現在IT技術会社に通勤しているあなたは、Microsoftの70-768復習教材試験認定を取得しましたか？70-768復習教材試験認定は給料の増加とジョブのプロモーションに役立ちます。短時間で70-768復習教材試験に一発合格したいなら、我々社のMicrosoftの70-768復習教材資料を参考しましょう。また、70-768復習教材問題集に疑問があると、メールで問い合わせてください。 我々は弊社の商品を選ぶお客様に責任を持っています。あなたの利用しているMicrosoftの70-768復習教材試験のソフトが最新版のを保証しています。 だから、我々社は力の限りで弊社のMicrosoft　70-768復習教材試験資料を改善し、改革の変更に応じて更新します。

MCSA 70-768 早くNewValidDumpsの問題集を君の手に入れましょう。

有効的なMicrosoft　70-768 - Developing SQL Data Models復習教材認定資格試験問題集を見つけられるのは資格試験にとって重要なのです。 君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにNewValidDumpsを選択してください。NewValidDumpsはまた一年間に無料なサービスを更新いたします。

今まで、たくさんのお客様はMicrosoft　70-768復習教材試験参考資料に満足しています。そのほかに、弊社は引き続くみんなに合理的な価格で高品質な70-768復習教材参考資料を提供します。もちろん、いいサービスを提供し、70-768復習教材参考資料について、何か質問がありましたら、遠慮なく弊社と連絡します。

Microsoft 70-768復習教材 - NewValidDumpsはこの問題を着々解決できますよ。

NewValidDumpsの70-768復習教材問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、NewValidDumpsは全額で返金することができます。あるいは、無料で試験70-768復習教材問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。

NewValidDumpsは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。

70-768 PDF DEMO:

QUESTION NO: 1
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server Analysis Services (SSAS) instance that is configured to use multidimensional mode. You create the following cube:
Users need to be able to analyze sales by product and color.
You need to create the dimension.
Which relationship type should you use between the InternetSales table and the new dimension?
A. no relationship
B. regular
C. fact
D. referenced
E. many-to-many
F. data mining
Answer: D
Explanation:
A reference dimension relationship between a cube dimension and a measure group exists when the key column for the dimension is joined indirectly to the fact table through a key in another dimension table, as shown in the following illustration.
A reference dimension relationship represents the relationship between dimension tables and a fact table in a snowflake schema design. When dimension tables are connected in a snowflake schema, you can define a single dimension using columns from multiple tables, or you can define separate dimensions based on the separate dimension tables and then define a link between them using the reference dimension relationship setting. The following figure shows one fact table named
InternetSales, and two dimension tables called Customer and Geography, in a snowflake schema.
You can create two dimensions related to the InternetSales measure group: a dimension based on the Customer table, and a dimension based on the Geography table. You can then relate the
Geography dimension to the InternetSales measure group using a reference dimension relationship using the Customer dimension.

QUESTION NO: 2
DRAG DROP
You install a SQL Server Analysis Services (SSAS) instance in tabular mode on a server.
While processing a very large tabular model, you receive an out-of-memory error. You identify that the amount of physical memory in the server is insufficient. Additional physical memory cannot be installed in the server.
You need to configure the server to allow paging to disk by using the operating system page file
(pagefile.sys).
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Explanation:
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* View or set configuration properties in Management Studio
*
In SQL Server Management Studio, connect to an Analysis Services instance.
In Object Explorer, right-click the Analysis Services instance, and then clickProperties.
The General page appears, displaying the more commonly used properties.
*
To view additional properties, click theShow Advanced (All) Propertiescheckbox at the bottom of the page.
Modifying server properties is supported only for tabular mode and multidimensional mode servers.
If you installed PowerPivot for SharePoint, always use the default values unless you are directed otherwise by a Microsoft product support engineer.
* VertiPaqPagingPolicy
Specifies the paging behavior in the event the server runs low on memory. Valid values are as follows:
Zero (0) is the default. No paging is allowed. If memory is insufficient, processing fails with an out-of- memory error.
1 enables paging to disk using the operating system page file (pagefile.sys).
When VertiPaqPagingPolicy is set to 1, processing is less likely to fail due to memory constraints because the server will try to page to disk using the method that you specified.
Setting the VertiPaqPagingPolicy property does not guarantee that memory errors will never happen.
Out of memory errors can still occur under the following conditions:
There is not enough memory for all dictionaries. During processing, Analysis Services locks the dictionaries for each column in memory, and all of these together cannot be more than the value specified for VertiPaqMemoryLimit.
There is insufficient virtual address space to accommodate the process.
To resolve persistent out of memory errors, you can either try to redesign the model to reduce the amount of data that needs processing, or you can add more physical memory to the computer.
Applies to tabular server mode only
* Incorrect: VertiPaqMemoryLimit
If paging to disk is allowed, this property specifies the level of memory consumption (as a percentage of total memory) at which paging starts. The default is 60. If memory consumption is less than 60 percent, the server will not page to disk.
This property depends on the VertiPaqPagingPolicyProperty, which must be set to 1 in order for paging to occur.
Applies to tabular server mode only.

