NewValidDumpsは毎日異なる受験生に様々なトレーニング資料を提供します。彼らは当社の資料を利用してから試験に受かりました。これは当社が提供したMicrosoftのAZ-102無料問題トレーニング資料が本当に効果的なものということを証明しました。 また、AZ-102無料問題問題集に疑問があると、メールで問い合わせてください。現在IT技術会社に通勤しているあなたは、MicrosoftのAZ-102無料問題試験認定を取得しましたか？AZ-102無料問題試験認定は給料の増加とジョブのプロモーションに役立ちます。 あなたのニーズをよく知っていていますから、あなたに試験に合格する自信を与えます。

Microsoft Azure AZ-102 弊社の商品が好きなのは弊社のたのしいです。

Microsoft Azure AZ-102無料問題 - Microsoft Azure Administrator Certification Transition NewValidDumpsがあなたに美しい未来を与えることができることを信じてください。 NewValidDumps を選択して１００％の合格率を確保することができて、もし試験に失敗したら、NewValidDumpsが全額で返金いたします。

この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればNewValidDumpsは全額返金のことができますから、ご安心に問題集を利用してください。

Microsoft AZ-102無料問題 - NewValidDumpsを選んだら、成功への扉を開きます。

MicrosoftのAZ-102無料問題試験に参加するつもりの多くの受験生は就職しました。ほかのたくさんの受験生は生活の中でのことに挑戦しています。だから、我々は受験生の皆さんに一番効果的なMicrosoftのAZ-102無料問題復習方法を提供します。あなたは安心で我々の商品を購入できるために、我々は各バーションのMicrosoftのAZ-102無料問題復習資料のサンプルを提供してあなたに試させます。我々のMicrosoftのAZ-102無料問題復習資料を通して、いろいろな受験生はもうMicrosoftのAZ-102無料問題試験に合格しました。あなたは我々のソフトのメリットを感じられると希望します。

そうすると、あなたがいつでも最新バージョンの資料を持っていることが保証されます。NewValidDumpsはあなたが試験に合格するのを助けることができるだけでなく、あなたは最新の知識を学ぶのを助けることもできます。

AZ-102 PDF DEMO:

QUESTION NO: 1
You have an Azure subscription named Subscription1. Subscription1 contains the virtual networks in the following table.
Subscription1 contains the virtual machines in the following table:
The firewalls on all the virtual machines are configured to allow all ICMP traffic.
You add the peerings in the following table.
For each of the following statements, select Yest if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Box 1: Yes
Vnet1 and Vnet3 are peers.
Box 2: Yes
Vnet2 and Vnet3 are peers.
Box 3: No
Peering connections are non-transitive.
References:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid- networking/hub-spoke

QUESTION NO: 2
You have an Azure subscription that is used by four departments in your company. The subscription contains
10 resource groups. Each department uses resources in several resource groups.
You need to send a report to the finance department. The report must detail the costs for each department.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Assign a tag to each resource.
You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy.
After you apply tags, you can retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
Box 2: From the Cost analysis blade, filter the view by tag
After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in Azure portal.
* Visit the Subscriptions blade in Azure portal and select a subscription.
* You should see the cost breakdown and burn rate in the popup blade.
* Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data to populate.
* You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if you want to export the view to a Comma-Separated Values (.csv) file.
Box 3: Download the usage report
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started

QUESTION NO: 3
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete.
You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
You plan to allow connections between the VNET01-USEA2 and VNET01-USWE2 virtual networks.
You need to ensure that virtual machines can communicate across both virtual networks by using their private IP address. The solution must NOT require any virtual network gateways.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Virtual network peering enables you to seamlessly connect two Azure virtual networks. Once peered, the virtual networks appear as one, for connectivity purposes.
Peer virtual networks
Step 1. In the Search box at the top of the Azure portal, begin typing VNET01-USEA2. When VNET01-
USEA2 appears in the search results, select it.
Step 2. Select Peerings, under SETTINGS, and then select + Add, as shown in the following picture:
Step 3. Enter, or select, the following information, accept the defaults for the remaining settings, and then select OK.
Name: myVirtualNetwork1-myVirtualNetwork2 (for example)
Subscription: elect your subscription.
Virtual network: VNET01-USWE2 - To select the VNET01-USWE2 virtual network, select Virtual network, then select VNET01-USWE2. You can select a virtual network in the same region or in a different region.
Now we need to repeat steps 1-3 for the other network VNET01-USWE2:
Step 4. In the Search box at the top of the Azure portal, begin typing VNET01- USEA2. When VNET01
- USEA2 appears in the search results, select it.
Step 5. Select Peerings, under SETTINGS, and then select + Add.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal

QUESTION NO: 4
You create an Azure Migrate project named TestMig in a resource group named test- migration.
You need to discover which on-premises virtual machines to assess for migration.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Step 1: Download the OVA file for the collection appliance
Azure Migrate uses an on-premises VM called the collector appliance, to discover information about your on-premises machines. To create the appliance, you download a setup file in Open Virtualization
Appliance (.ova) format, and import it as a VM on your on-premises vCenter Server.
Step 2: Create a migration group in the project
For the purposes of assessment, you gather the discovered VMs into groups. For example, you might group VMs that run the same application. For more precise grouping, you can use dependency visualization to view dependencies of a specific machine, or for all machines in a group and refine the group.
Step 3: Create an assessment in the project
After a group is defined, you create an assessment for it.
References:
https://docs.microsoft.com/en-us/azure/migrate/migrate-overview

QUESTION NO: 5
You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access to any resource in the resource group named 7509086.
You need to create the Azure AD group and then to assign the correct to e to the group. The solution must use the principle of least privilege and minimize the number of role assignments.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Step 1:
Click Resource groups from the menu of services to access the Resource Groups blade
Step 2:
Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter corp7509086 as the Resource group name, and click the Create button.
Step 3:
Select Create.
Your group is created and ready for you to add members.
Now we need to assign a role to this resource group scope.
Step 4:
Choose the newly created Resource group, and Access control (IAM) to see the current list of role assignments at the resource group scope. Click +Add to open the Add permissions pane.
Step 5:
In the Role drop-down list, select a role Delegate administration, and select Assign access to:
resource group corp7509086
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal
https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azure- marketplace-resou

ただ、社会に入るIT卒業生たちは自分能力の不足で、EC-COUNCIL 212-89試験向けの仕事を探すのを悩んでいますか？それでは、弊社のMicrosoftのEC-COUNCIL 212-89練習問題を選んで実用能力を速く高め、自分を充実させます。 あるいは、無料で試験Microsoft SC-300問題集を更新してあげるのを選択することもできます。 現在、多くの外資系会社はMicrosoftのMicrosoft MB-230試験認定を持つ職員に奨励を与えます。 Oracle 1z1-808J - なぜ受験生のほとんどはNewValidDumpsを選んだのですか。 それで、弊社の専門家たちは多くの時間と精力を尽くし、Microsoft　SAP P-SAPEA-2023試験資料を研究開発されます。

Updated: May 28, 2022