まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。 ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。 では、他の人を頼んで試験に合格する対策を教えてもらったのですか。

Microsoftの070-412試験勉強過去問試験のために不安なのですか。

我々NewValidDumpsはMicrosoftの070-412 - Configuring Advanced Windows Server 2012 Services試験勉強過去問試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。 そうでない場合、今回使用してからあなたがNewValidDumpsを必要な選択肢として使用できるようになります。私たちが提供するMicrosoftの070-412 認定試験トレーリング試験のソフトウェアはITエリートによって数年以来Microsoftの070-412 認定試験トレーリング試験の内容から分析して開発されます、オンライン、PDF、およびソフトウェアが3つのバージョンあります。

競争力が激しい社会に当たり、我々NewValidDumpsは多くの受験生の中で大人気があるのは受験生の立場からMicrosoft　070-412試験勉強過去問試験資料をリリースすることです。たとえば、ベストセラーのMicrosoft　070-412試験勉強過去問問題集は過去のデータを分析して作成ます。ほんとんどお客様は我々NewValidDumpsのMicrosoft　070-412試験勉強過去問問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。

Microsoft 070-412試験勉強過去問 - 無料な部分ダウンロードしてください。

一回だけでMicrosoftの070-412試験勉強過去問試験に合格したい？NewValidDumpsは君の欲求を満たすために存在するのです。NewValidDumpsは君にとってベストな選択になります。ここには、私たちは君の需要に応じます。NewValidDumpsのMicrosoftの070-412試験勉強過去問問題集を購入したら、私たちは君のために、一年間無料で更新サービスを提供することができます。もし不合格になったら、私たちは全額返金することを保証します。

NewValidDumps のMicrosoftの070-412試験勉強過去問認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。NewValidDumps のMicrosoftの070-412試験勉強過去問問題集を利用することをお勧めいたします。

070-412 PDF DEMO:

QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server
2012 R2.
Server1 and Server3 are located in a site named Site1. Server2 and Server4 are located in a site named Site2.
The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
NodeWeight settings are used during quorum voting to support disaster recovery and multi-subnet scenarios for AlwaysOn Availability Groups and SQL Server Failover Cluster Instances.
Example (Powershell)
The following example changes the NodeWeight setting to remove the quorum vote for the
"AlwaysOnSrv1" node.
Import-Module FailoverClusters
$node = "AlwaysOnSrv1"
(Get-ClusterNode $node).NodeWeight = 0
Reference: Configure Cluster Quorum NodeWeight Settings.

QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has the File Server Resource Manager role service installed.
You attempt to delete a classification property and you receive the error message as shown in the exhibit.
(Click the Exhibit button.)
You need to delete the is Confidential classification property.
What should you do?
A. Clear the is Confidential classification property value of all files
B. Delete the classification rule that is assigned the is Confidential classification property
C. Set files that have an is Confidential classification property value of Yes to No
D. Disable the classification rule that is assigned the is Confidential classification property
Answer: B
Explanation
What is the File Classification Infrastructure?
The Windows Server 2008 R2 File Classification Infrastructure (FCI) automates classification processes so that you can manage your data more effectively.
You can save money and reduce risk by storing and retaining files based on their business value or impact.
The built-in solution for file classification provides expiration, custom tasks, and reporting. The extensible infrastructure enables you to meet additional customer classification needs by building rich end-to-end classification solutions that are built on the classification foundation of Windows
Server in a consistent and supported way and within the existing Windows file serving platforms.

QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2. You install the IP Address
Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server1, run the Add-IpamServerInventory cmdlet.
B. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
C. On Server2, create an IPv4 scope.
D. On Server1, uninstall the DHCP Server server role.
E. On Server2, run the Add-DhcpServerInDc cmdlet
Answer: A,E
Explanation
B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address
Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory.
C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD).
A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.
Reference: Add-IpamServerInventory; Add-DhcpServerInDC

QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
The Branch site contains a member server named Server1 that runs Windows Server 2012 R2.
You need to identify which domain controller authenticated the computer account of Server1.
What should you do?
A. Verify the value of the %SESSIONNAME% environment variable.
B. Verify the value of the %LOGONSERVER% environment variable.
C. Run nltest /sc_query.
D. Run nltest /dsgetsite.
Answer: B
Explanation
A. %LOGONSERVER% is the domain controller that authenticated the current user.
B. Reports on the state of the secure channel the last time that you used it. (The secure channel is the one that the NetLogon service established.) This parameter lists the name of the domain controller that you queried on the secure channel, also.
D. Returns the name of the site in which the domain controller resides.
http://technet.microsoft.com/en-us/library/cc753915(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc731935(v=ws.10).aspx

QUESTION NO: 5
You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run
Windows Server 2012 R2.
You need to force every node in Cluster1 to contact immediately the Windows Server Update
Services (WSUS) server on your network for updates.
Which tool should you use?
A. The Wusa command
B. The Wuauclt command
C. The Add-CauClusterRole cmdlet
D. The Invoke-CauScan cmdlet
Answer: C
Explanation
The Add-CauClusterRole cmdlet adds the Cluster-Aware Updating (CAU) clustered role that provides the self-updating functionality to the specified cluster. When the CAU clustered role has been added to a cluster, the failover cluster can update itself on the schedule that is specified by the user, without requiring an external computer to coordinate the cluster updating process.
Incorrect:
Not B. The wuauclt utility allows you some control over the functioning of the Windows Update
Agent. It is updated as part of Windows Update.
The following are the command line for wuauclt.
OptionDescription
/a /ResetAuthorization
Initiates an asynchronous background search for applicable updates. If Automatic Updates is disabled, this option has no effect.
/r /ReportNow
Sends all queued reporting events to the server asynchronously.
/? /h /help
Shows this help information.
Not D.
The Invoke-CauScan cmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.
Note: The Invoke-CauRun cmdlet performs a scan of cluster nodes for applicable updates and installs those updates via an Updating Run on the specified cluster.
Reference: Add-CauClusterRole
http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx

NewValidDumpsのMicrosoftのIIA IIA-CIA-Part1-JPN試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 NewValidDumpsのMicrosoftのPegasystems PEGACPLSA23V1「Configuring Advanced Windows Server 2012 Services」トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。 Salesforce Data-Cloud-Consultant - 我々の誠意を信じてください。 Huawei H19-301_V3.0 - NewValidDumpsを選ぶのは、成功を選ぶということになります。 自分のIT業界での発展を希望したら、MicrosoftのSalesforce Salesforce-Sales-Representative試験に合格する必要があります。

Updated: May 28, 2022