074-335日本語資格取得 資格取得

Microsoftの074-335日本語資格取得認定試験に合格するためにたくさん方法があって、非常に少ないの時間とお金を使いのは最高で、NewValidDumpsが対応性の訓練が提供いたします。 短時間で074-335日本語資格取得試験に一発合格したいなら、我々社のMicrosoftの074-335日本語資格取得資料を参考しましょう。また、074-335日本語資格取得問題集に疑問があると、メールで問い合わせてください。 NewValidDumpsが提供したMicrosoftの074-335日本語資格取得試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。

Microsoft Lync Server 074-335 しかも、一年間の無料更新サービスを提供します。

あなたは074-335 - Network Readiness and Assessment for Lync日本語資格取得試験に不安を持っていますか?074-335 - Network Readiness and Assessment for Lync日本語資格取得参考資料をご覧下さい。 074-335 試験問題解説集認定試験と言ったら、信頼できるのを無視することは難しい。NewValidDumps の074-335 試験問題解説集試験トレーニング資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。

NewValidDumpsはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。NewValidDumpsは専門のIT業界での評判が高くて、あなたがインターネットでNewValidDumpsの部分のMicrosoft 074-335日本語資格取得「Network Readiness and Assessment for Lync」資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。

Microsoft 074-335日本語資格取得 - 早くNewValidDumpsの問題集を君の手に入れましょう。

中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。NewValidDumpsのMicrosoftの074-335日本語資格取得試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くNewValidDumpsのMicrosoftの074-335日本語資格取得試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。

君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

074-335 PDF DEMO:

QUESTION NO: 1
Your company corporate telephony environment is a combination of Lync 2013 and traditional
Private Branch Exchange (PBX). The sites are connected by a Multiprotocol Label Switching (MPLS) topology. There are 750 users who are using Lync 2013 and 2,500 users who are using the PBX environment. On average, the company has 10 percent of its users in conferences. The company plans to add additional bandwidth for all sites.
The company is concerned about the number of dropped calls on the PBXs.
As part of a bandwidth upgrade process, you model real-time transport protocol (RTP) media call flows for audio communications. You have determined the average number of calls and estimated the bandwidth required for the audio portion of the calls.
You need to identify the additional bandwidth requirements when modeling real-time transport control protocol (RTCP) traffic.
Which bandwidth option should you choose?
A. 5 kilobits per second (kbps) per stream
B. 20 kilobits per second (kbps) per stream
C. 5 kilobits per second (kbps) total
D. 20 kilobits per second (kbps) total
Answer: A
Explanation:
RTCP Bandwidth Media RTCP maximum bandwidth (Kbps)
Audio 5
Video 10
An Introduction to Network Assessment Concepts: Microsoft Unified Communications

QUESTION NO: 2
HOTSPOT
You analyze the results of Lync traffic modeling for a customer's network. The relevant portion of the network topology diagram is shown in the answer area.
The estimated links workload is shown in the following table:
The customer wants to build a highly available Lync infrastructure.
You need to determine which link must be updated to support the customer's requirements.
Which link should you update? (To answer, select the appropriate link in the network topology diagram.)
Answer:

QUESTION NO: 3
You need to determine the minimum Asymmetric Digital Subscriber Line (ADSL) network service requirements for the branch locations.
Which bandwidth should you choose?
A. l Mbps/512 Kbps
B. 5 Mbps/1 Mbps
C. 5 Mbps/1.5 Mbps
D. 10 Mbps/3 Mbps
Answer: C
Explanation:
/ Branches should be able to support up to 24 simultaneous peer-to-peer (P2P) calls between sites /
Fabrikam uses RTAudio Wideband (57Kbps)
24 x 57 = 1368. For redundancy, the backup line must be at least 1368kpbs, ie: 1.5Mbps.

