自分のIT業界での発展を希望したら、Microsoftの70-762試験問題集試験に合格する必要があります。Microsoftの70-762試験問題集試験はいくつ難しくても文句を言わないで、我々NewValidDumpsの提供する資料を通して、あなたはMicrosoftの70-762試験問題集試験に合格することができます。Microsoftの70-762試験問題集試験を準備しているあなたに試験に合格させるために、我々NewValidDumpsは模擬試験ソフトを更新し続けています。 しかし、70-762試験問題集認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。 NewValidDumpsを選ぶのは最高のサービスを選んだことです。

MCP 70-762 心配なく我々の真題を利用してください。

MCP 70-762試験問題集 - Developing SQL Databases すべてのことの目的はあなたに安心に試験に準備さされるということです。 NewValidDumpsの70-762 資格参考書問題集を使用した後、あなたはたくさんのの70-762 資格参考書試験資料を勉強するとか、専門のトレーニング機構に参加するとかなど必要がないと認識します。NewValidDumps70-762 資格参考書問題集は試験の範囲を広くカバーするだけでなく、質は高いです。

試験に失敗したら、全額で返金する承諾があります。だから、Microsoftの70-762試験問題集試験に合格したいあなたは安心で弊社の商品を選べばいいんです。我々のMicrosoftの70-762試験問題集ソフトを利用してお客様の高通過率及び我々の技術の高いチームで、我々は自信を持って我々NewValidDumpsは専門的なのだと言えます。

Microsoft 70-762試験問題集 - では、試験を心配するより、今から行動しましょう。

我々NewValidDumpsはMicrosoftの70-762試験問題集試験問題集をリリースする以降、多くのお客様の好評を博したのは弊社にとって、大変な名誉なことです。また、我々はさらに認可を受けられるために、皆様の一切の要求を満足できて喜ぶ気持ちでずっと協力し、完備かつ精確の70-762試験問題集試験問題集を開発するのに準備します。

70-762試験問題集試験資料の3つのバージョンのなかで、PDFバージョンの70-762試験問題集トレーニングガイドは、ダウンロードと印刷でき、受験者のために特に用意されています。携帯電話にブラウザをインストールでき、 私たちの70-762試験問題集試験資料のApp版を使用することもできます。

70-762 PDF DEMO:

QUESTION NO: 1
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server database named DB1 that contains the following tables:
You frequently run the following queries:
There are no foreign key relationships between TBL1 and TBL2.
You need to minimize the amount of time required for the two queries to return records from the tables.
What should you do?
A. Create unique constraints on both TBL1 and TBL2. Create a partitioned view that combines columns from TBL1 and TBL2.
B. Create a nonclustered index on tbl2 only.
C. Create an indexed view that combines columns from TBL1 and TBL2.
D. Drop existing indexes on TBL1 and then create a clustered columnstore index. Create a nonclustered columnstore index on TBL1. Create a nonclustered index on TBL2.
E. Create check constraints on both TBL1 and tbl2. Create a partitioned view that combines columns from TBL1 and tbl2.
F. Drop existing indexes on TBL1 and then create a cluwered columnstore index. Create a nonclustered columnstore index on TBL1. Make no changes to TBL2.
G. Create a clustered index on TBL1 Create a nonclustered index on tbl2 and add the most frequently queried columns as included columns.
H. Create clustered indexes on TBL1 and TBL2.
Answer: F

QUESTION NO: 2
You manage a database with tables named Invoice and InvoiceDetails. Each invoice may have multiple records.
Users update the InvoiceDetails table by using a .NET web application. The application retrieves records from both tables and updates the tables by running an inline update statement.
Users experience slow performance when updating records in the application. The solution must meet the following requirements:
* Must use a stored procedure.
* Must not use inline update statements
* Must use a table-valued parameter.
* Must call the stored procedure to update all records.
You need to optimize performance.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Create a user-defined table type...
Table-valued parameters are declared by using user-defined table types. You can use table-valued parameters to send multiple rows of data to a Transact-SQL statement or a routine, such as a stored procedure or function, without creating a temporary table or many parameters.
Box 2: ..read-only input parameter.
Table-valued parameters must be passed as input READONLY parameters to Transact-SQL routines.
Box 3:
Example
The following example uses Transact-SQL and shows you how to create a table-valued parameter type, declare a variable to reference it, fill the parameter list, and then pass the values to a stored procedure.
USE AdventureWorks2012;
/* Create a table type. */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO
/* Create a procedure to receive data for the table-valued parameter. */ CREATE PROCEDURE dbo.
usp_InsertProductionLocation
@TVP LocationTableType READONLY
Etc.
/* Declare a variable that references the type. */
DECLARE @LocationTVP AS LocationTableType;
/* Add data to the table variable. */
INSERT INTO @LocationTVP (LocationName, CostRate)
SELECT Name, 0.00
FROM AdventureWorks2012.Person.StateProvince;
/* Pass the table variable data to a stored procedure. */
EXEC usp_InsertProductionLocation @LocationTVP;
GO
References:
https://docs.microsoft.com/en-us/sql/relational-databases/tables/use-table-valued-parameters- database-engine?vie

QUESTION NO: 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in the series.
You have a database named Sales that contains the following database tables. Customer, Order, and
Products.
The Products table and the order table shown in the following diagram.
The Customer table includes a column that stores the date for the last order that the customer placed.
You plan to create a table named Leads. The Leads table is expected to contain approximately 20,000 records.
Storage requirements for the Leads table must be minimized.
You need to begin to modify the table design to adhere to third normal form.
Which column should you remove for each table? To answer? drag the appropriate column names to the correct locations. Each column name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
In the Products table the SupplierName is dependent on the SupplierID, not on the ProductID.
In the Orders table the ProductName is dependent on the ProductID, not on the OrderID.
Note:
A table is in third normal form when the following conditions are met:
* It is in second normal form.
* All non-primary fields are dependent on the primary key.
Second normal form states that it should meet all the rules for First 1Normnal Form and there must be no partial dependencies of any of the columns on the primary key.
First normal form (1NF) sets the very basic rules for an organized database:
* Define the data items required, because they become the columns in a table. Place related data items in a table.
* Ensure that there are no repeating groups of data.
* Ensure that there is a primary key.
References: https://www.tutorialspoint.com/sql/third-normal-form.htm

QUESTION NO: 4
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:

QUESTION NO: 5
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.

たとえば、ベストセラーのMicrosoft　CheckPoint 156-315.81問題集は過去のデータを分析して作成ます。 Microsoft SC-100 - IT業界ではさらに強くなるために強い専門知識が必要です。 だから、弊社の提供するPegasystems PEGACPSSA23V1問題集を暗記すれば、きっと試験に合格できます。 Microsoft PL-200J - NewValidDumpsだけ全面と高品質の問題集があるのではNewValidDumpsの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。 ISACA CISA-JPN - NewValidDumpsにたくさんのIT専門人士がいって、弊社の問題集に社会のITエリートが認定されて、弊社の問題集は試験の大幅カーバして、合格率が１００％にまで達します。

Updated: May 28, 2022