あなたより優れる人は存在している理由は彼らはあなたの遊び時間を効率的に使用できることです。どのようにすばらしい人になれますか？ここで、あなたに我々のMicrosoft　070-768過去問題試験問題集をお勧めください。弊社NewValidDumpsの070-768過去問題試験問題集を介して、速く試験に合格して070-768過去問題試験資格認定書を受け入れる一方で、他の人が知らない知識を勉強して優れる人になることに近くなります。 NewValidDumpsは君にとってベストな選択になります。ここには、私たちは君の需要に応じます。 我々NewValidDumps提供する070-768過去問題問題集を通して、試験に迅速的にパースする技をファンドできます。

MCSA 070-768 我々の誠意を信じてください。

市場の巨大な練習材料から070-768 - Developing SQL Data Models過去問題の学習教材を手に入れようとする人も増えています。 自分のIT業界での発展を希望したら、Microsoftの070-768 無料試験試験に合格する必要があります。Microsoftの070-768 無料試験試験はいくつ難しくても文句を言わないで、我々NewValidDumpsの提供する資料を通して、あなたはMicrosoftの070-768 無料試験試験に合格することができます。

君はまだMicrosoft 070-768過去問題認証試験を通じての大きい難度が悩んでいますか？ 君はまだMicrosoft 070-768過去問題認証試験に合格するために寝食を忘れて頑張って復習しますか？ 早くてMicrosoft 070-768過去問題認証試験を通りたいですか？NewValidDumpsを選択しましょう！NewValidDumpsはきみのIT夢に向かって力になりますよ。

Microsoft 070-768過去問題 - 心はもはや空しくなく、生活を美しくなります。

今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。070-768過去問題認定試験はMicrosoftの中に重要な認証試験の一つですが、NewValidDumpsにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってMicrosoft 070-768過去問題「Developing SQL Data Models」認証試験に参加する方に対して問題集を研究続けています。

短時間で070-768過去問題試験に一発合格したいなら、我々社のMicrosoftの070-768過去問題資料を参考しましょう。また、070-768過去問題問題集に疑問があると、メールで問い合わせてください。

070-768 PDF DEMO:

QUESTION NO: 1
You are developing a SQL Server Analysis Services (SSAS) tabular project.
In the data warehouse, a table named Sales Persons and Territories defines a relationship between a salesperson's name, logon ID, and assigned sales territory.
You need to ensure that each salesperson has access to data from only the sales territory assigned to that salesperson. You need to use the least amount of development effort to achieve this goal.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Create a new role named Sales Persons with Read permission. Add each salesperson's logon as a member to the role.
B. Add the Sales Persons and Territories table to the model, define the relationships, and then implement dynamic security by using row filters. Grant each salesperson access to the model.
C. Create a new Active Directory Domain Services (AD DS) security group and add each salesperson as a member. Then create a new role named Sales Persons with Read permission. Add the group as a member to the new role.
D. Create a separate tabular model for each sales territory and assign each tabular model a corresponding sales territory name. Grant each salesperson access to the corresponding tabular model of the assigned sales territory.
Answer: B

QUESTION NO: 2
You are developing a SQL Server Analysis Services (SSAS) tabular project.
A column named City must be added to the table named Customer. The column will be used in the definition of a hierarchy. The City column exists in the Geography table that is related to the
Customer table.
You need to add the City column to the Customer table.
How should you write the calculation?
A. City:= LOOKUP(Geography[City],Geography[GeographyKey],[GeographyKey])
B. City:= LOOKUPVALUE(Geography[City],Geography[GeographyKey],[GeographyKey]) C
.=RELATED(Geography[City])
C. =RELATED(Geography.City)
D. =VALUES(Geography[City])
E. City:=VALUES(Geography[City])
Answer: C
Explanation: * RELATED Function
Returns a related value from another table.

