周りの多くの人は全部Microsoft　70-768資格模擬資格認定試験にパースしまして、彼らはどのようにできましたか。今には、あなたにNewValidDumpsを教えさせていただけませんか。我々社サイトのMicrosoft　70-768資格模擬問題庫は最新かつ最完備な勉強資料を有して、あなたに高品質のサービスを提供するのは70-768資格模擬資格認定試験の成功にとって唯一の選択です。 現在の時代で高効率は避けられない話題ですから、速いスピードと高効率が我々の目標です。受験の皆さんは速く知識を理解して高い点数を取得できるようにNewValidDumpsは効率的なトレーニング資料をデザインしてさしあげます。 そうすれば、あなたは簡単に70-768資格模擬復習教材のデモを無料でダウンロードできます。

MCSA 70-768 でも、成功へのショートカットがを見つけました。

NewValidDumpsのMicrosoftの70-768 - Developing SQL Data Models資格模擬試験トレーニング資料はIT認証試験を受ける全ての受験生が試験に合格することを助けるもので、受験生からの良い評価をたくさんもらいました。 最近、Microsoftの70-768 必殺問題集試験は非常に人気のある認定試験です。あなたもこの試験の認定資格を取得したいのですか。

あなたの利用するMicrosoftの70-768資格模擬ソフトが最新版のを保証するために、一年間の無料更新を提供します。人々は異なる目標がありますが、我々はあなたにMicrosoftの70-768資格模擬試験に合格させるという同じ目標があります。この目標を達成するのは、あなたにとってIT分野での第一歩だけですが、我々のMicrosoftの70-768資格模擬ソフトを開発するすべての意義です。

Microsoft 70-768資格模擬 - では、試験を心配するより、今から行動しましょう。

我々NewValidDumpsはMicrosoftの70-768資格模擬試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確の70-768資格模擬試験問題集を開発するのに準備します。

携帯電話にブラウザをインストールでき、 私たちの70-768資格模擬試験資料のApp版を使用することもできます。PC版は、実際の試験環境を模擬し、Windowsシステムのコンピュータに適します。

70-768 PDF DEMO:

QUESTION NO: 1
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server Analysis Services (SSAS) instance that is configured to use multidimensional mode. You create the following cube:
Users need to be able to analyze sales by product and color.
You need to create the dimension.
Which relationship type should you use between the InternetSales table and the new dimension?
A. no relationship
B. regular
C. fact
D. referenced
E. many-to-many
F. data mining
Answer: D
Explanation:
A reference dimension relationship between a cube dimension and a measure group exists when the key column for the dimension is joined indirectly to the fact table through a key in another dimension table, as shown in the following illustration.
A reference dimension relationship represents the relationship between dimension tables and a fact table in a snowflake schema design. When dimension tables are connected in a snowflake schema, you can define a single dimension using columns from multiple tables, or you can define separate dimensions based on the separate dimension tables and then define a link between them using the reference dimension relationship setting. The following figure shows one fact table named
InternetSales, and two dimension tables called Customer and Geography, in a snowflake schema.
You can create two dimensions related to the InternetSales measure group: a dimension based on the Customer table, and a dimension based on the Geography table. You can then relate the
Geography dimension to the InternetSales measure group using a reference dimension relationship using the Customer dimension.

