てられた団体があります。その団体はMicrosoftの074-335資格難易度の認証試験の最新の資料に専攻して、あなたが気楽にMicrosoftの074-335資格難易度の認証試験に合格するためにがんばっています。NewValidDumpsは初めにMicrosoftの074-335資格難易度の認証試験を受けるあなたが一回で成功することを保証します。NewValidDumpsはいつまでもあなたのそばにいて、あなたと一緒に苦楽を共にするのです。

まだ何を待っていますか。早速買いに行きましょう。

074-335 PDF DEMO:

QUESTION NO: 1
You need to recommend a solution to test instant messaging (IM) communications with the federated company. Which synthetic transaction should you configure?
A. Test-CsMcxPushNotification
B. Test-CsMCXP2PIM
C. Test-CsASConference
D. Test-CsXmppIM
Answer: D
Explanation:
Note:
Humongous Insurance is federated with Trey Research Corporation, which uses a third-party IM.
Users at both companies need to communicate with each other by using their respective IM client.
A third party IM provider will use XMPP.

QUESTION NO: 2
Your customer's network includes three offices and two data centers that are connected by wide area network (WAN) links. Your customer has documented and modeled Lync usage within the current environment.
You review the customer's model and confirm that it is accurate.
You need to recommend the next step in the Lync network readiness assessment.
What should you recommend as the next step?
A. Implement Quality of Service (QoS).
B. Perform traffic simu-lation.
C. Calculate audio capacity for a public switched telephone network (PSTN).
D. Calculate bandwidth estimations over the WAN links.
Answer: B
Explanation:
Networking Guide Network Planning, Monitoring, and Troubleshooting with Lync Server

QUESTION NO: 3
You need to configure the Lync 2013 Bandwidth Calculator to provide a visual alert when the volume of Lync traffic at Contoso exceeds the maximum allowed threshold.
What should you do?
A. For the Contoso office in Vancouver, update the value for WAN link BW allocated for RTC traffic to
5 Mbps.
B. In the global definitions, update the value of the Flag in Red parameter to 50%.
C. For the Contoso office in Seattle, update the value for WAN link BW allocated for RTC traffic to 5
Mbps.
D. In the global definitions, update the value of the Flag in Red parameter to 25%.
Answer: D
Explanation:
/ Volume of Lync traffic does not exceed 25 percent of the WAN bandwidth You need to adjust modalities to define the custom usage model for Litware Inc by using the Lync Bandwidth Calculator.

QUESTION NO: 4
You need to deploy and enable Quality of Service (QoS) on all workstations to meet the planned changes and performance goals. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Apply Service Pack 3 to all Windows XP workstations and Service Pack 2 to all Windows Vista workstations.
B. Create Group Policy objects (GPOs) for Lync audio and video and configure them to use the same port ranges and Differentiated Services Code Point (DSCP) values for QoS.
C. Create Group Policy objects (GPOs) for Lync audio and video and configure them to use different port ranges and Differentiated Services Code Point (DSCP) values for QoS.
D. Configure the Group Policy object (GPO) configuring QoS and set it to Enforced.
E. Upgrade all Windows XP and Windows Vista workstations to Windows 7 or above.
Answer: C,D,E
Explanation:
Note that Microsoft Lync Server 2013 does not support QoS for other Windows operating systems, such as Windows Vista or Windows XP.
The port ranges and DSCPs must be different for audio and video. To create a Quality of Service audio policy for Windows 7 or Windows 8 computers, first log on to a computer where Group Policy
Management has been installed. Open Group Policy Management (click Start, point to Administrative
Tools, and then click Group Policy Management) and then complete the following procedure:
- In Group Policy Management, locate the container where the new policy should be created. For example, if all your client computers are located in an OU named Clients then the new policy should be created in the Client OU.
- Right-click the appropriate container and then click Create a GPO in this domain, and Link it here. - I n the New GPO dialog box, type a name for the new Group Policy object in the Name box (for example, Lync Audio) and then click OK. - Right-click the newly-created policy and then click Edit. - I n the Group Policy Management Editor, expand Computer Configuration, expand Policies, expand
Windows Settings, right-click Policy-based QoS, and then click Create new policy.
- In the Policy-based QoS dialog box, on the opening page, type a name for the new policy (e.g., Lync
Audio) in the Name box. Select Specify DSCP Value and set the value to 46. Leave Specify Outbound
Throttle Rate unselected, and then click Next.
- On the next page, make sure that All applications is selected and then click Next. This setting instructs the network to look for all packets with a DSCP marking of 46, not just packets created by a specific application.
Etc.

QUESTION NO: 5
DRAG DROP
You prepare a response to a client's request for proposal (RFP) for a Lync network readiness assessment.
The client's network includes a main office that houses 500 employees and 30 branch offices that house 20 to 100 employees each. All sites are connected by a Multiprotocol Label Switching (MPLS) network. The client plans to use Lync video and upload and share Microsoft PowerPoint presentations.
The client wants to perform a Lync network assessment.
You need to include the required tasks in the RFP response, in the correct order.
Which four tasks should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:

あなたがMicrosoftのNetwork Appliance NS0-014「Network Readiness and Assessment for Lync」認定試験に合格する需要を我々はよく知っていますから、あなたに高品質の問題集と科学的なテストを提供して、あなたが気楽に認定試験に受かることにヘルプを提供するのは我々の約束です。 NewValidDumpsのMicrosoftのIIA IIA-CIA-Part1試験トレーニング資料はMicrosoftのIIA IIA-CIA-Part1認定試験を準備するのリーダーです。 NewValidDumpsが提供したMicrosoftのSAP C-TS4FI-2023トレーニング資料はあなたの成功への礎になれることだけでなく、あなたがIT業種でもっと有効な能力を発揮することも助けられます。 もちろん、我々はあなたに一番安心させるのは我々の開発する多くの受験生に合格させるMicrosoftのJuniper JN0-252試験のソフトウェアです。 現在、市場でオンラインのMicrosoftのASQ CMQ-OE試験トレーニング資料はたくさんありますが、NewValidDumpsのMicrosoftのASQ CMQ-OE試験トレーニング資料は絶対に最も良い資料です。

Updated: May 28, 2022