短い時間に最も小さな努力で一番効果的にMicrosoftの070-467受験料過去問試験の準備をしたいのなら、NewValidDumpsのMicrosoftの070-467受験料過去問試験トレーニング資料を利用することができます。NewValidDumpsのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。NewValidDumpsを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。 自分の幸せは自分で作るものだと思われます。ただ、社会に入るIT卒業生たちは自分能力の不足で、070-467受験料過去問試験向けの仕事を探すのを悩んでいますか？それでは、弊社のMicrosoftの070-467受験料過去問練習問題を選んで実用能力を速く高め、自分を充実させます。 このトレーニング方法は受験生の皆さんに短い時間で予期の成果を取らせます。

Microsoft SQL Server 2012 070-467 きっと君に失望させないと信じています。

Microsoft SQL Server 2012 070-467受験料過去問 - Designing Business Intelligence Solutions with Microsoft SQL Server あなたは最高の方法を探しましたから。 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。NewValidDumps Microsoftの070-467 最新日本語版参考書試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。

あなたはデモから我々のMicrosoftの070-467受験料過去問ソフトを開発する意図とプロを感じることができます。試験を怖く感じるのはかなり正常です。特にMicrosoftの070-467受験料過去問のような難しい試験です。

Microsoft 070-467受験料過去問 - 人の職業の発展は彼の能力によって進めます。

NewValidDumpsのMicrosoftの070-467受験料過去問試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。NewValidDumpsはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。

Microsoftの070-467受験料過去問資格認定証明書を持つ人は会社のリーダーからご格別のお引き立てを賜ったり、仕事の昇進をたやすくなったりしています。これなので、今から我々社NewValidDumpsの070-467受験料過去問試験に合格するのに努力していきます。

070-467 PDF DEMO:

QUESTION NO: 1
You need to configure Library1 to support the planned self-service reports.
What is the best configuration you should add to Library1? More than one answer choice may achieve the goal. Select the BEST answer.
A. The Report Builder Model content type
B. The PowerPivot Gallery Document content type
C. The Report Builder report content type
D. The Report content type
Answer: C

QUESTION NO: 2
You need to develop a BISM that meets the business requirements for ad-hoc and daily operational analysis.
You must minimize development effort.
Which development approach and mode should you use?
A. Develop a multidimensional project and configure the model with the DirectQuery mode setting off.
B. Develop a tabular project and configure the model with the DirectQuery mode setting on and the project query mode set to DirectQuery.
C. Develop a multidimensional project and configure the cube to use hybrid OLAP (HOLAP) storage mode.
D. Develop a tabular project and configure the model with the DirectQuery mode setting on and the project query mode set to In-Memory with DirectQuery.
Answer: A
Explanation
/ After the upgrade users must be able to perform the following tasks:
/ Ad-hoc analysis of data in the SSAS databases by using the Microsoft Excel PivotTable client (which uses MDX).
/ Daily operational analysis by executing a custom application that uses ADOMD.NET and existing
Multidimensional Expressions (MDX) queries.
/ Deploy a data model to allow the ad-hoc analysis of data. The data model must be cached and source data from an OData feed.
We cannot use DirectQuery mode so C is the only answer that will provide the required caching.
When a model is in DirectQuery mode, it can only be queried by using DAX. You cannot use MDX to create queries. This means that you cannot use the Excel Pivot Client, because Excel uses MDX.

QUESTION NO: 3
You are creating a Multidimensional Expressions (MDX) calculation for Projected Revenue in a cube.
For Customer A, Projected Revenue is defined as 150 percent of the Total Sales for the customer. For all other customers, Projected Revenue is defined as 110 percent of the Total Sales for the customer.
You need to calculate the Projected Revenue as efficiently as possible.
Which calculation should you use? (More than one answer choice may achieve the goal. Select the
BEST answer.)
A. Option B
B. Option A
C. Option D
D. Option C
Answer: D

QUESTION NO: 4
You are the database administrator of a SQL Server 2012 data warehouse implemented as a single database on a production server.
The database is constantly updated by using SQL Server Integration Services (SSIS) packages and SQL
Server Analysis Services (SSAS) cube writeback operations.
The database uses the full recovery model. A backup strategy has been implemented to minimize data loss in the event of hardware failure.
SQL Server Agent jobs have been configured to implement the following backup operations:
* A full database backup every day at 12:00 A.M.
* Differential database backups every day at 6:00 A.M., 12:00 P.M., and 6:00 P.M.
* Transaction log backups every hour on the hour.
At 2:38 P.M. a SSIS package corrupts the data in a fact table. The corruption cannot be undone. You are notified at 3:15 P.M. You immediately take the database offline to prevent further data access and modification.
You need to restore the data warehouse and minimize downtime and data loss.
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* (box 1)
/ For a database using the full or bulk-logged recovery model, in most cases you must back up the tail of the log before restoring the database. Restoring a database without first backing up the tail of the log results in an error, unless the RESTORE DATABASE statement contains either the WITH REPLACE or the WITH STOPAT clause, which must specify a time or transaction that occurred after the end of the data backup.
/ If the database is online and you plan to perform a restore operation on the database, before starting the restore operation, back up the tail of the log using WITH NORECOVERY:
BACKUP LOG database_name TO <backup_device> WITH NORECOVERY
* To restore a database to a specific point in time or transaction, specify the target recovery point in a STOPAT, STOPATMARK, or STOPBEFOREMARK clause.
* (incorrect, box 4): The STOPBEFOREMARK and STOPATMARK options have two parameters, mark_name and lsn_number. The mark_name parameter, which identifies a transaction mark in a log backup, is supported only in RESTORE LOG statements. The lsn_number parameter, which specifies a log sequence number, is supported in both RESTORE DATABASE statements and RESTORE LOG statements.

QUESTION NO: 5
You are designing an extract, transform, load (ETL) process for loading data from a SQL Server database into a large fact table in a data warehouse each day with the prior day's sales data.
The ETL process for the fact table must meet the following requirements:
* Load new data in the shortest possible time.
* Remove data that is more than 36 months old.
* Ensure that data loads correctly.
* Minimize record locking.
* Minimize impact on the transaction log.
You need to design an ETL process that meets the requirements.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Partition the destination fact table by customer. Use partition switching both to remove old data and to load new data into each partition.
B. Partition the destination fact table by date. Insert new data directly into the fact table and delete old data directly from the fact table.
C. Partition the destination fact table by date. Use partition switching and a staging table to remove old data. Insert new data directly into the fact table.
D. Partition the destination fact table by date. Use partition switching and staging tables both to remove old data and to load new data.
Answer: D

また、NewValidDumpsのMicrosoftのMicrosoft PL-200J試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。 最近、Microsoft　Microsoft MS-700-JPN試験に合格するのは重要な課題になっています。 IT認定試験の中でどんな試験を受けても、NewValidDumpsのCisco 300-615試験参考資料はあなたに大きなヘルプを与えることができます。 誠意をみなぎるMicrosoft　Salesforce CRT-403J試験備考資料は我々チームの専業化を展示されるし、最完全の質問と再詳細の解説でもって試験に合格するのを助けるます。 その中で、Salesforce CRT-101認定試験は最も重要な一つです。

Updated: May 28, 2022