弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてMicrosoftの70-412再テスト認定試験「Configuring Advanced Windows Server 2012 Services」の受験生が最良の選択であり、成功の最高の保障でございます。 Microsoft　70-412再テスト試験認定書はIT職員野給料増加と仕事の昇進にとって、大切なものです。それで、我々社の無料のMicrosoft　70-412再テストデモを参考して、あなたに相応しい問題集を入手します。 NewValidDumpsが短期な訓練を提供し、一回に君の試験に合格させることができます。

Windows Server 2012 70-412 きっと君に失望させないと信じています。

この質問を解決したいのなら、NewValidDumpsのMicrosoftの70-412 - Configuring Advanced Windows Server 2012 Services再テスト試験トレーニング資料を利用すればいいです。 我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。NewValidDumps Microsoftの70-412 学習指導試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。

それはいくつかの理由があります。第一、NewValidDumpsは受験生の要求をよく知っています。しかも、他のどのサイトよりも良いサービスを提供します。

Microsoft 70-412再テスト - NewValidDumpsは全面的に受験生の利益を保証します。

Microsoftの認証資格は最近ますます人気になっていますね。国際的に認可された資格として、Microsoftの認定試験を受ける人も多くなっています。その中で、70-412再テスト認定試験は最も重要な一つです。では、この試験に合格するためにどのように試験の準備をしているのですか。がむしゃらに試験に関連する知識を勉強しているのですか。それとも、効率が良い試験70-412再テスト参考書を使っているのですか。

長年の努力を通じて、NewValidDumpsのMicrosoftの70-412再テスト認定試験の合格率が１００パーセントになっていました。うちのMicrosoftの70-412再テスト試験問題集は完全な無制限のダンプが含まれているから、使ったら気楽に試験に合格することができます。

70-412 PDF DEMO:

QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server
2012 R2.
Server1 and Server3 are located in a site named Site1. Server2 and Server4 are located in a site named Site2.
The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
NodeWeight settings are used during quorum voting to support disaster recovery and multi-subnet scenarios for AlwaysOn Availability Groups and SQL Server Failover Cluster Instances.
Example (Powershell)
The following example changes the NodeWeight setting to remove the quorum vote for the
"AlwaysOnSrv1" node.
Import-Module FailoverClusters
$node = "AlwaysOnSrv1"
(Get-ClusterNode $node).NodeWeight = 0
Reference: Configure Cluster Quorum NodeWeight Settings.

QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has the File Server Resource Manager role service installed.
You attempt to delete a classification property and you receive the error message as shown in the exhibit.
(Click the Exhibit button.)
You need to delete the is Confidential classification property.
What should you do?
A. Clear the is Confidential classification property value of all files
B. Delete the classification rule that is assigned the is Confidential classification property
C. Set files that have an is Confidential classification property value of Yes to No
D. Disable the classification rule that is assigned the is Confidential classification property
Answer: B
Explanation
What is the File Classification Infrastructure?
The Windows Server 2008 R2 File Classification Infrastructure (FCI) automates classification processes so that you can manage your data more effectively.
You can save money and reduce risk by storing and retaining files based on their business value or impact.
The built-in solution for file classification provides expiration, custom tasks, and reporting. The extensible infrastructure enables you to meet additional customer classification needs by building rich end-to-end classification solutions that are built on the classification foundation of Windows
Server in a consistent and supported way and within the existing Windows file serving platforms.

QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2. You install the IP Address
Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server1, run the Add-IpamServerInventory cmdlet.
B. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
C. On Server2, create an IPv4 scope.
D. On Server1, uninstall the DHCP Server server role.
E. On Server2, run the Add-DhcpServerInDc cmdlet
Answer: A,E
Explanation
B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address
Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory.
C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD).
A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.
Reference: Add-IpamServerInventory; Add-DhcpServerInDC

QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
The Branch site contains a member server named Server1 that runs Windows Server 2012 R2.
You need to identify which domain controller authenticated the computer account of Server1.
What should you do?
A. Verify the value of the %SESSIONNAME% environment variable.
B. Verify the value of the %LOGONSERVER% environment variable.
C. Run nltest /sc_query.
D. Run nltest /dsgetsite.
Answer: B
Explanation
A. %LOGONSERVER% is the domain controller that authenticated the current user.
B. Reports on the state of the secure channel the last time that you used it. (The secure channel is the one that the NetLogon service established.) This parameter lists the name of the domain controller that you queried on the secure channel, also.
D. Returns the name of the site in which the domain controller resides.
http://technet.microsoft.com/en-us/library/cc753915(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/cc731935(v=ws.10).aspx

QUESTION NO: 5
You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run
Windows Server 2012 R2.
You need to force every node in Cluster1 to contact immediately the Windows Server Update
Services (WSUS) server on your network for updates.
Which tool should you use?
A. The Wusa command
B. The Wuauclt command
C. The Add-CauClusterRole cmdlet
D. The Invoke-CauScan cmdlet
Answer: C
Explanation
The Add-CauClusterRole cmdlet adds the Cluster-Aware Updating (CAU) clustered role that provides the self-updating functionality to the specified cluster. When the CAU clustered role has been added to a cluster, the failover cluster can update itself on the schedule that is specified by the user, without requiring an external computer to coordinate the cluster updating process.
Incorrect:
Not B. The wuauclt utility allows you some control over the functioning of the Windows Update
Agent. It is updated as part of Windows Update.
The following are the command line for wuauclt.
OptionDescription
/a /ResetAuthorization
Initiates an asynchronous background search for applicable updates. If Automatic Updates is disabled, this option has no effect.
/r /ReportNow
Sends all queued reporting events to the server asynchronously.
/? /h /help
Shows this help information.
Not D.
The Invoke-CauScan cmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.
Note: The Invoke-CauRun cmdlet performs a scan of cluster nodes for applicable updates and installs those updates via an Updating Run on the specified cluster.
Reference: Add-CauClusterRole
http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx

NewValidDumpsのMicrosoftのPegasystems PEGACPCSD23V1試験トレーニング資料を使ったら、君のMicrosoftのPegasystems PEGACPCSD23V1認定試験に合格するという夢が叶えます。 NewValidDumpsのMicrosoftのISQI CTAL-ATT試験トレーニング資料を利用すれば、認定試験に合格するのは簡単になります。 Cisco 300-430 - それは正確性が高くて、カバー率も広いです。 MicrosoftのSAP C-S4CPR-2402試験のほかの試験に参加するつもりでしたら、あなたも弊社のNewValidDumpsでふさわしいソフトを探すことができます。 我々はあなたに提供するのは最新で一番全面的なMicrosoftのCompTIA CV0-004問題集で、最も安全な購入保障で、最もタイムリーなMicrosoftのCompTIA CV0-004試験のソフトウェアの更新です。

Updated: May 28, 2022