QUESTION NO: 2
DRAG DROP
You install a SQL Server Analysis Services (SSAS) instance in tabular mode on a server.
While processing a very large tabular model, you receive an out-of-memory error. You identify that the amount of physical memory in the server is insufficient. Additional physical memory cannot be installed in the server.
You need to configure the server to allow paging to disk by using the operating system page file
(pagefile.sys).
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Explanation:
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* View or set configuration properties in Management Studio
*
In SQL Server Management Studio, connect to an Analysis Services instance.
In Object Explorer, right-click the Analysis Services instance, and then clickProperties.
The General page appears, displaying the more commonly used properties.
*
To view additional properties, click theShow Advanced (All) Propertiescheckbox at the bottom of the page.
Modifying server properties is supported only for tabular mode and multidimensional mode servers.
If you installed PowerPivot for SharePoint, always use the default values unless you are directed otherwise by a Microsoft product support engineer.
* VertiPaqPagingPolicy
Specifies the paging behavior in the event the server runs low on memory. Valid values are as follows:
Zero (0) is the default. No paging is allowed. If memory is insufficient, processing fails with an out-of- memory error.
1 enables paging to disk using the operating system page file (pagefile.sys).
When VertiPaqPagingPolicy is set to 1, processing is less likely to fail due to memory constraints because the server will try to page to disk using the method that you specified.
Setting the VertiPaqPagingPolicy property does not guarantee that memory errors will never happen.
Out of memory errors can still occur under the following conditions:
There is not enough memory for all dictionaries. During processing, Analysis Services locks the dictionaries for each column in memory, and all of these together cannot be more than the value specified for VertiPaqMemoryLimit.
There is insufficient virtual address space to accommodate the process.
To resolve persistent out of memory errors, you can either try to redesign the model to reduce the amount of data that needs processing, or you can add more physical memory to the computer.
Applies to tabular server mode only
* Incorrect: VertiPaqMemoryLimit
If paging to disk is allowed, this property specifies the level of memory consumption (as a percentage of total memory) at which paging starts. The default is 60. If memory consumption is less than 60 percent, the server will not page to disk.
This property depends on the VertiPaqPagingPolicyProperty, which must be set to 1 in order for paging to occur.
Applies to tabular server mode only.

QUESTION NO: 3
DRAG DROP
You need to configure the SalesAnalysis cube to correct the sales analysis by customer calculation.
Which four actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Open the cube editor, and open the Dimension Usage tab.
Step 2: Configure a relationship between the Customer dimension and the Sales measure group. Use
Day as the granularity.
From scenario: The SalesAnalysis cube contains a fact table named CoffeeSale loaded from a table named FactSale in the data warehouse.
The time granularity within the cube is 15 minutes.
The cube is processed every night at 23:00. You determine that the fact table cannot be fully processed in the expected time. Users have reported slow query response times.
Step 3: Reprocess the cube.
Step 4: Deploy the project changes.

QUESTION NO: 4
You are developing a SQL Server Analysis Services (SSAS) tabular project.
A column named City must be added to the table named Customer. The column will be used in the definition of a hierarchy. The City column exists in the Geography table that is related to the
Customer table.
You need to add the City column to the Customer table.
How should you write the calculation?
A. City:= LOOKUP(Geography[City],Geography[GeographyKey],[GeographyKey])
B. City:= LOOKUPVALUE(Geography[City],Geography[GeographyKey],[GeographyKey]) C
.=RELATED(Geography[City])
C. =RELATED(Geography.City)
D. =VALUES(Geography[City])
E. City:=VALUES(Geography[City])
Answer: C
Explanation: * RELATED Function
Returns a related value from another table.

QUESTION NO: 5
You are developing a SQL Server Analysis Services (SSAS) tabular project.
In the data warehouse, a table named Sales Persons and Territories defines a relationship between a salesperson's name, logon ID, and assigned sales territory.
You need to ensure that each salesperson has access to data from only the sales territory assigned to that salesperson. You need to use the least amount of development effort to achieve this goal.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Create a new role named Sales Persons with Read permission. Add each salesperson's logon as a member to the role.
B. Add the Sales Persons and Territories table to the model, define the relationships, and then implement dynamic security by using row filters. Grant each salesperson access to the model.
C. Create a new Active Directory Domain Services (AD DS) security group and add each salesperson as a member. Then create a new role named Sales Persons with Read permission. Add the group as a member to the new role.
D. Create a separate tabular model for each sales territory and assign each tabular model a corresponding sales territory name. Grant each salesperson access to the corresponding tabular model of the assigned sales territory.
Answer: B

ほんとんどお客様は我々NewValidDumpsのMicrosoft　Salesforce Customer-Data-Platform問題集を使用してから試験にうまく合格しましたのは弊社の試験資料の有効性と信頼性を説明できます。 ISC CISSP - しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。 だから、弊社の提供するSalesforce Salesforce-Data-Cloud-JPN問題集を暗記すれば、きっと試験に合格できます。 EMC D-AV-OE-23 - そして、NewValidDumpsに多くの受験生の歓迎されます。 Salesforce B2C-Commerce-Architect - NewValidDumpsは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。

Updated: May 28, 2022