QUESTION NO: 3
DRAG DROP
You install a SQL Server Analysis Services (SSAS) instance in tabular mode on a server.
While processing a very large tabular model, you receive an out-of-memory error. You identify that the amount of physical memory in the server is insufficient. Additional physical memory cannot be installed in the server.
You need to configure the server to allow paging to disk by using the operating system page file
(pagefile.sys).
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Explanation:
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* View or set configuration properties in Management Studio
*
In SQL Server Management Studio, connect to an Analysis Services instance.
In Object Explorer, right-click the Analysis Services instance, and then clickProperties.
The General page appears, displaying the more commonly used properties.
*
To view additional properties, click theShow Advanced (All) Propertiescheckbox at the bottom of the page.
Modifying server properties is supported only for tabular mode and multidimensional mode servers.
If you installed PowerPivot for SharePoint, always use the default values unless you are directed otherwise by a Microsoft product support engineer.
* VertiPaqPagingPolicy
Specifies the paging behavior in the event the server runs low on memory. Valid values are as follows:
Zero (0) is the default. No paging is allowed. If memory is insufficient, processing fails with an out-of- memory error.
1 enables paging to disk using the operating system page file (pagefile.sys).
When VertiPaqPagingPolicy is set to 1, processing is less likely to fail due to memory constraints because the server will try to page to disk using the method that you specified.
Setting the VertiPaqPagingPolicy property does not guarantee that memory errors will never happen.
Out of memory errors can still occur under the following conditions:
There is not enough memory for all dictionaries. During processing, Analysis Services locks the dictionaries for each column in memory, and all of these together cannot be more than the value specified for VertiPaqMemoryLimit.
There is insufficient virtual address space to accommodate the process.
To resolve persistent out of memory errors, you can either try to redesign the model to reduce the amount of data that needs processing, or you can add more physical memory to the computer.
Applies to tabular server mode only
* Incorrect: VertiPaqMemoryLimit
If paging to disk is allowed, this property specifies the level of memory consumption (as a percentage of total memory) at which paging starts. The default is 60. If memory consumption is less than 60 percent, the server will not page to disk.
This property depends on the VertiPaqPagingPolicyProperty, which must be set to 1 in order for paging to occur.
Applies to tabular server mode only.

QUESTION NO: 4
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server Analysis Services (SSAS) instance that is configured to use multidimensional mode. You create the following cube:
Users need to be able to analyze sales by product and color.
You need to create the dimension.
Which relationship type should you use between the InternetSales table and the new dimension?
A. no relationship
B. regular
C. fact
D. referenced
E. many-to-many
F. data mining
Answer: D
Explanation:
A reference dimension relationship between a cube dimension and a measure group exists when the key column for the dimension is joined indirectly to the fact table through a key in another dimension table, as shown in the following illustration.
A reference dimension relationship represents the relationship between dimension tables and a fact table in a snowflake schema design. When dimension tables are connected in a snowflake schema, you can define a single dimension using columns from multiple tables, or you can define separate dimensions based on the separate dimension tables and then define a link between them using the reference dimension relationship setting. The following figure shows one fact table named
InternetSales, and two dimension tables called Customer and Geography, in a snowflake schema.
You can create two dimensions related to the InternetSales measure group: a dimension based on the Customer table, and a dimension based on the Geography table. You can then relate the
Geography dimension to the InternetSales measure group using a reference dimension relationship using the Customer dimension.

QUESTION NO: 5
DRAG DROP
You need to configure the SalesAnalysis cube to correct the sales analysis by customer calculation.
Which four actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Open the cube editor, and open the Dimension Usage tab.
Step 2: Configure a relationship between the Customer dimension and the Sales measure group. Use
Day as the granularity.
From scenario: The SalesAnalysis cube contains a fact table named CoffeeSale loaded from a table named FactSale in the data warehouse.
The time granularity within the cube is 15 minutes.
The cube is processed every night at 23:00. You determine that the fact table cannot be fully processed in the expected time. Users have reported slow query response times.
Step 3: Reprocess the cube.
Step 4: Deploy the project changes.

SAP C-DS-43 - 受験者がNewValidDumpsを選択したら高度専門の試験に１００％合格することが問題にならないと保証いたします。 人によって目標が違いますが、あなたにMicrosoft　Cisco 700-826試験に順調に合格できるのは我々の共同の目標です。 NewValidDumpsはMicrosoftのSAP C_DS_43認定試験に便利なサービスを提供するサイトで、従来の試験によってNewValidDumps が今年のMicrosoftのSAP C_DS_43認定試験を予測してもっとも真実に近い問題集を研究し続けます。 あなたに高品質で、全面的なOracle 1z0-808参考資料を提供することは私たちの責任です。 MicrosoftのSalesforce Advanced-Administrator認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。

Updated: May 28, 2022