われわれはあなたが弊社のMicrosoftの70-762復習過去問試験ソフトを購入して満足することに自信を持っています。利用してからあなたも弊社のMicrosoftの70-762復習過去問試験ソフトに自信を持っています。あなたは自信満々にMicrosoftの70-762復習過去問試験に参加することができます。 我々NewValidDumpsは一番効果的な方法を探してあなたにMicrosoftの70-762復習過去問試験に合格させます。弊社のMicrosoftの70-762復習過去問ソフトを購入するのを決めるとき、我々は各方面であなたに保障を提供します。 IT業界で発展したいなら、Microsoftの70-762復習過去問試験のような国際的な試験に合格するのは重要です。

MCP 70-762 できるだけ100％の通過率を保証使用にしています。

MCP 70-762復習過去問 - Developing SQL Databases それで、「就職難」の場合には、他の人々と比べて、あなたはずっと優位に立つことができます。 ただ、社会に入るIT卒業生たちは自分能力の不足で、70-762 サンプル問題集試験向けの仕事を探すのを悩んでいますか？それでは、弊社のMicrosoftの70-762 サンプル問題集練習問題を選んで実用能力を速く高め、自分を充実させます。その結果、自信になる自己は面接のときに、面接官のいろいろな質問を気軽に回答できて、順調に70-762 サンプル問題集向けの会社に入ります。

我々社のMicrosoft　70-762復習過去問問題集を購入するかどうかと疑問があると、弊社NewValidDumpsの70-762復習過去問問題集のサンプルをしてみるのもいいことです。試用した後、我々の70-762復習過去問問題集はあなたを試験に順調に合格させると信じられます。なぜと言うのは、我々社の専門家は改革に応じて問題の更新と改善を続けていくのは出発点から勝つからです。

Microsoft 70-762復習過去問問題集は唯一無にな参考資料です。

多分、70-762復習過去問テスト質問の数が伝統的な問題の数倍である。Microsoft　70-762復習過去問試験参考書は全ての知識を含めて、全面的です。そして、70-762復習過去問試験参考書の問題は本当の試験問題とだいたい同じことであるとわかります。70-762復習過去問試験参考書があれば,ほかの試験参考書を勉強する必要がないです。

NewValidDumpsを選られば、成功しましょう。わずか数年の中に、Microsoft 70-762復習過去問認定試験がたくさんの人の日常生活にとても大きい影響を与えています。

70-762 PDF DEMO:

QUESTION NO: 1
Note: This question is part of a series of questions that use the same or similar answer choices.
An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Microsoft SQL Server database named DB1 that contains the following tables:
You frequently run the following queries:
There are no foreign key relationships between TBL1 and TBL2.
You need to minimize the amount of time required for the two queries to return records from the tables.
What should you do?
A. Create unique constraints on both TBL1 and TBL2. Create a partitioned view that combines columns from TBL1 and TBL2.
B. Create a nonclustered index on tbl2 only.
C. Create an indexed view that combines columns from TBL1 and TBL2.
D. Drop existing indexes on TBL1 and then create a clustered columnstore index. Create a nonclustered columnstore index on TBL1. Create a nonclustered index on TBL2.
E. Create check constraints on both TBL1 and tbl2. Create a partitioned view that combines columns from TBL1 and tbl2.
F. Drop existing indexes on TBL1 and then create a cluwered columnstore index. Create a nonclustered columnstore index on TBL1. Make no changes to TBL2.
G. Create a clustered index on TBL1 Create a nonclustered index on tbl2 and add the most frequently queried columns as included columns.
H. Create clustered indexes on TBL1 and TBL2.
Answer: F

QUESTION NO: 2
You manage a database with tables named Invoice and InvoiceDetails. Each invoice may have multiple records.
Users update the InvoiceDetails table by using a .NET web application. The application retrieves records from both tables and updates the tables by running an inline update statement.
Users experience slow performance when updating records in the application. The solution must meet the following requirements:
* Must use a stored procedure.
* Must not use inline update statements
* Must use a table-valued parameter.
* Must call the stored procedure to update all records.
You need to optimize performance.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Create a user-defined table type...
Table-valued parameters are declared by using user-defined table types. You can use table-valued parameters to send multiple rows of data to a Transact-SQL statement or a routine, such as a stored procedure or function, without creating a temporary table or many parameters.
Box 2: ..read-only input parameter.
Table-valued parameters must be passed as input READONLY parameters to Transact-SQL routines.
Box 3:
Example
The following example uses Transact-SQL and shows you how to create a table-valued parameter type, declare a variable to reference it, fill the parameter list, and then pass the values to a stored procedure.
USE AdventureWorks2012;
/* Create a table type. */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO
/* Create a procedure to receive data for the table-valued parameter. */ CREATE PROCEDURE dbo.
usp_InsertProductionLocation
@TVP LocationTableType READONLY
Etc.
/* Declare a variable that references the type. */
DECLARE @LocationTVP AS LocationTableType;
/* Add data to the table variable. */
INSERT INTO @LocationTVP (LocationName, CostRate)
SELECT Name, 0.00
FROM AdventureWorks2012.Person.StateProvince;
/* Pass the table variable data to a stored procedure. */
EXEC usp_InsertProductionLocation @LocationTVP;
GO
References:
https://docs.microsoft.com/en-us/sql/relational-databases/tables/use-table-valued-parameters- database-engine?vie

QUESTION NO: 3
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in the series.
You have a database named Sales that contains the following database tables. Customer, Order, and
Products.
The Products table and the order table shown in the following diagram.
The Customer table includes a column that stores the date for the last order that the customer placed.
You plan to create a table named Leads. The Leads table is expected to contain approximately 20,000 records.
Storage requirements for the Leads table must be minimized.
You need to begin to modify the table design to adhere to third normal form.
Which column should you remove for each table? To answer? drag the appropriate column names to the correct locations. Each column name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
In the Products table the SupplierName is dependent on the SupplierID, not on the ProductID.
In the Orders table the ProductName is dependent on the ProductID, not on the OrderID.
Note:
A table is in third normal form when the following conditions are met:
* It is in second normal form.
* All non-primary fields are dependent on the primary key.
Second normal form states that it should meet all the rules for First 1Normnal Form and there must be no partial dependencies of any of the columns on the primary key.
First normal form (1NF) sets the very basic rules for an organized database:
* Define the data items required, because they become the columns in a table. Place related data items in a table.
* Ensure that there are no repeating groups of data.
* Ensure that there is a primary key.
References: https://www.tutorialspoint.com/sql/third-normal-form.htm

QUESTION NO: 4
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:

QUESTION NO: 5
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.

MicrosoftのOracle 1z0-076の認定試験に合格すれば、就職機会が多くなります。 Oracle 1z1-084 - 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。 Cisco 700-750 - あなたの全部な需要を満たすためにいつも頑張ります。 MicrosoftのOracle 1z1-071-JPN認定試験の合格証明書はあなたの仕事の上で更に一歩の昇進で生活条件が向上することが助けられます。 NewValidDumpsの専門家チームがMicrosoftのAmazon Data-Engineer-Associate-KR認証試験に対して最新の短期有効なトレーニングプログラムを研究しました。

Updated: May 28, 2022