QUESTION NO: 4
You need to deploy and enable Quality of Service (QoS) on all workstations to meet the planned changes and performance goals. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Apply Service Pack 3 to all Windows XP workstations and Service Pack 2 to all Windows Vista workstations.
B. Create Group Policy objects (GPOs) for Lync audio and video and configure them to use the same port ranges and Differentiated Services Code Point (DSCP) values for QoS.
C. Create Group Policy objects (GPOs) for Lync audio and video and configure them to use different port ranges and Differentiated Services Code Point (DSCP) values for QoS.
D. Configure the Group Policy object (GPO) configuring QoS and set it to Enforced.
E. Upgrade all Windows XP and Windows Vista workstations to Windows 7 or above.
Answer: C,D,E
Explanation:
Note that Microsoft Lync Server 2013 does not support QoS for other Windows operating systems, such as Windows Vista or Windows XP.
The port ranges and DSCPs must be different for audio and video. To create a Quality of Service audio policy for Windows 7 or Windows 8 computers, first log on to a computer where Group Policy
Management has been installed. Open Group Policy Management (click Start, point to Administrative
Tools, and then click Group Policy Management) and then complete the following procedure:
- In Group Policy Management, locate the container where the new policy should be created. For example, if all your client computers are located in an OU named Clients then the new policy should be created in the Client OU.
- Right-click the appropriate container and then click Create a GPO in this domain, and Link it here. - I n the New GPO dialog box, type a name for the new Group Policy object in the Name box (for example, Lync Audio) and then click OK. - Right-click the newly-created policy and then click Edit. - I n the Group Policy Management Editor, expand Computer Configuration, expand Policies, expand
Windows Settings, right-click Policy-based QoS, and then click Create new policy.
- In the Policy-based QoS dialog box, on the opening page, type a name for the new policy (e.g., Lync
Audio) in the Name box. Select Specify DSCP Value and set the value to 46. Leave Specify Outbound
Throttle Rate unselected, and then click Next.
- On the next page, make sure that All applications is selected and then click Next. This setting instructs the network to look for all packets with a DSCP marking of 46, not just packets created by a specific application.
Etc.

QUESTION NO: 5
You need to configure the Lync 2013 Bandwidth Calculator to provide a visual alert when the volume of Lync traffic at Contoso exceeds the maximum allowed threshold.
What should you do?
A. For the Contoso office in Vancouver, update the value for WAN link BW allocated for RTC traffic to
5 Mbps.
B. In the global definitions, update the value of the Flag in Red parameter to 50%.
C. For the Contoso office in Seattle, update the value for WAN link BW allocated for RTC traffic to 5
Mbps.
D. In the global definitions, update the value of the Flag in Red parameter to 25%.
Answer: D
Explanation:
/ Volume of Lync traffic does not exceed 25 percent of the WAN bandwidth You need to adjust modalities to define the custom usage model for Litware Inc by using the Lync Bandwidth Calculator.

Juniper JN0-105 - しかも、昇進と高給も実現できます。 NewValidDumps のMicrosoftのMicrosoft AZ-140問題集はシラバスに従って、それにMicrosoft AZ-140認定試験の実際に従って、あなたがもっとも短い時間で最高かつ最新の情報をもらえるように、弊社はトレーニング資料を常にアップグレードしています。 しかし、調査や自分自身の試用の後、NewValidDumpsのDatabricks Databricks-Certified-Data-Engineer-Associate問題集が試験の準備ツールに最適であることはわかります。 Cisco 820-605J - あなたに成功に近づいて、夢の楽園に一歩一歩進めさせられます。 Google Google-Workspace-Administrator-JPN - 不合格になればNewValidDumpsは全額返金のことができますから、絶対損にならないです。

Updated: May 28, 2022

074-335日本語資格取得 & Microsoft Network Readiness And Assessment For Lync日本語認定

PDF問題と解答

試験コード:074-335
試験名称:Network Readiness and Assessment for Lync
最近更新時間:2024-06-16
問題と解答:全 95
Microsoft 074-335 最速合格

  ダウンロード


 

模擬試験

試験コード:074-335
試験名称:Network Readiness and Assessment for Lync
最近更新時間:2024-06-16
問題と解答:全 95
Microsoft 074-335 前提条件

  ダウンロード


 

オンライン版

試験コード:074-335
試験名称:Network Readiness and Assessment for Lync
最近更新時間:2024-06-16
問題と解答:全 95
Microsoft 074-335 関連試験

  ダウンロード


 

074-335 受験方法