彼らはNewValidDumpsの問題集が有効なこと確認しました。NewValidDumpsが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。 たとえば、ベストセラーのMicrosoft　MS-100資格講座問題集は過去のデータを分析して作成ます。ほんとんどお客様は我々NewValidDumpsのMicrosoft　MS-100資格講座問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。 NewValidDumpsは専門家チームが自分の知識と経験をを利用してMicrosoftのMS-100資格講座「Microsoft 365 Identity and Services」認証試験の問題集を研究したものでございます。

Microsoft 365 MS-100 あなたは最高のトレーニング資料を手に入れました。

現在、MicrosoftのMS-100 - Microsoft 365 Identity and Services資格講座認定試験に受かりたいIT専門人員がたくさんいます。 MicrosoftのMS-100 最新知識認定試験というと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、あなたが大きなヘルプを得ることができます。

NewValidDumpsは優れたIT情報のソースを提供するサイトです。NewValidDumpsで、あなたの試験のためのテクニックと勉強資料を見つけることができます。NewValidDumpsのMicrosoftのMS-100資格講座試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。

Microsoft MS-100資格講座 - そうだったら、下記のものを読んでください。

NewValidDumpsは専門的で、たくさんの受験生のために、君だけのために存在するのです。それは正確的な試験の内容を保証しますし、良いサービスで、安い価格で営業します。NewValidDumpsがあれば、MicrosoftのMS-100資格講座試験に合格するのは心配しません。NewValidDumpsは君が最も早い時間でMicrosoftのMS-100資格講座試験に合格するのを助けます。私たちは君がITエリートになるのに頑張ります。

NewValidDumpsは君にとってベストな選択になります。ここには、私たちは君の需要に応じます。

MS-100 PDF DEMO:

QUESTION NO: 1
You have a Microsoft 365 subscription.
Your company deploys an Active Directory Federation Services (AD FS) solution.
You need to configure the environment to audit AD FS user authentication.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. From the Azure AO Connect server, run the Register-AzureADCConnectHealthSyncAgent cmdlet.
B. On an server, install Azure AD Connect Health for AD FS.
C. On a domain controller install Azure AD Connect Health for AD DS.
D. From all the AD FS servers, run audltpol.exe.
E. From all the domain controllers, run the set-AdminAuditLogConfig cmdlet and specify the -
LogiLevel parameter.
Answer: A,B
Explanation
To audit AD FS user authentication, you need to install Azure AD Connect Health for AD FS. The agent should be installed on an AD FS server. After the installation, you need to register the agent by running theRegister-AzureADConnectHealthSyncAgentcmdlet.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-health-agent-instal l
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-health-adfs

QUESTION NO: 2
You are configuring an enterprise application named TestApp in Microsoft Azure as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
References:
https://docs.microsoft.com/en-us/azure/active-directory/manage-apps/application-proxy-configure- hard-coded-lin

QUESTION NO: 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to assign User2 the required roles to meet the security requirements.
Solution: From the Office 365 admin center, you assign User2 the Security Reader role.
From the Exchange admin center, you assign User2 the Help Desk role.
Does this meet the goal?
A. NO
B. Yes
Answer: A
Explanation
* User2 must be able to view reports and schedule the email delivery of security and compliance reports.
The Security Reader role can view reports but not schedule the email delivery of security and compliance reports.
The Help Desk role cannot schedule the email delivery of security and compliance reports.
Reference:
https://docs.microsoft.com/en-us/exchange/permissions-exo/permissions-exo

QUESTION NO: 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has 3,000 users. All the users are assigned Microsoft 365 E3 licenses.
Some users are assigned licenses for all Microsoft 365 services. Other users are assigned licenses for only certain Microsoft 365 services.
You need to determine whether a user named User1 is licensed for Exchange Online only.
Solution: You launch the Azure portal, and then review the Licenses blade.
Does this meet the goal?
A. No
B. Yes
Answer: B
Explanation
In the Licenses blade, click All Products then select the E3 License. This will display a list of all users assigned an E3 license. Select User1. You'll see how many services are assigned in the Enabled
Services column. Click on the number in the Enabled Services column for User1 and you'll be taken to the licenses page for that user. Click on the number in the Enabled Services column for User1 again and a page will open which shows you exactly which services are enabled or disabled.
Alternatively, you can go into the user account properties directly then select Licenses. This will display the licenses blade for that user. You can then click on the number in the Enabled Services column for the user and a page will open which shows you exactly which services are enabled or disabled.

QUESTION NO: 5
Your company uses on-premises Windows Server File Classification Infrastructure 9FCI). Some documents on the on-premises file servers are classifies as Confidential.
You migrate the files from the on-premises file servers to Microsoft SharePoint Online.
You need to ensure that you can implement data loss prevention (DLP) policies for the uploaded files based on the Confidential classification.
What should you do first?
A. From the SharePoint admin center, create a managed property.
B. From the Security & Compliance Center PowerShell, run the
New-DlpComplianceRule cmdlet.
C. From the SharePoint admin center, configure hybrid search.
D. From the Security & Compliance Center PowerShell, run the
New-DataClassification cmdlet.
Answer: A
Explanation
Your organization might use Windows Server FCI to identify documents with personally identifiable information (PII) such as social security numbers, and then classify the document by setting the
Personally Identifiable Information property to High, Moderate, Low, Public, or Not PII based on the type and number of occurrences of PII found in the document. In Office 365, you can create a DLP policy that identifies documents that have that property set to specific values, such as High and
Medium, and then takes an action such as blocking access to those files.
Before you can use a Windows Server FCI property or other property in a DLP policy, you need to create a managed property in the SharePoint admin center.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/protect-documents-that-have-fci-or- other-properties

OMG OMG-OCSMP-MBI300 - NewValidDumpsを選ぶなら、絶対に後悔させません。 NewValidDumpsのMicrosoftのOracle 1z1-071試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。 私たちは最も新しくて、最も正確性の高いMicrosoftのCWNP CWSP-207試験トレーニング資料を提供します。 我々の目的はあなたにMicrosoftのAmazon DVA-C02-KR試験に合格することだけです。 MicrosoftのSalesforce Data-Cloud-Consultant-JPNソフトはあなたにITという職業での人材に鳴らせます。

Updated: May 28, 2022