QUESTION NO: 3
DRAG DROP
You need to configure the SalesAnalysis cube to correct the sales analysis by customer calculation.
Which four actions should you perform in sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Open the cube editor, and open the Dimension Usage tab.
Step 2: Configure a relationship between the Customer dimension and the Sales measure group. Use
Day as the granularity.
From scenario: The SalesAnalysis cube contains a fact table named CoffeeSale loaded from a table named FactSale in the data warehouse.
The time granularity within the cube is 15 minutes.
The cube is processed every night at 23:00. You determine that the fact table cannot be fully processed in the expected time. Users have reported slow query response times.
Step 3: Reprocess the cube.
Step 4: Deploy the project changes.

QUESTION NO: 4
You are developing a SQL Server Analysis Services (SSAS) tabular project.
A column named City must be added to the table named Customer. The column will be used in the definition of a hierarchy. The City column exists in the Geography table that is related to the
Customer table.
You need to add the City column to the Customer table.
How should you write the calculation?
A. City:= LOOKUP(Geography[City],Geography[GeographyKey],[GeographyKey])
B. City:= LOOKUPVALUE(Geography[City],Geography[GeographyKey],[GeographyKey]) C
.=RELATED(Geography[City])
C. =RELATED(Geography.City)
D. =VALUES(Geography[City])
E. City:=VALUES(Geography[City])
Answer: C
Explanation: * RELATED Function
Returns a related value from another table.

QUESTION NO: 5
You are developing a SQL Server Analysis Services (SSAS) tabular project.
In the data warehouse, a table named Sales Persons and Territories defines a relationship between a salesperson's name, logon ID, and assigned sales territory.
You need to ensure that each salesperson has access to data from only the sales territory assigned to that salesperson. You need to use the least amount of development effort to achieve this goal.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Create a new role named Sales Persons with Read permission. Add each salesperson's logon as a member to the role.
B. Add the Sales Persons and Territories table to the model, define the relationships, and then implement dynamic security by using row filters. Grant each salesperson access to the model.
C. Create a new Active Directory Domain Services (AD DS) security group and add each salesperson as a member. Then create a new role named Sales Persons with Read permission. Add the group as a member to the new role.
D. Create a separate tabular model for each sales territory and assign each tabular model a corresponding sales territory name. Grant each salesperson access to the corresponding tabular model of the assigned sales territory.
Answer: B

NewValidDumpsのITエリートたちは彼らの専門的な目で、最新的なMicrosoftのSAP C-TADM-23-JPN試験トレーニング資料に注目していて、うちのMicrosoftのSAP C-TADM-23-JPN問題集の高い正確性を保証するのです。 全てのMicrosoftのEMC D-SF-A-24「Developing SQL Data Models」試験は非常に大切ですが、この情報技術が急速に発展している時代に、NewValidDumpsはただその中の一つだけです。 MicrosoftのEC-COUNCIL ECSS認定試験に合格することはきっと君の職業生涯の輝い将来に大変役に立ちます。 NewValidDumps MicrosoftのOracle 1z0-071-JPN試験問題集はあなたが自分の目標を達成することを助けられます。 我々NewValidDumpsは一番効果的な方法を探してあなたにMicrosoftのCisco 400-007試験に合格させます。

Updated: May 28, 2022