競争力が激しい社会に当たり、我々NewValidDumpsは多くの受験生の中で大人気があるのは受験生の立場からMicrosoft　070-412無料模擬試験試験資料をリリースすることです。たとえば、ベストセラーのMicrosoft　070-412無料模擬試験問題集は過去のデータを分析して作成ます。ほんとんどお客様は我々NewValidDumpsのMicrosoft　070-412無料模擬試験問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。 私もそう思いますが、IT認証は私にとって大変難しいです。でも、幸い私はインターネットでNewValidDumpsのMicrosoftの070-412無料模擬試験試験トレーニング資料を見つけました。 数年以来の整理と分析によって開発された070-412無料模擬試験問題集は権威的で全面的です。

Windows Server 2012 070-412 そうだったら、下記のものを読んでください。

どのようにすばらしい人になれますか？ここで、あなたに我々のMicrosoft　070-412 - Configuring Advanced Windows Server 2012 Services無料模擬試験試験問題集をお勧めください。 ここには、私たちは君の需要に応じます。NewValidDumpsのMicrosoftの070-412 最新試験問題集を購入したら、私たちは君のために、一年間無料で更新サービスを提供することができます。

弊社のMicrosoft　070-412無料模擬試験問題集を使用した後、070-412無料模擬試験試験に合格するのはあまりに難しくないことだと知られます。我々NewValidDumps提供する070-412無料模擬試験問題集を通して、試験に迅速的にパースする技をファンドできます。あなたのご遠慮なく購買するために、弊社は提供する無料のMicrosoft　070-412無料模擬試験問題集デーモをダウンロードします。

Microsoft 070-412無料模擬試験 - NewValidDumpsは君のもっともよい選択ですよ。

NewValidDumpsはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。NewValidDumpsは専門のIT業界での評判が高くて、あなたがインターネットでNewValidDumpsの部分のMicrosoft 070-412無料模擬試験「Configuring Advanced Windows Server 2012 Services」資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。

NewValidDumpsが提供するMicrosoftの070-412無料模擬試験認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。

070-412 PDF DEMO:

QUESTION NO: 1
You have a cluster named Cluster1 that contains two nodes. Both nodes run Windows Server
2012 R2.
Cluster1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You notice that VM1 is marked as being in a critical state in the cluster.
You verify that VM1 is functioning correctly.
You need to ensure that VM1 is no longer marked as being in a critical state.
Which cmdlet should you run?
A. Clear-ClusterNode
B. Remove-ClusterResourceDependency
C. Reset-ClusterVMMonitoredState
D. Remove-ClusterVmMonitoredItem
Answer: C
Explanation
Remove-ClusterVmMonitoredItem actually removes the monitoring so nothing will happen Remove-
ClusterResourceDependency - self explanatory has to do with dependencies, not critical state Reset
-ClusterVMMonitoredState - This cmdlet resets the Application Critical state of a virtual machine, so that the virtual machine is no longer marked as being in a critical state in the cluster Clear-
ClusterNode - This cmdlet helps ensure that the failover cluster configuration has been completely removed from a node that was evicted.
https://technet.microsoft.com/en-us/%5Clibrary/Hh847312(v=WPS.630).aspx

QUESTION NO: 2
Your network contains two Active Directory forests named contoso.com and corp.contoso.com.
User1 is a member of the DnsAdmins domain local group in contoso.com.
User1 attempts to create a conditional forwarder to corp.contoso.com but receive an error message shown in the exhibit. (Click the Exhibit button.)
You need to configure bi-directional name resolution between the two forests.
What should you do first?
A. Add User1 to the DnsUpdateProxy group.
B. Enable the Advanced view from DNS Manager.
C. Configure the zone to be Active Directory-integrated.
D. Run the New Delegation Wizard.
Answer: C
Explanation
The zone must be Active Directory-integrated.

QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains an IP Address Management (IPAM) server that uses a Windows Internal Database.
You install a Microsoft SQL Server 2012 instance on a new server.
You need to migrate the IPAM database to the SQL Server instance.
Which cmdlet should you run?
A. Move-IpamDatabase
B. Set-IpamConfiguration
C. Disable-IpamCapability
D. Update-IpamServer
Answer: A
Explanation
The Move-IpamDatabase cmdlet migrates the IP Address Management (IPAM) database to a
Microsoft SQL Server database. You can migrate from Windows Internal Database (WID) or from a
SQL Server database.
The cmdlet creates a new IPAM schema and copies all data from the existing IPAM database. After the cmdlet completes copying data, it changes IPAM configuration settings to refer to the new database as the IPAM database.
Reference: Move-IpamDatabase

QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2.
You need to configure the replication between the sites to occur by using change notification.
Which attribute should you modify?
Answer:
Explanation
Active Directory Replication Change Notification
* Right-click the site link object for the sites for which you want to enable change notification, and then click Properties.
* In the Select a property to view box, select options.
http://blogs.msdn.com/resized-image.ashx/__size/250x0/__key/communityserver-blogs- components-weblogfiles
* In the Edit Attribute box, if the Value(s) box shows <not set> , type 1 in the Edit Attribute box.
http://blogs.msdn.com/resized-image.ashx/__size/250x0/__key/communityserver-blogs- components-weblogfiles
* Click OK.
Reference: Active Directory Replication: Change Notification & You

QUESTION NO: 5
Your network contains an Active Directory domain named contoso.com.
The domain contains a main office and a branch office.
An Active Directory site exists for each office.
All domain controllers run Windows Server 2012 R2.
The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
DC1 hosts an Active Directory-integrated zone for contoso.com.
You add the DNS Server server role to DC2.
You discover that the contoso.com DNS zone fails to replicate to DC2.
You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.
You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.
Which tool should you use?
A. Ntdsutil
B. Active Directory Sites and Services
C. DNS Manager
D. Active Directory Domains and Trusts
Answer: B
Explanation
A. To control replication between two sites, you can use the Active Directory Sites and Services snap- in to configure settings on the site link object to which the sites are added. By configuring settings on a site link, you can control when replication occurs between two or more sites, and how often.
B. Ntdsutil.exe is a command-line tool that provides management facilities for Active Directory
Domain Services (AD DS) and Active Directory Lightweight Directory Services (AD LDS). You can use the ntdsutil commands to perform database maintenance of AD DS, manage and control single master operations, and remove metadata left behind by domain controllers that were removed from the network without being properly uninstalled.
C. DNS Manager is the tool you'll use to manage local and remote DNS Servers
D. Active Directory Domains and Trusts is the Microsoft Management Console (MMC) snap-in that you can use to administer domain trusts, domain and forest functional levels, and user principal name (UPN) suffixes.
http://technet.microsoft.com/en-us/library/cc731862.aspx
http://technet.microsoft.com/en-us/library/cc753343(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc722541.aspx
http://technet.microsoft.com/en-us/library/cc770299.aspx
Note: If you see question about AD Replication, First preference is AD sites and services, then
Repadmin and then DNSLINT.

Cisco 300-430 - NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。 現在、認証試験に合格したいのならNewValidDumps のMicrosoftのCisco 300-615トレーニング資料を利用してください。 Lpi 050-100 - そうしたらあなたはNewValidDumpsが用意した問題集にもっと自信があります。 NewValidDumps は各受験生のニーズを知っていて、あなたがSAP C_S4CS_2402認定試験に受かることに有効なヘルプを差し上げます。 NewValidDumpsにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってMicrosoft PRINCE2 PRINCE2Foundation-JPN認証試験に参加する方に対して問題集を研究続けています。

Updated: May 28, 2022