Microsoftの70-412試験解説問題の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。Microsoftの70-412試験解説問題の認定試験は君の実力を考察するテストでございます。 毎年、たくさんの人が70-412試験解説問題試験に参加し、合格しました。あなたは70-412試験解説問題問題集を利用すれば、70-412試験解説問題試験に合格できますよ。 NewValidDumpsは君のために良い訓練ツールを提供し、君のMicrosoft認証試に高品質の参考資料を提供しいたします。

Windows Server 2012 70-412 きっと君に失望させないと信じています。

Windows Server 2012 70-412試験解説問題 - Configuring Advanced Windows Server 2012 Services それは確かにそうですが、その知識を身につけることは難しくないとといわれています。 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。NewValidDumps Microsoftの70-412 問題数試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。

NewValidDumpsが提供したMicrosoftの70-412試験解説問題「Configuring Advanced Windows Server 2012 Services」試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。

Microsoft 70-412試験解説問題 - 試験に良いの準備と自信がとても必要だと思います。

NewValidDumpsのMicrosoftの70-412試験解説問題試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。NewValidDumpsはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。

NewValidDumpsの商品は100%の合格率を保証いたします。NewValidDumpsはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。

70-412 PDF DEMO:

QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server
2012 R2.
Server1 and Server3 are located in a site named Site1. Server2 and Server4 are located in a site named Site2.
The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
NodeWeight settings are used during quorum voting to support disaster recovery and multi-subnet scenarios for AlwaysOn Availability Groups and SQL Server Failover Cluster Instances.
Example (Powershell)
The following example changes the NodeWeight setting to remove the quorum vote for the
"AlwaysOnSrv1" node.
Import-Module FailoverClusters
$node = "AlwaysOnSrv1"
(Get-ClusterNode $node).NodeWeight = 0
Reference: Configure Cluster Quorum NodeWeight Settings.

QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has the File Server Resource Manager role service installed.
You attempt to delete a classification property and you receive the error message as shown in the exhibit.
(Click the Exhibit button.)
You need to delete the is Confidential classification property.
What should you do?
A. Clear the is Confidential classification property value of all files
B. Delete the classification rule that is assigned the is Confidential classification property
C. Set files that have an is Confidential classification property value of Yes to No
D. Disable the classification rule that is assigned the is Confidential classification property
Answer: B
Explanation
What is the File Classification Infrastructure?
The Windows Server 2008 R2 File Classification Infrastructure (FCI) automates classification processes so that you can manage your data more effectively.
You can save money and reduce risk by storing and retaining files based on their business value or impact.
The built-in solution for file classification provides expiration, custom tasks, and reporting. The extensible infrastructure enables you to meet additional customer classification needs by building rich end-to-end classification solutions that are built on the classification foundation of Windows
Server in a consistent and supported way and within the existing Windows file serving platforms.

QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2. You install the IP Address
Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server1, run the Add-IpamServerInventory cmdlet.
B. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
C. On Server2, create an IPv4 scope.
D. On Server1, uninstall the DHCP Server server role.
E. On Server2, run the Add-DhcpServerInDc cmdlet
Answer: A,E
Explanation
B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address
Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory.
C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD).
A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.
Reference: Add-IpamServerInventory; Add-DhcpServerInDC

QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
The Branch site contains a member server named Server1 that runs Windows Server 2012 R2.
You need to identify which domain controller authenticated the computer account of Server1.
What should you do?
A. Verify the value of the %SESSIONNAME% environment variable.
B. Verify the value of the %LOGONSERVER% environment variable.
C. Run nltest /sc_query.
D. Run nltest /dsgetsite.
Answer: B
Explanation
A. %LOGONSERVER% is the domain controller that authenticated the current user.
B. Reports on the state of the secure channel the last time that you used it. (The secure channel is the one that the NetLogon service established.) This parameter lists the name of the domain controller that you queried on the secure channel, also.
D. Returns the name of the site in which the domain controller resides.
http://technet.microsoft.com/en-us/library/cc753915(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc731935(v=ws.10).aspx

QUESTION NO: 5
You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run
Windows Server 2012 R2.
You need to force every node in Cluster1 to contact immediately the Windows Server Update
Services (WSUS) server on your network for updates.
Which tool should you use?
A. The Wusa command
B. The Wuauclt command
C. The Add-CauClusterRole cmdlet
D. The Invoke-CauScan cmdlet
Answer: C
Explanation
The Add-CauClusterRole cmdlet adds the Cluster-Aware Updating (CAU) clustered role that provides the self-updating functionality to the specified cluster. When the CAU clustered role has been added to a cluster, the failover cluster can update itself on the schedule that is specified by the user, without requiring an external computer to coordinate the cluster updating process.
Incorrect:
Not B. The wuauclt utility allows you some control over the functioning of the Windows Update
Agent. It is updated as part of Windows Update.
The following are the command line for wuauclt.
OptionDescription
/a /ResetAuthorization
Initiates an asynchronous background search for applicable updates. If Automatic Updates is disabled, this option has no effect.
/r /ReportNow
Sends all queued reporting events to the server asynchronously.
/? /h /help
Shows this help information.
Not D.
The Invoke-CauScan cmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.
Note: The Invoke-CauRun cmdlet performs a scan of cluster nodes for applicable updates and installs those updates via an Updating Run on the specified cluster.
Reference: Add-CauClusterRole
http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx

また、NewValidDumpsのMicrosoftのNetwork Appliance NS0-521試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。 NewValidDumpsのMicrosoftのTableau TDA-C01-JPN認証試験の問題集はソフトウェアベンダーがオーソライズした製品で、カバー率が高くて、あなたの大量の時間とエネルギーを節約できます。 IT認定試験の中でどんな試験を受けても、NewValidDumpsのThe Open Group OGEA-103試験参考資料はあなたに大きなヘルプを与えることができます。 SAP P_SAPEA_2023 - 我々は低い価格と高品質の模擬問題で受験生の皆様に捧げています。 その中で、Microsoft AI-102J認定試験は最も重要な一つです。

Updated: May 28, 2022