NewValidDumpsのMicrosoftのAZ-102ダウンロード試験問題資料は質が良くて値段が安い製品です。我々は低い価格と高品質の模擬問題で受験生の皆様に捧げています。我々は心からあなたが首尾よく試験に合格することを願っています。 MicrosoftのAZ-102ダウンロード試験に関する権威のある学習教材を見つけないで、悩んでいますか？世界中での各地の人々はほとんどMicrosoftのAZ-102ダウンロード試験を受験しています。MicrosoftのAZ-102ダウンロードの認証試験の高品質の資料を提供しているユニークなサイトはNewValidDumpsです。 NewValidDumpsのMicrosoftのAZ-102ダウンロード試験トレーニング資料はIT人員の皆さんがそんな目標を達成できるようにヘルプを提供して差し上げます。

Microsoft Azure AZ-102 夢を持ったら実現するために頑張ってください。

Microsoft Azure AZ-102ダウンロード - Microsoft Azure Administrator Certification Transition NewValidDumpsを選ぶのは成功を選ぶのに等しいです。 きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。

あなたの利用するMicrosoftのAZ-102ダウンロードソフトが最新版のを保証するために、一年間の無料更新を提供します。人々は異なる目標がありますが、我々はあなたにMicrosoftのAZ-102ダウンロード試験に合格させるという同じ目標があります。この目標を達成するのは、あなたにとってIT分野での第一歩だけですが、我々のMicrosoftのAZ-102ダウンロードソフトを開発するすべての意義です。

Microsoft AZ-102ダウンロード - ここには、私たちは君の需要に応じます。

NewValidDumpsのAZ-102ダウンロード問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、NewValidDumpsのAZ-102ダウンロード問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

NewValidDumpsのMicrosoftのAZ-102ダウンロード試験トレーニング資料は試験問題と解答を含まれて、豊富な経験を持っているIT業種の専門家が長年の研究を通じて作成したものです。その権威性は言うまでもありません。

AZ-102 PDF DEMO:

QUESTION NO: 1
You have an Azure subscription named Subscription1. Subscription1 contains the virtual networks in the following table.
Subscription1 contains the virtual machines in the following table:
The firewalls on all the virtual machines are configured to allow all ICMP traffic.
You add the peerings in the following table.
For each of the following statements, select Yest if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Box 1: Yes
Vnet1 and Vnet3 are peers.
Box 2: Yes
Vnet2 and Vnet3 are peers.
Box 3: No
Peering connections are non-transitive.
References:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid- networking/hub-spoke

QUESTION NO: 2
You have an Azure subscription that is used by four departments in your company. The subscription contains
10 resource groups. Each department uses resources in several resource groups.
You need to send a report to the finance department. The report must detail the costs for each department.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Assign a tag to each resource.
You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy.
After you apply tags, you can retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
Box 2: From the Cost analysis blade, filter the view by tag
After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in Azure portal.
* Visit the Subscriptions blade in Azure portal and select a subscription.
* You should see the cost breakdown and burn rate in the popup blade.
* Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data to populate.
* You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if you want to export the view to a Comma-Separated Values (.csv) file.
Box 3: Download the usage report
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started

QUESTION NO: 3
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete.
You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
You plan to allow connections between the VNET01-USEA2 and VNET01-USWE2 virtual networks.
You need to ensure that virtual machines can communicate across both virtual networks by using their private IP address. The solution must NOT require any virtual network gateways.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Virtual network peering enables you to seamlessly connect two Azure virtual networks. Once peered, the virtual networks appear as one, for connectivity purposes.
Peer virtual networks
Step 1. In the Search box at the top of the Azure portal, begin typing VNET01-USEA2. When VNET01-
USEA2 appears in the search results, select it.
Step 2. Select Peerings, under SETTINGS, and then select + Add, as shown in the following picture:
Step 3. Enter, or select, the following information, accept the defaults for the remaining settings, and then select OK.
Name: myVirtualNetwork1-myVirtualNetwork2 (for example)
Subscription: elect your subscription.
Virtual network: VNET01-USWE2 - To select the VNET01-USWE2 virtual network, select Virtual network, then select VNET01-USWE2. You can select a virtual network in the same region or in a different region.
Now we need to repeat steps 1-3 for the other network VNET01-USWE2:
Step 4. In the Search box at the top of the Azure portal, begin typing VNET01- USEA2. When VNET01
- USEA2 appears in the search results, select it.
Step 5. Select Peerings, under SETTINGS, and then select + Add.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal

QUESTION NO: 4
You create an Azure Migrate project named TestMig in a resource group named test- migration.
You need to discover which on-premises virtual machines to assess for migration.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Step 1: Download the OVA file for the collection appliance
Azure Migrate uses an on-premises VM called the collector appliance, to discover information about your on-premises machines. To create the appliance, you download a setup file in Open Virtualization
Appliance (.ova) format, and import it as a VM on your on-premises vCenter Server.
Step 2: Create a migration group in the project
For the purposes of assessment, you gather the discovered VMs into groups. For example, you might group VMs that run the same application. For more precise grouping, you can use dependency visualization to view dependencies of a specific machine, or for all machines in a group and refine the group.
Step 3: Create an assessment in the project
After a group is defined, you create an assessment for it.
References:
https://docs.microsoft.com/en-us/azure/migrate/migrate-overview

QUESTION NO: 5
You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access to any resource in the resource group named 7509086.
You need to create the Azure AD group and then to assign the correct to e to the group. The solution must use the principle of least privilege and minimize the number of role assignments.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Step 1:
Click Resource groups from the menu of services to access the Resource Groups blade
Step 2:
Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter corp7509086 as the Resource group name, and click the Create button.
Step 3:
Select Create.
Your group is created and ready for you to add members.
Now we need to assign a role to this resource group scope.
Step 4:
Choose the newly created Resource group, and Access control (IAM) to see the current list of role assignments at the resource group scope. Click +Add to open the Add permissions pane.
Step 5:
In the Role drop-down list, select a role Delegate administration, and select Assign access to:
resource group corp7509086
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal
https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azure- marketplace-resou

MicrosoftのNetSuite NetSuite-Financial-User認証資格を取得すると、あなたは大きなヘルプを得ることができます。 SAP C-C4H56I-34 - 我々の誠意を信じてください。 あなたはうちのMicrosoftのSnowflake ARA-R01問題集を購入する前に、一部分のフリーな試験問題と解答をダンロードして、試用してみることができます。 自分のIT業界での発展を希望したら、MicrosoftのOracle 1z1-808J試験に合格する必要があります。 NewValidDumpsを選ぶなら、君がMicrosoftのSAP C_TS462_2022認定試験に合格するということできっと喜んでいます。

Updated: May 28, 2022